THE CLUSTER ION SPECTROMETRY (CIS) EXPERIMENT

The Cluster Ion Spectrometry (CIS) experiment is a comprehensive ionic plasma spectrometry package on-board the four Cluster spacecraft capable of obtaining full three-dimensional ion distributions with good time resolution (one spacecraft spin) with mass per charge composition determination. The requirements to cover the scientific objectives cannot be met with a single instrument. The CIS package therefore consists of two different instruments, a Hot Ion Analyser (HIA) and a time-of-flight ion COmposition and DIstribution Function analyser (CODIF), plus a sophisticated dual-processor-based instrument-control and Data-Processing System (DPS), which permits extensive on-board data-processing. Both analysers use symmetric optics resulting in continuous, uniform, and well-characterised phase space coverage. CODIF measures the distributions of the major ions (H⁺, He⁺, He⁺⁺, and O⁺) with energies from ~0 to 40 keV/e with medium (22.5°) angular resolution and two different sensitivities. HIA does not offer mass resolution but, also having two different sensitivities, increases the dynamic range, and has an angular resolution capability (5.6° × 5.6°) adequate for ion-beam and solar-wind measurements.     

Potential starter/generator technologies for future aerospaceapplications

This paper presents a search and comparative review of the literature available on variable speed constant frequency (VSCF) technologies. In particular, most of the progress made in the past ten years, using power electronics and electric machines for VSCF systems, is reported. Two VSCF systems, based on induction and switched reluctance machine technologies are presented. The research on the singly- and doubly-fed induction machines has focused on VSCF for wind power generation, whereas that on switched reluctance machines has been directly studied as a VSCF technology in aircraft systems. Results obtained so far favor the switched reluctance machine over the induction machine. Based on the foregoing comparative review, it is recommended that the induction machine be fully investigated as a VSCF drive for aircraft systems. The findings should then be compared with the counterpart SRM system. Issues of comparison may include fault tolerance and redundancy, power density, torque requirements, overload ratings, temperature range and cooling, efficiency and stability over expected operating speed range     

Motor drive technologies for the Power-By-Wire (PBW) program:options, trends and tradeoffs. II. Power electronic converters anddevices

For pt. I see ibid., vol. 10, pp. 37-41 (1995). This is the second of two papers on the motor drive technology options for the Power-By-Wire (PBW). The organization of this paper is based on the four components of the electrical actuator (EA) system and the options available to suit the PBW program as given in the PBW studies. The first paper discussed the options available for the motor and the controller parts of a drive. This paper discusses the power electronic converter and device options. The power converter options are divided into hard-, snubbered- and soft-switching converters. The power device options are the MOSFET, the Insulated Gate Transistor (IGT), the gate turn-off thyristor (GTO) and the MOS Controlled Thyristor (MCT)     

Motor drive technologies for the power-by-wire (PBW) program:options, trends and tradeoffs. I. Motors and controllers

The Power-By-Wire (PEW) program involves the replacement of hydraulic and pneumatic systems currently used in aircraft with an all-electric secondary power system. One of the largest loads of the all-electric secondary power system will be the motor loads which include pumps, compressors and Electrical Actuators (EAs). Issues of improved reliability, reduced maintenance and efficiency, among other advantages, are the motivation for replacing the existing aircraft actuators with electrical actuators. The EA system contains the motor, the power electronic converters, the actuator and the control system, including the sensors. This paper and a companion paper give a comparative literature review in motor drive technologies, with a focus on the trends and tradeoffs involved in the selection of a particular motor drive technology. The reported research comprises the induction motor (IM), the brushless dc motor (BLDCM) and the switched reluctance motor (SRM) drive technologies. Each of the three drives has the potential for application in the PEW program. Many issues remain to be investigated and compared between the three motor drives, using actual mechanical loads expected in the PBW program     

Potential starter/generator technology for future aerospaceapplication

This paper presents a search and comparative review of the literature available on variable speed constant frequency (VSCF) technologies. In particular, most of the progress made in the past ten years, using power electronics and electric machines for VSCF systems is reported. Two VSCF systems, based on induction and switched reluctance machine technologies, are presented. The research on the singly- and doubly-fed induction machines has focused on VSCF for wind power generation; whereas, that on switched reluctance machines has been directly studied as a VSCF technology in aircraft system. Results obtained so far favor the switched reluctance machine over the induction machine. Based on the foregoing comparative review, it is recommended that the induction machine be fully investigated as a VSCF drive in aircraft system. The findings should then be compared with the counterpart SRM system. Issues of comparison may include fault tolerance and redundancy, power density, torque requirements, overload ratings, temperature range and cooling, efficiency and stability over expected operating speed range