ERG理论在房地产营销中的应用

在房地产营销中，我们根据ERG多层次需求理论，从S．T．P战略出发，将房地产市场进行细分（Segmentation）后，分析目标客户群（Targeting）并实施产品定位（Positioning）。通过进行4P营销组合，即满意的产品（Product）、适当的价格（Price）、有效的分销渠道（Place）和促销手段（Promotion）最终达到顾客满意。     

从国外航天遥感器系统的发展现状中得到的启示

文中对德国、法国、印度和美国航天光学遥感器研制情况的一个侧面进行了简述。从中可了解到其发展态势,即朝着大型综合性系统、小卫星系统以及各种卫星的综合协作方向发展。文中着重就综合性、组合式系统的特点稍展开分析。值得提出的是,多相机组合以多种模式选择功能以及任务使命排序工作,有时又可以“大像元”形式工作,这种设计可以解决数传或图像数据记录能力的不足,能完成多种、多类用户的要求。     

组合导航的自校正滤波控制

本文介绍了一种新的组合导航自校正滤波与控制方法，它是将卡尔曼滤波、参数辨识与自校正控制结合起来，从而提高了适应能力与误差补偿精度，文中分别讨论了误差模型、自校正滤波与自校正控制，并把它们统一起来，得到了封闭解。     

惯性导航/双星组合导航的可行性研究

根据国外惯性导航／卫星组合的研究、发展和应用情况，分析了惯性导航／双星组合的必要性和可实现性；提出了惯性导航／双星组合中存在的主要问题和可能的对策。研究结果表明，惯性导航系统(INS)和双星定位系统的组合是完全必要和可行的；惯性导航／双星组合系统的性能比纯惯性导航有明显提高。     

一种新型吸气式与火箭组合发动机(LOCE)及先进天地往返运输系统的发展

根据先进天地往返运输系统的要求和火箭与吸气式组合发动机的特点，提出了重复使用的单级入轨飞机吸气式组合发动机方案的优化原则和一种优化的组合发动机循环：高压氢膨胀液化氧气循环吸气式火箭组合发动机（LOCE）。它是一种以火箭技术为基础的吸气式组合发动机，比冲可达35000m／s，其关键是成功地解决了吸气式组合发动机和火箭发动机燃烧室压力的不匹配，其液化效率比普通LACE循环提高了5～7倍。可借用成熟火箭技术，推重比高是低速阶段（Ma＝0～5）的最佳方式之一。     

微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中，聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱，提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型，研究了重构过程中各运动模块对本体姿态的影响，提出当每两个运动模块位置与转动方向满足对称性条件时，两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论，在A*算法中引入最优分配度量和对称性判定，设计了并行对称重构规划算法。仿真结果表明，该规划算法可实现重构过程中多模块并行、对称运动，重构过程总步数较少，运动模块对本体姿态的影响小。     

组合航天器转动惯量在轨两步辨识标定

在轨辨识转动惯量参数是主动航天器与非合作空间目标构成组合体后实现高精度姿态控制的重要前提,文章提出了一种两步在轨辨识组合航天器转动惯量参数的方法。第一步以航天器本体坐标系滚动轴转动惯量为基准将转动惯量矩阵归一化,得到特殊的转动惯量比矩阵,建立与其相关的姿态动力学模型,提出了基于扩展卡尔曼滤波的在轨辨识算法,基于星上陀螺角速率测量信息在100s左右辨识出所有转动惯量比参数,克服了由于模型简单导致转动惯量信息辨识不完整的缺点;第二步基于第一步辨识得到的转动惯量比参数,采用最小二乘算法辨识得到滚动轴转动惯量值,计算量小,消耗能量少。最后给出仿真算例,辨识精度基本在1|之内,验证了方法的有效性。     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

Analysis of the DORIS contributions to ITRF2008

In its function as an ITRS Combination Centre, DGFI is in charge with the computation of an ITRF2008 solution. The computation methodology of DGFI is based on the combination of datum-free normal equations (weekly or session data sets, respectively) of station positions and Earth orientation parameters (EOP) from the geodetic space techniques DORIS, GPS, SLR and VLBI. In this paper we focus on the DORIS part within the ITRF2008 computations. We present results obtained from the analysis of the DORIS time series for station positions, network translation and scale parameters, as well as for the terrestrial pole coordinates. The submissions to ITRF2008 benefit from improved analysis strategies of the seven contributing IDS analysis centres and from a combination of the weekly solutions of station positions and polar motion. The results show an improvement by a factor of two compared to past DORIS data submitted to ITRF2005, which has been evaluated by investigating the repeatabilities of position time series. The DORIS position time series were analysed w.r.t. discontinuities and other non-linear effects such as seasonal variations. About 40 discontinuities have been identified which have been compared with the results of an earlier study. Within the inter-technique combination we focus on the DORIS contribution to the integration of the different space geodetic observations and on a comparison of the geodetic local ties with the space geodetic solutions. Results are given for the 41 co-location sites between DORIS and GPS.     

机载计算机标准机箱的“三化”工作

介绍了机载计算机标准机箱的“三化”研究、设计和生产概况及当前水平。提出了标准机箱真正达到货架式通用化、系列化、组合化产品水平的设想。