Scientific ballooning services

The services available for scientific ballooning are described with special emphasis on the facilities of the NCAR Balloon Flight Station at Palestine, Texas. The preparations for a typical launching, the operations during the launch, the flight and the recovery are described for illustrative purposes. Considerations on the future development of scientific ballooning are given; technological problems for extended flights are considered to be less serious than the political problems.     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

An Algorithm for Designing Burst Waveforms with Quantized Transmitter Weights

An algorithm is described which finds optimum transmitter and receiver weights to maximize clutter suppression in a predetermined clutter region when using burst waveforms. It is assumed that the transmitter weights can only take on values from a finite set. This optimization problem is solved using a branch and bound algorithm. An example is given which shows the improvement in clutter suppression when this new design procedure is used as compared to a simpler nonoptimal procedure.     

Effect of variable thermal properties of the solid phase on composite solid propellant combustion

Effects of variable thermal properties (specific heat and thermal conductivity) of the solid phase on the combustion of composite solid propellants are studied analytically. Both steady and unsteady burning are considered. It is shown that the effects of variable thermal properties are small and can be accounted for by choosing proper average values of specific heat and thermal conductivity.     

System identification of dynamic closed-loop control of total peripheral resistance by arterial and cardiopulmonary baroreceptors.

Prolonged exposure to microgravity in space flight missions (days) impairs the mechanisms responsible for defense of arterial blood pressure (ABP) and cardiac output (CO) against orthostatic stress in the post-flight period. The mechanisms responsible for the observed orthostatic intolerance are not yet completely understood. Additionally, effective counter measures to attenuate this pathophysiological response are not available. The aim of this study was to investigate the ability of our proposed system identification method to predict closed-loop dynamic changes in TPR induced by changes in mean arterial pressure (MAP) and right atrial pressure (RAP). For this purpose we designed and employed a novel experimental animal model for the examination of arterial and cardiopulmonary baroreceptors in the dynamic closed-loop control of total peripheral resistance (TPR), and applied system identification to the analysis of beat-to-beat fluctuations in the measured signals. Grant numbers: NAG5-4989.     

Initial results from COMPTEL onboard GRO

COMPTEL is the first imaging telescope to explore the MeV gamma-ray range (0.7 to 30 MeV). At present, it is performing a complete sky survey. In later phases of the mission selected celestial objects will be studied in more detail. The data from the first year of the mission have demonstrated that COMPTEL performs very well. First sky maps of the inner part of the Galaxy clearly identify the plane as a bright MeV-source (probably due to discrete sources as well as diffuse radiation). The Crab and Vela pulsar lightcurves have been measured with unprecedented accuracy. The quasars 3C273 and 3C279 have been seen for the first time at MeV energies. Both quasars show a break in their energy spectra in the COMPTEL energy range. The 1.8 MeV line from radioactive ²⁶A1 has been detected from the central region of the Galaxy and a first sky map of the inner part of the Galaxy has been obtained in the light of this line. Upper limits to gamma-ray line emission at 847 keV and 1.238 MeV from SN 1991T have been derived. Upper limits to the interstellar gamma-ray emissivity have been determined at MeV-energies. Several cosmic gamma-ray bursts within the field-of-view have been located with an accuracy of about 1°. On 1991 June 9, 11 and 15, COMPTEL observed gamma-ray emission (continuum and line) from three solar flares. Also neutrons were detected from the June 9 and June 15 flares.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

Analysis of a Class of Nonlinear Sampled-Data Systems with a Gaussian Input Signal

The problem treated here is the analysis of a class of nonlinear sampled-data systems with a Gaussian input signal. The nonlinear element is a symmetrical limiter (memoryless device) that feeds the linear element. Preceding the limiter is a sampler and zero-order hold unit for data reconstruction. The analysis is predicated on finding an equivalent gain for the nonlinear element such that the mean-square error is a minimum. The nonlinearity is thus replaced by a linear component and the system is then analyzed by conventional techniques. It is also shown that for appropriate sampling rates the sampled-data system is equivalent to a continuous system due to the action of the sampler-hold combination. All calculations pertaining to the limiter input signal require the use of a transfer function that is interior to the feedback loop. However, in developing this transfer function, the overall system is considered so that the system output may be evaluated after the value of equivalent gain has been found.     

Artificial gravity: a possible countermeasure for post-flight orthostatic intolerance

Four payload crewmembers were exposed to sustained linear acceleration in a centrifuge during the Neurolab (STS-90) flight. In contrast to previous studies, otolith–ocular reflexes were preserved during and after flight. This raised the possibility that artificial gravity may have acted as a countermeasure to the deconditioning of otolith–ocular reflexes. None of the astronauts who were centrifuged had orthostatic intolerance when tested with head-up passive tilt after flight. Thus, centrifugation may also have helped maintain post-flight hemodynamic responses to orthostasis by preserving the gain of the otolith–sympathetic reflex. A comparison with two fellow Neurolab orbiter crewmembers not exposed to artificial gravity provided some support for this hypothesis. One of the two had hemodynamic changes in response to post-flight tilt similar to orthostatically intolerant subjects from previous missions. More data is necessary to evaluate this hypothesis, but if it were proven correct, in-flight short-radius centrifugation may help counteract orthostatic intolerance after space flight.