Topology optimization in lightweight design of a 3D-printed flapping-wing micro aerial vehicle

Topology optimization is an effective method to obtain a lightweight structure that meets the requirements of structural strength. Whether the optimization results meet the actual needs mainly depends on the accuracy of the material properties and the boundary conditions, especially for a tiny Flapping-wing Micro Aerial Vehicle (FMAV) transmission system manufactured by 3D printing. In this paper, experimental and numerical computation efforts were undertaken to gain a reliable topology optimization method for the bottom of the transmission system. First, the constitutive behavior of the ultraviolet (UV) curable resin used in fabrication was evaluated. Second, a numerical computation model describing further verified via experiments. Topology optimization modeling considering nonlinear factors, e.g. contact, friction and collision, was presented, and the optimization results were verified by both dynamic simulation and experiments. Finally, detailed discussions on different load cases and constraints were presented to clarify their effect on the optimization. Our methods and results presented in this paper may shed light on the lightweight design of a FMAV.     

轨控大干扰下的系统角动量管理

摘要： 针对利用角动量交换装置系统实现轨控期间姿态维持的情况，研究当轨控推力器存在大力矩扰动时系统角动量管理方法.结合对地运行航天器轨道运动特性，分析轨控干扰力矩的积累角动量变化规律；考虑角动量管理装置系统的角动量存贮容量，基于角动量积累规律提出了一种结合偏置角动量建立与对称分布轨控位置选择的系统角动量管理方法，实现了对称轨控位置积累角动量互相抵消的自平衡效果，极大程度地提高轨控效率且避免系统角动量饱和现象.所提出的方法适用于喷气欠驱动控制系统，方法的有效性通过了数学仿真验证及在轨型号应用.     

An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model

An improved numerical method that can construct Halo/Lissajous orbits in the vicinity of collinear libration points in a full solar system model is investigated. A full solar system gravitational model in the geocentric rotating coordinate system with a clear presentation of the angular velocity relative to the inertial coordinate system is proposed. An alternative way to determine patch points in the multiple shooting method is provided based on a dynamical analysis with Poincare′sections. By employing the new patch points and sequential quadratic programming, Halo orbits for L_1, L_2, and L_3 points as well as Lissajous orbits for L_1 and L_2 points in the EarthMoon system are generated with the proposed full solar system gravitational model to verify the effectiveness of the proposed method.     

椭圆轨道卫星对地全球覆盖电推进控制

针对椭圆轨道卫星近/远地点的星下点对全球或特定纬度区域的访问问题，提出一种连续小推力下的对地覆盖控制策略。首先，推导了自然摄动对卫星拱线变化的影响，并探讨了进行小推力覆盖控制的必要性。然后，针对燃料消耗的优化问题，将控制方程展开成含傅里叶级数的形式，用以获得便于星上计算的解析形式的次优解，同时探讨了截取阶数与优化程度的关系。在进行拱线控制的同时，通过合理设置约束，对椭圆轨道的近地点高度进行保护，确保卫星安全运行。仿真结果表明，提出的方法能够以适当的燃料消耗代价实现椭圆轨道的近/远地点的全球覆盖控制或特定纬度区域的反复推扫，且控制力在可接受的范围内。     

某型制导雷达部分元器件失效模式的分析

对某型号制导雷达部分元器件进行了失效分析，找出了导致元器件失效的原因，指出设计是提高可靠性的关键，并根据有关元器件情况对生产方与使用方提出了建议。着重讨论了设计师应注意的问题和应该遵循的设计原则。针对失效情况，提出了一些具体的设计构想。     

表贴式永磁电机的两种充磁方式

研究了表贴式永磁电机的两种充磁方式。首先利用已有文献电机参数验证了有限元模型的正确性,对比分析了两种充磁方式下电机磁密和磁钢磁势的分布特点,研究表明内转子结构平行充磁方式具有提供更大的气隙磁通潜力,而外转子结构则相反。接着研究了两种充磁方式,不同气隙下气隙总磁通随极对数和磁钢厚度的变化规律。同时明确了两种充磁方式各自使用场合,给出了最佳磁钢厚度的取值范围。本文工作有助于正确选择表贴式永磁电机的充磁方式和磁钢厚度,以发挥磁钢潜力,改善电机性能。     

考虑胶层蠕变行为的胶接结构有限元分析

本文考虑胶层材料的蠕变行为，采用模拟岩层纹理单元的有限元法，分析工程中使用的典型胶接结构的应力场和位移场。数值结果表明，胶层蠕变行为对胶接结构位移和应力场均有较大影响     

精密机械零件的统计尺寸公差

精密机械产品的发展要求具有高性能、高可靠性和高质量。如果用设计时减小公关的方法来保证精度，则将难以解决加工和装配中产生的问题。因此需要在采用尽可能大的公差值的民政部下满足精度一文将讨论一些实例，寻找借助于统计尺寸公差降低加工精度要求的办法。     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

CFG桩复合地基应力比数值分析

本文采用有限元ANSYS程序对CFG桩复合地基的单桩桩体荷载传递规律、应力比及影响因素进行了分析,得出了减小应力比的方法和措施,对工程可起借鉴的作用。