硝酸羟胺水溶液的制备及其含量分析

以复分解法制备硝酸羟胺(HAN)水溶液，用正交实验分析了反应温度、反应时间和减压蒸馏温度对反应产率的影响。确定的实验室最佳制备条件为：反应时间25min，反应温度60℃，减压蒸馏温度50℃。并比较了氧化还原滴定法与酸碱滴定法测定硝酸羟胺水溶液中硝酸羟胺含量的精度。     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

民用飞机预研论证权威真相源构建技术

权威真相源不仅是基于模型的系统工程实施的核心要素,也是"数字工程战略"的关键环节。对权威真相源构建技术进行了研究,包括对权威真相源进行了定义和分析,设计了权威真相源的构建目标和原则,构建了权威真相源的架构和业务流程,并对构建权威真相源的支持技术进行了研究。梳理了民用飞机预研论证的业务流程、专业模型和基础模型,最后通过民用飞机预研论证验证机的案例研究,证实了权威真相源构建技术的可行性。民用飞机预研论证权威真相源能够有效提升系统工程的组织性,提升协同设计效率,同时能够提高模型和系统设计的重用性,减少系统工程实施的复杂度,缩小开发成本。     

Research on Maintainability Evaluation Model Based on Fuzzy Theory

分析了产品维修性影响属性,给出了维修性属性值与权重的确定方法;提出了基于相对接近度的维修性模糊评价方法。以虚拟环境下产品维修过程为研究对象,在分析产品各可更换单元的维修作业的基础上,建立了产品维修性评价模型。最后结合民机主起落架系统给出了应用实例,结果表明该模型适用于产品维修性的定性评价并且能够支持维修性并行设计。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

基于RISC芯片的32位嵌入式基本系统的设计和调试

基于ＲＩＳＣ芯片的３２位嵌入式基本系统的研究和设计是当前嵌入式星载计算机研制方面的一个重要课题，着重介绍了该ＲＩＳＣ基本系统的设计特点以及所使用的构思新颖的调试方法等两方面的研究情况。     

Dynamic Response Analysis of Bird Strike on Aircraft Windshield Based on Damage-modified Nonlinear Viscoelastic Constitutive Relation

Damage-modified nonlinear viscoelastic constitutive equation and failure criterion are introduced and the three-dimensional incremental forms are deduced based on the updated Lagrangian approach. A simple tensile test model and a split Hopkinson pressure bar model are built to verify the accuracy of the subroutine implemented within the non-linear finite element program LS-DYNA. A numerical model of bird strike on windshield is established to study the responses of windshield under three different bird velocities at three sites. The bird is represented by a cylinder with a hemisphere at each end and the contact-impact coupling algorithm is used in this study. It is found that the implemented subroutine can properly describe the mechanical behavior of polymethyl methacrylate under low and high strain rates and large deformation, and can be used validly.     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.