Estimating inter-system biases for tightly combined Galileo/BDS/GPS RTK

The overlapping carrier frequencies L1/E1, L5/E5a and B2/E5b from GPS/Galileo/BDS allow inter-system double-differencing of observations, which shows a clear advantage over differencing of the observations of each constellation independently. However, the inter-system biases destroy the integer nature of the inter-system double-differencing ambiguities. Two methods of direct rounding and parameter estimation are used to determine the ISB value. By analyzing data collected from Curtin University from 2015 to 2018, the phase and code inter-system bias (ISB) are related to the receiver type, firmware version and the selected overlapping frequency. Upgrade of receiver firmware version results in changes of ISB values. For example, the upgrade of Javad firmware in Dec, 15, 2017 causes the difference of 0.5 cycles ISB between BDS GEO and non-GEO satellites. By comparing the three dynamic models which include white noise process, random walk process, and random constant in the parameter estimation method, the ISB determined by the random constant model is consistent with the value obtained by the direct rounding method. After the calibration of ISBs, the performances of tightly combined positioning are assessed. The success rate of ambiguity resolution and accuracy of positioning for the tight combination (TC) are significantly improved in comparison with that for the loose combination (LC) over short baselines. For L5/E5a, on which only few satellites can be observed, the maximum increase in success rates of ambiguity resolution can reach 31.7%, i.e., from 54.9% of LC to larger than 86.6% of TC, and the positioning accuracies can even be increased by 0.13 m, i.e., from 0.208 of LC to 0.074 m of TC in East direction for the mix-receiver TRIMBLE NETR9-SEPT POLARX4 in 2018.     

差分卫星定位技术及其在武器系统中的应用

差分卫星定位系统可以极大地提高卫星定位的精度,但也有使用、维护复杂等缺点。针对差分卫星定位的特性,首先阐述了卫星差分定位的基本原理,分析了卫星定位误差源,并介绍了差分定位系统对各种误差的修正情况,然后介绍了差分定位系统的分类、方法及发展,其中详细介绍了在武器系统领域中应用较广的局域差分系统的各种方法及其优缺点;最后,对差分系统的实际应用进行了阐述,并重点探讨了其在进攻性武器及防御性武器领域实现应用的可行性。     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

K8、JK8机翼接头与检验量规协调准确度的提高

分析了 K8、 JL8机翼接头孔精加加后与检验量规位置协调的条件，介绍了为提高它们之间协调准确度所采取的措施及其效果。     

美国对其GPS采取的国策

从兼顾美国经济利益和国家安全目标、GPS及其增强系统的管理、国家安全及对外政策四个方面综合考察了美国对其GPS所采取的最新国策。     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

圆柱齿轮齿廓偏差及螺旋线偏差精度控制研究

在齿轮加工过程中,热处理变形是影响齿轮精度的主要原因之一.通过分析CA457桥从动圆柱齿轮在渗碳淬火热处理中齿廓偏差、螺旋线偏差的变化数据,得出齿廓偏差、螺旋线偏差的变形规律.根据渗碳淬火后基圆半径和螺旋角的变形均呈增大趋势,修改加工刀具的设计齿廓和齿轮的设计螺旋线,降低热处理前产品的工艺精度,保证了热处理后产品的合格率.在创造良好经济效益的同时也为同类产品提供了设计依据.     

一种小样本和小失效数系统可靠性分析方法

根据小样本和小失效数系统的特点，以及可靠性分布函数和参数估计的不确定性和模糊性，提出了一种可靠性分析方法。采用指数分布族，通过分析最少和最大失效数两种最极端状态，确定中间状态的备选点，运用最小平方差原理进行逐个筛选，并给出了算法流程。分析结果表明，计算值与实际观测值较为吻合。该方法可使系统可靠性的估计精度有较大提高。