发汗冷却喷管在火箭发动机上的应用

较系统地介绍了发汗冷却的机理和发汗冷却研究的发展历程，说明了发汗喷管不同研究阶段的典型结构，并重点阐述了可望很快应用于工程上的发汗喷管结构，同时列出了发汗喷管计算中关键技术－热量交换的有关数学模型和各参数的取值。指出了近期需要开展的工作。     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.     

旋转环形截面弯管内流场结构及换热特性

环形截面弯管围绕其中心轴旋转时，同时受到科氏力和离心力作用，弯管内的对流换热更为复杂，本文对旋转环形截面弯管内的流动特性和温度分布进行了数值分析。结果表明：旋转环形截面弯管内的换热特性主要由Dn数，F数（科氏力和离心力之比),Pr数，和δ值（内外径之比）决定；文中给出并分析了在不同δ下流场结构与摩擦系数比随F数的变化特性和随Dn数的变化规律，并给出了在不同δ和Pr数情况下，温度场和管道Nu数随F数和Dn数的变化规律。     

绕任意轴旋转的管道流动和换热特性研究

当管道绕任意轴旋转时，管道内的轴向速度分布发生改变，截面上产生二次流动，管道的对流换热特性将引起变化。本文对绕任意轴旋转的管道流动与换热进行了数值模拟，研究结果表明：绕任意轴旋转管道内的对流换热特性主要由Re（雷诺数），Ro(Rossby数），Pr（普朗特数）数，和α（旋转轴与管道轴线的夹角）四个参数决定。文中分析了在不同情况下流场结构与摩擦系数比以及温度场与管道Nu数比率随Re数和Ro数的变化规律，为工程实际应用提供了理论依据。     

发动机模糊控制器应用的实验研究

 研究了模糊控制器在航空发动机控制中的实验应用。给出了实验方案及有关部件的数学描述;提出了用模糊控制开关设计法设计模糊控制器的思路及相应的数学描述;对发动机转速数字控制系统进行了实验研究。结果表明 :模糊控制器设计简便,具有良好的非线性校正作用,控制性能指标优良。     

悬停状态下旋翼旋转噪声的分析

对直升机悬停时旋翼的旋转噪声进行了初步研究，分别用单极子和偶极子声源描述旋翼的厚度噪声和载荷噪声，并根据悬停状态下旋翼气动载荷的特点，用傅立叶级数表示旋翼桨盘上各点的气动力和法向气流速度，然后代入单极子和偶极子声源声辐射公式中，求出旋翼桨盘外某观察点的声压值。最后结合一算例，分析悬停状态下旋翼旋转噪声的辐射特性和不同的展向载荷分布模型对计算结果的响应。     

三维攻击角度约束部分制导控制一体化设计

针对侧滑转弯(STT)导弹带有攻击角度约束的机动目标拦截问题，提出一种基于自适应终端滑模动态面控制的三维部分制导控制一体化(PIGC)设计方法。首先，建立了针对机动目标拦截的侧滑转弯导弹三维部分制导控制一体化设计模型，且不需要导弹速度微分体轴系分量信息。然后，使用终端滑模控制理论构建误差向量与虚拟控制量，达成精确拦截与攻击角度约束的控制目的；引入有限时间非线性收敛扩张状态观测器(ESO)来在线估计系统不确定性；设计自适应算子与自适应更新律对观测器的估计误差进行补偿，以提高方法的鲁棒性。最后，三维空间拦截仿真校验了方法在提高拦截精度与增强角度约束收敛性能的有效性。     

The Lunar Reconnaissance Orbiter Miniature Radio Frequency (Mini-RF) Technology Demonstration

The Miniature Radio Frequency (Mini-RF) system is manifested on the Lunar Reconnaissance Orbiter (LRO) as a technology demonstration and an extended mission science instrument. Mini-RF represents a significant step forward in spaceborne RF technology and architecture. It combines synthetic aperture radar (SAR) at two wavelengths (S-band and X-band) and two resolutions (150 m and 30 m) with interferometric and communications functionality in one lightweight (16 kg) package. Previous radar observations (Earth-based, and one bistatic data set from Clementine) of the permanently shadowed regions of the lunar poles seem to indicate areas of high circular polarization ratio (CPR) consistent with volume scattering from volatile deposits (e.g. water ice) buried at shallow (0.1–1 m) depth, but only at unfavorable viewing geometries, and with inconclusive results. The LRO Mini-RF utilizes new wideband hybrid polarization architecture to measure the Stokes parameters of the reflected signal. These data will help to differentiate “true” volumetric ice reflections from “false” returns due to angular surface regolith. Additional lunar science investigations (e.g. pyroclastic deposit characterization) will also be attempted during the LRO extended mission. LRO’s lunar operations will be contemporaneous with India’s Chandrayaan-1, which carries the Forerunner Mini-SAR (S-band wavelength and 150-m resolution), and bistatic radar (S-Band) measurements may be possible. On orbit calibration, procedures for LRO Mini-RF have been validated using Chandrayaan 1 and ground-based facilities (Arecibo and Greenbank Radio Observatories).     

FAST FEATURE RANKING AND ITS APPLICATION TO FACE RECOGNITION

A fast feature ranking algorithm for classification in the presence of high dimensionahty and small sample size is proposed. The basic idea is that the important features force the data points of the same class to maintain their intrinsic neighbor relations, whereas neighboring points of different classes are no longer to stick to one an- other. Applying this assumption, an optimization problem weighting each feature is derived. The algorithm does not involve the dense matrix eigen-decomposition which can be computationally expensive in time. Extensive exper- iments are conducted to validate the significance of selected features using the Yale, Extended YaleB and PIE data- sets. The thorough evaluation shows that, using one-nearest neighbor classifier, the recognition rates using 100-- 500 leading features selected by the algorithm distinctively outperform those with features selected by the baseline feature selection algorithms, while using support vector machine features selected by the algorithm show less prominent improvement. Moreover, the experiments demonstrate that the proposed algorithm is particularly effi- cient for multi-class face recognition problem.