A comprehensive survey on the methods of angle of attack measurement and estimation in UAVs

Angle of Attack (AOA) is a crucial parameter which directly affects the aerodynamic forces of an aircraft. The measurement of AOA is required to ensure a safe flight within its designed flight envelop. This paper intends to summarise a comprehensive survey on the measurement techniques and estimation methods for AOA, specifically in Unmanned Aerial Vehicle (UAV) applications. In the case of UAVs, weight constraint plays a major role as far as sensor suites are concerned. This results in selecting a suitable estimation method to extract AOA using the available data from the autopilot. The most feasible and widely employed AOA measurement technique is by using the Multi-Hole Probes (MHPs). The MHP measures the AOA regarding the pressure variations between the ports. Due to the importance of MHP in AOA measurement, the calibration methods for the MHP are also included in this paper. This paper discusses the AOA measurement using virtual AOA sensors, their importance and the operation.     

Variation of dayside chorus waves associated with solar wind dynamic pressure based on MMS observations

The whistler-mode chorus waves are one of the most important plasma waves in the Earth’s magnetosphere. Generally, the amplitude of whistler-mode chorus waves prefers to strengthen when the energetic fluxes of anisotropic electrons increase outside the plasmapause. This characteristic is commonly associated with the geomagnetic storms or substorms. However, the relationship between the solar wind dynamic pressure (P_sw) and the long-time variation of chorus waves during the quiet period of the geomagnetic activity still needs more detailed investigations. In this paper, based on MMS observations, we present a chorus event just observed in the inner side of magnetopause without obvious geomagnetic storms or substroms. Interestingly, during this time interval, some P_sw fluctuations were recorded. Both the amplitudes and frequencies of chorus waves changed as a response to the variation in P_sw. It proved that the enhancement of P_sw increases the energetic electrons fluxes, which provides free energies for the chorus amplification. Furthermore, the wave growth rates calculated using linear theory increases and the central frequency of the chorus waves shifts to a higher frequency when the P_sw enhancement is greater, which are also consistent well with the observations. The results provide a direct evidence that the P_sw play an important role in the long-time variation of whistler-mode chorus waves inside the magnetopause.     

基于变马赫数的五孔探针三维插值方法

探讨了五孔探针气动数据的插值方法,为提高插值精度,开发了基于传统线性插值法的三维线性插值法。该方法把同一探针在不同马赫数下的校准图形成三维数据库,将实验数据通过三维图进行插值。并使用改进前后的两种插值方法分别对校准风洞测得的数据进行整理,对比结果证明:在实验工况连续变化的情况下,三维线性插值法在插值精度上要优于传统线性插值法。特别是在来流马赫数变化较大时,该方法可以改善单一校准文件处理造成的数据精度问题,可用于自动化流场采集系统,为流场高速高精度采集奠定基础。     

Wave-Particle-Electric Field Synergetic Auroral Electron Acceleration

Space Science Reviews - We discuss afresh the problem of the auroral electron acceleration based on the controversy reports of Bryant, D. A. et al.: 1992, Phys. Rev. Lett. 68, 37, and Borovsky, J.:...     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

同轴探针对称激励矩形波导模式谱图研究

通过理论分析证明，同轴探针对称激励矩形波导时，其模式谱图中不存在引起合成场结构不对称的高次模TE20及TE01模。应用分式线性变换检测法进行了对比测试，验证了理论分析结果的正确性。对聚四氟乙烯样品，在7—16GHz频带内测量其复介电常数均有较高的测量精度。实验表明，在一定条件下，标准三公分波导工作频率可高达16GHz，如果取波导宽窄边比r=3，工作频率可达19GHz。所得结果对于微波材料宽带测量具有实用价值。     

论航天火星探测

回顾了 2 0世纪航天火星探测的历史和成就 ,论述了火星探测器飞行轨道的特点 ,展望了 2 1世纪初期航天火星探测的前景     

电子会议系统在型号产品研制中的应用

计算机技术和通信技术的结合把计算机从传统的孤立应用推进到支持群体协同工作，从而产生了计算机支持的协同工作和多媒体电子会议系统等新型应用。本文结合本单位的实际，进行了基于Sametime电子会议协同研制工作的研究，详细论述了型号研制对电子会议系统的要求及其实现。     

丁羟推进剂拉伸断裂行为的扫描电镜研究

利用扫描电镜及附属微型动态拉伸装置实验手段，对丁羟基复合固体推进剂进行了断口微观形貌观察和电镜微型拉伸试件在应变状上的断裂行为分析。结果表明，从推进剂拉伸力学行为的微观结构变化以预示其宏 同力学性能，改善丁羟推进剂粘合剂与固体颗粒之间的界面性质，是固体推进剂力学性能的一个重要方向。     

模型烧蚀对尾迹电子特性影响的计算和实验研究

 基于气动物理研究的需要，针对高焓风洞的来流特点，采用计算和实验相结合的方法研究聚丙烯烧蚀对尾迹电子密度的影响。结果表明：计算结果可以有效模拟实验状态，电子密度的模拟精度有很大提高，误差在一个量级内；聚丙烯烧蚀可以降低尾迹的电子密度，但幅度不大，在2倍左右，其与选择模型材料的催化特性降低幅度相当；对电弧风洞的成功改进和非稀薄流静电探针诊断技术的应用，是尾迹电子密度测试的前提保障。