一种高动态低信噪比卫星导航信号捕获方法

为提升高动态低信噪比环境下卫星导航信号的捕获性能,提出了一种基于分数阶傅里叶变换(FrFT)及部分匹配滤波(PMF)的捕获方法。在该方法中,接收机首先利用PMF对接收信号做分段相干积分,随后借助快速傅里叶变换(FFT)对分段积分结果做离散快速FrFT,最后通过检测FrFT输出的峰值完成信号的捕获。由于具有多普勒频率变化率的卫星导航信号在FrFT后呈现能量聚焦特性,所提方法能够显著提高信号的长时间相干积分增益。同时对所提算法的捕获概率、平均捕获时间以及算法复杂度等性能指标进行了理论分析及计算机仿真验证。仿真表明,与传统的PMF-FFT方法相比,所提方法能够通过延长相干积分时间的方式有效提升高动态低信噪比卫星导航信号的捕获概率、降低捕获时间。     

平直地面对一类圆极化波的等效反射系数

本文研究了入射波电场为任意线极化时,平直地面反射波中左旋圆极化分量和右旋圆极化分量的数学描述,引入了地面对这类波的等效反射系数的概念,并给予了物理解释,讨论了应用的有关问题。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

一类统一的零(低)相关序列构造方法

基于自相关理想序列和正交矩阵建立一类统一的具有零(低)相关区的扩频序列构造方法,并对其相关特性进行分析和证明。该类方法可通过序列和矩阵的任意选取,统一地构造二元、三元、多相、复数的ZCZ(LCZ)序列集,且构造简单、形式统一,通用性更好,适用于准同步CDMA(QS-CDMA)系统。     

翼面隐身结构在飞航导弹模型上的数值仿真研究

隐身结构是指由蒙皮和多种内部材料组成的、能满足承载要求、并具有明显降低雷达散射截面的结构。目的是探讨在常规布局飞航导弹上采用隐身结构的效果。以某常规布局飞航导弹模型为背景，设计出两种翼面隐身结构方案，并将这两种翼面隐身结构方案分别应用于飞航导弹模型的弹翼。应用时域有限差分法（FD-TD法）建立了飞航导弹模型电磁散射数值模型。通过数值仿真手段，计算、比较和分析了含有翼面隐身结构的飞航导弹和普通全金属飞航导弹的RCS值。数值仿真结果显示，与普通飞航导弹相比，这两种翼面隐身结构在许多方位上均能有效降低飞航导弹的RCS值。     

最优库存管理

本文分析了如何使库存费用最低的问题,并提出了最佳方案.     

低频靶标法测量CCD相机调制传递函数的仿真

基于用高频靶标法测试调制传递函数(MTF)时不能准确地体现出CCD器件的平均采样的情况。该文探讨用低频靶标法测试MTF,介绍它的原理;通过数字仿真CCD的光学镜头的模糊和采样平均过程,分析不同频率靶标的MTF测试结果,并分析相位造成的影响。     

战术固体火箭发动机按费用优化设计

论述了按费用设计的概念和方法，在５种战术固体火箭发动机制造成本数据统计分析的基础上，以部件重量作为模型参数，建立了适合于战术固体发动机的喷管，装药和壳体成本模型，根据这些成本模型，对某地－空战术导弹火箭发动机以冲费和为目标函数进行按费用优化设计，所得结果通过与实际发动机试车结果及制造成本比较，表明以作为参数的成本模型合理，按费用优化设计技术可行，经济上合理。     

卫星成本预测的蒙特卡洛优化模型研究

传统的卫星成本预测模型预测结果单一，未考虑相应的不确定性因素。对此，提出了基于蒙特卡洛方法的卫星成本预测模型。该模型综合考虑了卫星成本技术的不确定性并给出了预测值的区间范围和概率分布。为了降低应用该模型所产生的误差，提出了最优分层抽样的方法，并通过划分分层区间提高了抽样的效率。最后，将收集到的相关数据代人该模型，其结果精度大约提高了10％左右。可见，使用优化的蒙特卡洛方法进行卫星成本预测具有较好的精确度。