Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

Measurement of middle atmospheric ozone density profile by rocket-borne radiometer onboard KSR-II

KSR-II, a two-stage sounding rocket of KARI was launched successfully at the Korean Peninsula on June 11, 1998. The apogee of the rocket was 137 km. For the ozone measurement, 8-channel UV and visible radiometers were onboard the rocket. The rocket measured an in situ stratospheric and mesospheric ozone density profile over Korea during its ascending phase using the radiometer and transmitted the data to ground station in real time. The maximum ozone density occurs near 25 km. Retrieved profile has a random error (1σ) of approximately 15% for altitude below 20km, 7% between 20-50 km and 10% greater than 50 km. The retrieved data were compared with Dobson spectrophotometer, ozonesonde, and HALOE onboard the UARS. Our results are in reasonable agreements with others.     

Design of a modern pitch pointing control system

The development of a pitch pointing control system for an advanced high performance fighter aircraft using eigenstructure assignment and command generator tracking schemes is presented. A desired eigenstructure is first chosen to achieve a desired decoupling (i.e., pitch attitude and flight path angle), and to obtain a desired damping and rise time. The command generator tracker is next used to ensure zero steady-state error-to-step commands. The stability robustness to the parameter variations of the closed-loop system is evaluated in the sense of the conditioning of the achieved eigenstructure by using singular value analysis technique. The analysis and synthesis techniques for the pitch pointing control system are illustrated by applying the techniques to F-15 aircraft as a part of the NASA/USAF program named ACTIVE (Advanced Controls for integrated Vehicles)     

Comment on “A new approach to robust fault detection andidentification”

In the paper by M. Saif and Y. Guan (see ibid., vol. 3, no 29, p. 685-695), a necessary and sufficient condition is given for the existence of an asymptotically stable observer in the case of p=m. The objective of this note is to point out a critical mistake in the main theorem of the paper     

Patterns of carbon monoxide in the middle atmosphere and effects of solar variability

We determine the spatial-time patterns of zonally averaged carbon monoxide (CO) in the middle atmosphere by applying Principle Component Analysis to the CO data obtained from the Microwave Limb Sounder (MLS) measurements on the Aura satellite in 2004–2012. The first two principal components characterize more than 90% of the CO variability. Both principal components are localized in the low thermosphere near the mesopause. The first principal component is asymmetric relative to the poles. It has opposite signs in the Northern and Southern Hemisphere at mid to high latitudes and strongly oscillates with an annual periodicity. The second principal component has the same sign in both hemispheres and oscillates mainly with a semi-annual frequency. Both principal components are modulated by the 11-year solar cycle and display short-term variations. To test possible correlations of these variations with the short term solar ultraviolet (UV) variability we use the simultaneous measurements of the UV solar radiance from the Solar-Stellar Irradiance Comparison Experiment (SOLSTICE) on the Solar Radiation and Climate Experiment (SORCE) satellite to investigate the correlation between CO in the middle atmosphere and solar UV in 2004–2012. Using a wavelet coherence technique a weak, intermittent 27-day signal is detected in high-frequency parts of the CO principal components.     

Osmoadaptive strategies of the archaeon Halococcus hamelinensis isolated from a hypersaline stromatolite environment

Biogenic stromatolites are sources of significant information on the evolution of microbial life. Despite their evolutionary significance, little is known about the mechanisms of osmoadaptation by microorganisms that comprise living stromatolites thriving in hypersaline environments. Osmoadaptive strategies for Halococcus hamelinensis, a novel halophilic archaeon recently isolated from living stromatolites in the hypersaline reaches of Shark Bay, were thus a particular interest in this study. To investigate the possibility of "salt-in-cytoplasm"-associated osmoadaptation for this archaeon, flame photometry studies were performed. From the results, it was evident that this halophilic archaeon did not accumulate intracellular K(+) ions when cells were exposed to either osmotic shock or conditions with gradual increments in salinity. These results were further supported by polymerase chain reaction (PCR) analyses where there was no evidence for the existence of homologous genes to an ATP-driven, high-affinity potassium uptake system in Halococcus hamelinensis. To identify an alternative salt adaptation mechanism associated with accumulation of compatible solutes for this archaeon, (1)H nuclear magnetic resonance (NMR) spectroscopy experiments were carried out. Results indicate that glycine betaine, trehalose, and glutamate are solutes likely to be involved in osmoregulation in this archeaon. Subsequent (1)H NMR analysis of cell extracts from this microorganism grown under various NaCl concentrations revealed that intracellular levels of glycine betaine increased with increasing concentrations of NaCl. This behavior of increasing glycine betaine concentration with increasing external NaCl is consistent with its identity as an osmolyte. In contrast, intracellular levels of trehalose were decreased in high concentrations of NaCl. This provides evidence that compatible solute accumulation appears to be the preferential salt regulation mechanism for this haloarchaeon, in contrast to the salt-in-cytoplasm strategy employed by many other halophilic archaea.     

Linear time-varying eigenstructure assignment with flight control application

This work is concerned with the assignment of a desired PD-eigenstructure for linear time-varying systems. Despite its well-known limitations, gain scheduling control appeared to be a focus of the research efforts. Scheduling of frozen-time, frozen-state controllers for fast time-varying dynamics is known to be mathematically fallacious, and practically hazardous. Therefore, recent research efforts are being directed towards applying time-varying controllers. In this paper we: 1) introduce a differential algebraic eigenvalue theory for linear time-varying systems; and 2) propose a PD-eigenstructure assignment scheme via a differential Sylvester equation and a command generator tracker (CGT) for linear time-varying systems. The PD-eigenstructure assignment is utilized as a regulator. A feedforward gain for tracking control is computed by using the command generator tracker. The whole design procedures of the proposed PD-eigenstructure assignment scheme are systematic in nature. The scheme could be used to determine the stability of linear time-varying systems easily as well as to provide a new horizon of designing controllers for the linear time-varying systems. A missile flight control application is presented to validate the proposed schemes.     

Aerodynamic design optimization of helicopter rotor blades including airfoil shape for hover performance

This study proposes a process to obtain an optimal helicopter rotor blade shape for aerodynamic performance in hover flight. A new geometry representation algorithm which uses the class function/shape function transformation (CST) is employed to generate airfoil coordinates. With this approach, airfoil shape is considered in terms of design variables. The optimization process is constructed by integrating several programs developed by author. The design variables include twist, taper ratio, point of taper initiation, blade root chord, and coefficients of the airfoil distribution function. Aerodynamic constraints consist of limits on power available in hover and forward flight. The trim condition must be attainable. This paper considers rotor blade configuration for the hover flight condition only, so that the required power in hover is chosen as the objective function of the optimization problem. Sensitivity analysis of each design variable shows that airfoil shape has an important role in rotor performance. The optimum rotor blade reduces the required hover power by 7.4% and increases the figure of merit by 6.5%, which is a good improvement for rotor blade design.     

Sensitivity analyses of satellite propulsion components with their thermal modelling

Performing the sensitivity analyses of the contact conduction and the position of thermostat on the basis of the thermal model established, the study of thermal design is accomplished for the preparation of possible mechanical interface change of the satellite propulsion system depending on the satellite system design. A relatively simple thermal model is taken into consideration for the convenience of the analysis. A variety of the spacecraft bus voltages and the contact resistances are examined as well as the position of thermostat on propulsion components. As a consequence, even though the mechanical interface condition is changed on the same module, the successful thermal design could be achieved if we design the heater to have sufficiently large power with reference to the heritage value of contact resistance. Besides the reasonable performance on the thermal control is assured with the thermostat location errors, if the uncertainty in the position of thermostat is not quite large when assembling tank module.