Performance of a two-layer LEO satellite communication network

A novel two-layer low Earth orbiting (LEO) satellite network is proposed. Comparing with a single layer global network, not only the system performance is improved but also the number of satellites can be reduced. The main ideas include (1) to raise the altitude of the original global network, and (2) to add several satellites at lower altitude to form a regional network to serve calls from the areas of heavy traffic. In order to fully utilize the benefits of the two-layer network, additional functions such as adjustable beam and dynamic channel management are added. Call blocking rate is derived. Numerical examples are provided to demonstrate several interesting phenomena.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

Lunar Exploration Neutron Detector for the NASA Lunar Reconnaissance Orbiter

The design of the Lunar Exploration Neutron Detector (LEND) experiment is presented, which was optimized to address several of the primary measurement requirements of NASA’s Lunar Reconnaissance Orbiter (LRO): high spatial resolution hydrogen mapping of the Moon’s upper-most surface, identification of putative deposits of appreciable near-surface water ice in the Moon’s polar cold traps, and characterization of the human-relevant space radiation environment in lunar orbit. A comprehensive program of LEND instrument physical calibrations is discussed and the baseline scenario of LEND observations from the primary LRO lunar orbit is presented. LEND data products will be useful for determining the next stages of the emerging global lunar exploration program, and they will facilitate the study of the physics of hydrogen implantation and diffusion in the regolith, test the presence of water ice deposits in lunar cold polar traps, and investigate the role of neutrons within the radiation environment of the shallow lunar surface.     

两种Fe—Ni—Cr基高温合金氢渗透行为的研究

本工作采用气相渗透技术,测定了210～430℃温度范围内两种Fe-Ni-Cr基高温合金GH35A和GH761的氢渗透率和扩散系数,试图了解合金的微观组织结构变化对氢渗透行为的影响。结果表明:在实验温度范围内,氢在两种合金中的渗透行为均服从Arrhenius关系式;氢渗透率和扩散系数对GH35A的组织结构变化是不敏感的,但在GH761中时效处理后的φ和D值均略低于合金的固溶状态值。     

Using electrical impedance spectroscopy to detect water in planetary regoliths

We present data in examination of the utility of electrical impedance spectroscopy measurements for in situ surveys to determine the water content, distribution, and phase in unconsolidated planetary regolith. We conducted calibration experiments under conditions relevant to Mars: the concentration of electrolytes in solution was varied up to 1 M to simulate the effects of unsaturated dissolved minerals and brines. We also varied the water content of heterogeneous water/sand mixtures, made with these electrolytic solutions from 0.01 wt% to 10 wt%. Tests were performed at temperatures from +25 degrees C to -65 degrees C. Conductivity and dielectric permittivity calculated from the impedance measurements indicate an expected dependence on electrolyte concentration and relative independence from electrolyte type for both liquid water and water ice. Conductivity and calculated dielectric relaxation times for these aqueous solutions agree with existing data in the literature. The relative permittivity for heterogeneous water/sand mixtures is dominated by polarization effects for the electrode configuration used. However, the characteristic orientational relaxation of ice is still visible. The conductivity retains the strong dependence on electrolyte concentration, and the permittivity is still not affected by electrolyte type. A "universal" curve between conductivity and water content establishes detectability limits of <0.01 wt% and approximately 0.3 wt% for water/sand mixtures containing liquid water and ice, respectively.     

Lunar Reconnaissance Orbiter Overview: The Instrument Suite and Mission

NASA’s Lunar Precursor Robotic Program (LPRP), formulated in response to the President’s Vision for Space Exploration, will execute a series of robotic missions that will pave the way for eventual permanent human presence on the Moon. The Lunar Reconnaissance Orbiter (LRO) is first in this series of LPRP missions, and plans to launch in October of 2008 for at least one year of operation. LRO will employ six individual instruments to produce accurate maps and high-resolution images of future landing sites, to assess potential lunar resources, and to characterize the radiation environment. LRO will also test the feasibility of one advanced technology demonstration package. The LRO payload includes: Lunar Orbiter Laser Altimeter (LOLA) which will determine the global topography of the lunar surface at high resolution, measure landing site slopes, surface roughness, and search for possible polar surface ice in shadowed regions, Lunar Reconnaissance Orbiter Camera (LROC) which will acquire targeted narrow angle images of the lunar surface capable of resolving meter-scale features to support landing site selection, as well as wide-angle images to characterize polar illumination conditions and to identify potential resources, Lunar Exploration Neutron Detector (LEND) which will map the flux of neutrons from the lunar surface to search for evidence of water ice, and will provide space radiation environment measurements that may be useful for future human exploration, Diviner Lunar Radiometer Experiment (DLRE) which will chart the temperature of the entire lunar surface at approximately 300 meter horizontal resolution to identify cold-traps and potential ice deposits, Lyman-Alpha Mapping Project (LAMP) which will map the entire lunar surface in the far ultraviolet. LAMP will search for surface ice and frost in the polar regions and provide images of permanently shadowed regions illuminated only by starlight. Cosmic Ray Telescope for the Effects of Radiation (CRaTER), which will investigate the effect of galactic cosmic rays on tissue-equivalent plastics as a constraint on models of biological response to background space radiation. The technology demonstration is an advanced radar (mini-RF) that will demonstrate X- and S-band radar imaging and interferometry using light weight synthetic aperture radar. This paper will give an introduction to each of these instruments and an overview of their objectives.     

Application of time-variable process noise in terrestrial reference frames determined from VLBI data

In recent years, Kalman filtering has emerged as a suitable technique to determine terrestrial reference frames (TRFs), a prime example being JTRF2014. The time series approach allows variations of station coordinates that are neither reduced by observational corrections nor considered in the functional model to be taken into account. These variations are primarily due to non-tidal geophysical loading effects that are not reduced according to the current IERS Conventions (2010). It is standard practice that the process noise models applied in Kalman filter TRF solutions are derived from time series of loading displacements and account for station dependent differences. So far, it has been assumed that the parameters of these process noise models are constant over time. However, due to the presence of seasonal and irregular variations, this assumption does not truly reflect reality. In this study, we derive a station coordinate process noise model allowing for such temporal variations. This process noise model and one that is a parameterized version of the former are applied in the computation of TRF solutions based on very long baseline interferometry data. In comparison with a solution based on a constant process noise model, we find that the station coordinates are affected at the millimeter level.     

电液主动控制挤压油膜阻尼器的理论分析

针对旋转机械采用传统的动压轴承构成的挤压油膜阻尼器存在的问题,提出了一种由压电晶体-电液主动控制的动静压混合轴承构成的电液挤压油膜阻尼器(HSFD).对于这种电液挤压油膜阻尼器, 经典的半油膜(π油膜)假设不再成立. 为了求解它的压力分布, 提出了一种适用于含有动静压混合作用时Reynolds方程的求解方法. 在此基础上, 对采用这种电液挤压油膜阻尼器的转子系统进行了理论分析, 从而为实现主动控制奠定了基础.      

Lunar Reconnaissance Orbiter (LRO): Observations for Lunar Exploration and Science

The Lunar Reconnaissance Orbiter (LRO) was implemented to facilitate scientific and engineering-driven mapping of the lunar surface at new spatial scales and with new remote sensing methods, identify safe landing sites, search for in situ resources, and measure the space radiation environment. After its successful launch on June 18, 2009, the LRO spacecraft and instruments were activated and calibrated in an eccentric polar lunar orbit until September 15, when LRO was moved to a circular polar orbit with a mean altitude of 50 km. LRO will operate for at least one year to support the goals of NASA’s Exploration Systems Mission Directorate (ESMD), and for at least two years of extended operations for additional lunar science measurements supported by NASA’s Science Mission Directorate (SMD). LRO carries six instruments with associated science and exploration investigations, and a telecommunications/radar technology demonstration. The LRO instruments are: Cosmic Ray Telescope for the Effects of Radiation (CRaTER), Diviner Lunar Radiometer Experiment (DLRE), Lyman-Alpha Mapping Project (LAMP), Lunar Exploration Neutron Detector (LEND), Lunar Orbiter Laser Altimeter (LOLA), and Lunar Reconnaissance Orbiter Camera (LROC). The technology demonstration is a compact, dual-frequency, hybrid polarity synthetic aperture radar instrument (Mini-RF). LRO observations also support the Lunar Crater Observation and Sensing Satellite (LCROSS), the lunar impact mission that was co-manifested with LRO on the Atlas V (401) launch vehicle. This paper describes the LRO objectives and measurements that support exploration of the Moon and that address the science objectives outlined by the National Academy of Science’s report on the Scientific Context for Exploration of the Moon (SCEM). We also describe data accessibility by the science and exploration community.     

Optimization of the Energy-Storage Inductors for DC-to-DC Converters

Three sets of design graphs and equations are developed to facilitate design of the energy-storage inductors for dc-to-dc converters. Using the design graphs, a quick estimate of the inductor minimum weight, the transistor peak current, and the inductor power loss can be obtained. Tradeoff studies can be conveniently conducted using these graphs. The effects of duty cycle controllers, constant frequency and constant tON, on the optimal selection of the energystorage inductors are assessed.