密集编队气动耦合效应分析

简要介绍密集编队飞行时长机旋涡对僚机产生的气动耦合效应，以比奥特－萨瓦尔特定律为基础，初步分析由上洗及侧洗引起的升力、阻力和侧力变化，导出了编队稳定性导数的计算公式，计算及应用举例表明：模型化编队飞行时的气动耦合效应是有实际应用价值的。     

多孔材料挤压过程数值模拟

本文利用QFORM通用有限元软件对多孔材料挤压过程进行了数值模拟，分析了平均应力与相对密度之间的对应关系，以及初始相对密度对致密速度和挤压力的影响，可以为多孔材料的工艺设计、模具设计和制品性能控制提供理论依据。     

Urca processes in dense matter and neutron star cooling

Urca-processes were introduced into astrophysics by Gamow and Schoenberg in 1941. Neutrino cooling resulting from urca-processes plays an important role at the latest stages of evolution of massive stars. Recent work on neutrino emissivity of dense matter shows that neutrino cooling via urca-processes could determine the thermal evolution of young neutron stars and depends dramatically on the composition of the neutron star core. In particular, if a neutron star contains a central core in which the direct urca-process is operative, the cooling timescale shortens by many orders of magnitude.     

喷射沉积过程中显微组织的形成机制

通过对沉积还纵剖面的组织分析，发现沉积坯在进缘、上下表面及中心部位的显微组织明显不同。边缘及上下表面区试样的退火试验研究表明，细小的枝晶碎块在高温退火过程中发生凝共和粗化，并导致近球状晶粒组织的形成。试验确定其生长服从：D2-D02=6.37×1020e(-70036.1/T)·τ，晶界迁移激活能Qg=582KJ／mol。并依赖于两种机制：（1）在喷射沉积过程中无强烈变形枝晶的均匀化；（2）变形及断裂枝晶的生长和粗化。     

Petri网及其在FMS建模中的应用

本简要介绍了Petri网的原理，及其在FMS建模中的应用。     

数控展成电解加工的阴极结构及流场研究

介绍了应用数控展成电解在整体叶轮毛坯上开槽时的流场特点,讨论了阴极结构对加工间隙内流场的影响规律,并相应对阴极的结构设计提出了一些建议。     

Observation of fundamental magnetoplasma emissions excited in magnetosphere by modulated electron beams

There were several cases when modulated electron beam had been injected from APEX satellite into an otherwise unmodified ionospheric plasma. The beams were formed from 2 μs pulses repeated at a rate of 40kHz. Injections took place in the altitude range 400–1100km over Europe. The onboard receiver connected to the dipole antenna swept the frequency interval 1–10 MHz in 1 sec. Due to a relatively narrow receiver bandwidth (15 kHz), moderate frequency step (50 kHz), slow changes of f_n and f_c (local electron plasma and gyro frequencies) fine structure of excited emissions was detected. In many cases, a very prominent doublet could be convincingly identified as a (f_n,f_u=sqrt(f_n^*f_n+f_c^*f_c)) band, with f_n practically equal to the local plasma frequency in the unperturbed ionosphere. Determination of plasma frequency is of prime importance in analysis of complex structures composed from various harmonics f_n,f_c,f_u. Complexity is manifested as coalescing of various harmonics with maxima shifted from nominal frequencies or splitting them into components due to mixing of local and propagation effects. Despite the existence of strong emissions on frequencies characteristic for the unperturbed ionosphere, very strong broadcasting transmissions are frequently cut off, even when the beam is directed upward. Most typical spectra are discussed.     

中远距空空导弹导引头系统仿真及误差分析

针对中远距空空作战,建立了中远距空空导弹的飞行仿真模型,给出了导弹攻击目标的全过程,并给出了攻击结果,即脱靶量和目标杀伤概率的计算方法。在分析末制导阶段导弹雷达工作过程的基础上,分析了导引头误差对测量目标信息及导弹飞行过程和攻击结果的影响。最后,使用Visual Studio 2010和OpenGL进行了空空导弹的全过程飞行仿真,验证了模型的正确性和有效性。     

WCB钢阀体的铸造工艺模拟及改进

利用三维绘图软件Pro/Engineer生成WCB钢阀体的三维实体模型,运用铸造模拟软件Z-Cast对阀体进行流场和温度场的数值模拟,预测缩孔、缩松等缺陷产生的部位,并分析形成原因。通过Z-Cast软件对冒口、冷铁尺寸进行改进,优化工艺。模拟计算结果表明:改进工艺实现了顺序凝固,消除了缩孔、缩松缺陷,保证了铸件质量。     

桨尖喷气驱动系统的实验与数值模拟研究

桨尖喷气驱动是一种很有应用前景的动力驱动类型,针对桨尖喷气驱动系统进行设计研究。通过建立压气机式桨尖喷气驱动系统的实验平台,改变入口条件,测量得到喷气管道内部的流动参数以及桨尖喷口的静推力,进而计算此驱动系统的输出功率,对整个驱动系统的性能进行试验分析,然后采用CFD数值模拟方法对试验的各个流动状态进行仿真计算。结果表明:CFD数值计算结果与试验值吻合的很好,随着入口总压的提高,推力及功率变大,同时说明了CFD数值方法的可靠性,也为CFD数值模拟技术在喷气驱动系统的效率以及动力来源的选择与适配研究提供了参考。