A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题，基于动态分层动网格技术，构建了含导弹运动和二次燃烧的内弹道数值模型，并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度，导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥，较大程度地缓解了冲击现象，获得了较好的平滑效果，筒底压力较实验装置降低了24.5%。     

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

采用扫描电镜原位观测的方法,动态跟踪观察拉伸载荷作用下航空发动机轴类超高强度钢MA250中不同形状和尺寸的TiN夹杂导致裂纹萌生与扩展的微观行为,从微观角度分析拉伸载荷作用下夹杂物的几何长轴与外加载荷方向成不同角度时裂纹的萌生方式.同时讨论TiN夹杂中第一条裂纹萌生所需的应力与夹杂物面积的关系.结果表明,夹杂物面积越大,第一条裂纹萌生所需的应力越小.     

在二元柔壁自适应风洞中利用面元法进行三元模型实验

简要叙述了在西北工业大学二元柔壁自适应风洞中利用面元法进行二元半机翼模型试验的研究情况，分析了面元法的基本思想和部分试验结果。     

深基坑支护——土钉墙的应用

介绍了土钉墙的基本原理和应用范围，通过土钉墙在南方某地铁车站的具体实例，说细介绍了土钉墙的施工工艺及施工方法，总结了土钉墙在应用中常见的问题及处理措施。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

喷管内型面烧蚀对发动机能量的影响

根据同一推进剂不同结构的两种型号发动机的试验结果，分析了喷管内型面烧蚀对发动机能量影响，提出了在两种烧蚀率相差较大的材料之间镶嵌一种烧蚀率适中的材料，可减少喷管内型面的烧蚀，提高喷管推力效率。     

短肢剪力墙结构的自由振动特性分析

采用连续化方法导出了短肢剪力墙结构在任意高度侧向集中荷载的作用下的侧移曲线方程，由此得到该结构的抗侧移柔度系数，进而得出结构的抗侧移刚度矩阵。应用抗侧移刚度矩阵对各种整体性系数和肢强系数的短肢剪力墙结构进行了动力特性分析，研究其对结构动力特性的影响。结果表明，当肢强系数不变时，随整体性系数的增加，短肢剪力墙的前两阶振型的振动周期显著减小，而其他高阶振型的振动周期变化很小；当整体性系数不变时，短肢剪力墙的前两阶振型的振动周期随肢强系数的增加显著减小，而其他高阶振型的振动周期变化不大。     

跨音速翼型风洞的洞壁干扰研究

利用三个几何相似的 RAE104翼型模型,用实验方法确定西工大翼型风洞(TAWX)的无堵塞干扰开闭比。对于不带测压轨及带测压轨两种状态的开槽壁分别采用2%及4%开闭比可认为近似于无堵塞干扰。利用测压轨测量该翼型风洞上下壁附近控制面的静压分布,并利用快速富里叶变换法计算马赫数及迎角修正量。由 TAWX 风洞与西德 DFVLR TWB 风洞实验结果的比较可以看出,当迎角为零时,两者结果吻合较好,说明无堵塞干扰开闭比的确定基本上是正确的,经过快速富里叶变换法进行马赫数及迎角修正后的 TAWX 有升力的实验结果也与 TWB 结果接近。     

可控环量帆翼在船舶上应用的研究

本文试验研究了一种可控环量帆翼,利用壁面切向喷流来移动帆翼圓尾缘分离点位置,可获得比普通帆翼更高的推力系数。文中介绍了展弦比为1的三维可控环量帆翼的试验研究。试验表明,这种可控环量帆翼在较小的喷流动量系数下,即可获得较大的升力增益。在喷流动量系数 C_μ=0.1时,零攻角升力系数已达0.9,在有攻角的情况下,升力系数最大可达2.2。同时,由于帆翼尾部壁面团向喷流的 Coanda 效应,这种可控环量帆翼的阻力亦较大。在喷流动量系数 C_μ=0.1时,零攻角阻力系数为0.3。文章对这种可控环量帆翼在船舶上的应用进行了讨论,并对其性能的进一步改进作了分析和探讨。