多臂空间机器人的视觉伺服与协调控制

针对多臂空间机器人自主目标抓捕任务，首先建立多臂空间机器人的运动模型和其与目标的相对运动模型，采用Kane方法建立多臂空间机器人的动力学模型；其次，研究基于视觉伺服的机械臂在线轨迹规划算法，并引入零反作用机动，消除机械臂运动对平台姿态的扰动；再次，在不使用零反作用机动功能时，分别使用基于角动量前馈补偿的协调控制算法和逆动力学方法设计了协调控制器，在机械臂运动时保持平台姿态和相对目标的位置。最后，开发了基于Matlab的仿真软件MASS（多臂空间机器人仿真），仿真结果校验了上述方法的有效性。     

Wind asymmetries in massive stars

We are in the process of surveying the linear polarization in luminous, early-type stars. We here report on new observations of the B [e] stars S 18 and R 50, and of the Luminous Blue Variables HR Car, R 143, and HD 160529. Together with previously published data, these observations provide clear evidence for the presence of intrinsic polarization in 1 B[e] star (HD 34664) and in 5 LBVs ( Car, P Cyg, R 127, AG Car, and HR Car). The data indicate that anisotropic stellar winds are a common occurrence among massive stars in these particular evolutionary stages. For such stars, mass-loss rates estimated using the assumption of a spherical, homogeneous and stationary outflow may be in error.     

确定微动疲劳寿命的附加应力法

通过引进新的微动疲劳参数 ,对微动疲劳寿命进行定量分析。将微动作用的效果作为一种附加应力 ,与普通力学分析中得到的宏观应力一起作为总应力作用于构件。用这个总应力按疲劳寿命计算公式或对照疲劳寿命S -N曲线得到疲劳寿命 ,这个疲劳寿命就是微动疲劳寿命。这种方法称为附加应力法。     

Initial nighttime ionospheric observations with advanced ionospheric probe onboard FORMOSAT-5

FORMOSAT-5 satellite was launched into a sun-synchronous orbit at 720 km altitude with 98.28° inclination on 25 August 2017. The onboard scientific payload, Advanced Ionospheric Probe (AIP) is capable of measuring topside ionospheric ion density, cross-track flow velocities, ion composition and temperature, and electron temperature. Initial observations of nighttime midlatitude ionospheric density and vertical flow velocity variations at 2230 LT sector during a few quiet magnetic days in December 2017 are studied here. Longitudinal density variations in the equatorward edge of midlatitude ionospheric trough (MIT) region are noticed. Accompanied with this density variation, the vertical flow velocities also behave differently. Although the density difference has been stated due to zonal wind effect related to the declination of the geomagnetic field lines, the vertical flow velocity variation seems to play the opposite role. All these density and vertical flow observations in the northern winter hemisphere can only be explained by the longitudinal differences in the diffusion velocity coming down from the protonsphere (plasmasphere). In addition, the hemispheric asymmetry in the vertical flow velocity can also be explained by the interaction between the topside ionosphere and the protonsphere. The observed vertical flow variations near MIT at different longitudes should present a new potential tool for the study of MIT formation.     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

Nb/Nb5Si3微叠层材料及其制备技术

Nb/Nb5Si3合金是未来最具潜力的超高温结构材料,实现该材料的结构微叠层化是一种新颖的材料设计思路和制备方法.Nb/Nb5Si3微叠层材料是将Nb和Nb5Si3按一定的层间距及层厚比以ABABAB型交互重叠结构形成的多层材料,其几种典型的制备技术包括热压、等离子喷涂、磁控溅射和电子束物理气相沉积(EB-PVD).其中EB-PVD是一种最适合工程应用的Nb/Nb5Si3微叠层材料制备方法,结构和功能复合、纳米化叠层、高韧化工艺是EB-PVD技术制备Nb/Nb5Si3微叠层材料的发展方向.     

工业CT检测技术在5 kN发动机研制中的应用

针对5 kN发动机结构焊缝和复合材料喷管不可检不可测的难题,开展了工业CT检测技术研究。分析了复杂结构焊缝和复合材料喷管的常规方法检测难点,利用工业CT检测技术穿透能力强、不受工件复杂结构影响的优势,对5 kN发动机产品中的电子束焊缝、氩弧焊焊缝、复合材料喷管等结构进行了检测试验,得到了良好的检测效果。结果表明,工业CT检测技术可以识别5 kN发动机产品中的气孔、未焊透、分层、裂纹等缺陷,并实现对缺陷的定位与测量,可为焊缝质量评估提供依据。     

超声波铣床基于CATIA V5复合材料蜂窝件数控编程方法研究

本文针对超声五坐标数控加工设备的蜂窝数控加工方法及后处理特性进行分析,开展了在CATIAV5软件中相应编程方法和体系研究,开发了满足该设备数控编程需要的基于CATIAV5的资源库,制定了相应的编程方法规范。     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。     

嫦娥三号着陆器统计定位精度分析

“嫦娥三号”将在月球放置着陆器,实现月面软着陆,因此,需要对着陆器进行精确定位.本文简述了月球着陆器的统计定位方法与协方差分析理论,分析了影响统计定位精度的主要误差源.基于现有测控条件,从跟踪弧段和测量数据组合2个方面,对“嫦娥三号”着陆器的定位精度进行了分析.针对短弧条件下单站测距数据定位不稳键的问题,提出了结合月面高程约束的定位方法.协方差分析结果表明：高程数据的使用可以实现单站30 min测距优于1 km的定位精度;当观测数据累积至3d时,单站测量与VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）的不同组合可以实现同等量级、优于百m的定位精度;测量系统差是制约定位精度的主要因素,完全标校测量的系统偏差则能实现10 m左右的定位精度.