复杂动态环境下无人飞行器动态避障近似最优轨迹规划

针对复杂动态环境下无人飞行器的动态障碍规避问题，基于合理假设建立了无人飞行器和动态障碍的运动学模型，并综合考虑无人飞行器飞行过程中的终端约束、控制输入约束、安全避障约束等，以能量最少为性能指标构建动态避障问题数学描述。之后，针对终端约束和控制输入约束，依据优化模型预测静态规划算法(OMPSP)生成初始轨迹；针对动态避障问题的不等式约束，引入松弛变量并结合滑模变结构控制方法设计松弛变量动力学，实现对一个、多个或同时多个动态障碍的安全规避；最后，依据有限时间微分动态规划(RHDDP)算法进行轨迹优化，获得满足上述各种约束并能规避动态障碍的近似最优轨迹。     

Topology optimization in lightweight design of a 3D-printed flapping-wing micro aerial vehicle

Topology optimization is an effective method to obtain a lightweight structure that meets the requirements of structural strength. Whether the optimization results meet the actual needs mainly depends on the accuracy of the material properties and the boundary conditions, especially for a tiny Flapping-wing Micro Aerial Vehicle (FMAV) transmission system manufactured by 3D printing. In this paper, experimental and numerical computation efforts were undertaken to gain a reliable topology optimization method for the bottom of the transmission system. First, the constitutive behavior of the ultraviolet (UV) curable resin used in fabrication was evaluated. Second, a numerical computation model describing further verified via experiments. Topology optimization modeling considering nonlinear factors, e.g. contact, friction and collision, was presented, and the optimization results were verified by both dynamic simulation and experiments. Finally, detailed discussions on different load cases and constraints were presented to clarify their effect on the optimization. Our methods and results presented in this paper may shed light on the lightweight design of a FMAV.     

异构无人系统协同作战关键技术综述

针对异构无人系统的规模、异构性强弱，对异构无人系统进行了分类，引入了异构无人系统协同作战班组的概念以及应用设想，并通过城市环境中异构无人系统协同作战问题为牵引，提出了异构无人系统协同作战面临的挑战与解决思路，在此基础之上，从异构无人系统协同控制架构、协同任务规划、智能交互、目标感知、环境感知等主要方面对异构无人系统协同作战的关键技术进行了分析，最后对异构无人系统协同作战目前的研究进展与挑战进行了总结。     

基于商空间理论的模糊控制在航空相机中的应用

针对航空相机快速返回定位问题,应用商空间理论提出了一种快速无超调定位模糊控制算法。将位置偏差量模糊化．并根据模糊等价关系合并正规峰集,从而得到了不同粒度下的控制规则．系统通过不断改变粒度,采用粗拉度粗调,细粒度细调的方法,实现快速无超调定位。在模拟相机平台上采用3个粒度层,通过模糊规则调整模糊输出和PID控制器的积分时间实现最速控制、模糊控制和PID控制在不同粒度下的转换．实验结果表明此算法具有定位快、稳定精度高以及无超调等优点．     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

一种低RCS无人飞行器外形的气动特性实验研究

根据气动布局的基本原理,结合低RCS要求,设计了一种鸭式布局、带边条的翼身融合无人飞行器外形,实验结果表明,该外形不仅具有低RCS特征,而且具有良好的气动特性,升阻比达到8左右。     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。     

再入制导和弹道跟踪误差分析

新一代可重复使用运载器对再入制导提出了更高地要求。目前的空间运输系统证明基于阻力加速度的制导方法是行之有效的。其基本概念是跟踪基准阻力加速度包线，在飞行过程中可根据需要更新这个包线。跟踪适当的阻力加速度包线保证了飞行器可以飞行准确的距离达到目标，同时满足弹道约束。在横向上，我们可采用类似于美国航天飞机的倾斜反转逻辑或航向角跟踪技术。本文推导出了基于反馈线性化的控制算法，并将其应用于可重复使用运载器纵向和横向的制导。最后，我们分析了阻力加速度跟踪的误差。     

无人机模拟训练系统中的实时飞行仿真

为了降低无人机的试飞成本,提高操纵手的技能,设计了一种模拟训练系统。介绍了该模拟训练系统的特点和构成,着重对系统中实时飞行仿真的各模块设计方法进行了研究。在DOS操作系统中用C语言实现飞行仿真软件,并讨论了软件实现中的模态切换等关键问题。通过飞行剖面仿真实验,证明该仿真系统可靠性高、实时性好。