航天器运输包装箱仿真验证平台技术研究

针对数量有限的物理跑车试验无法满足减振与保温性能测试需求的问题，提出一套航天器运输包装箱动力学与热学仿真验证方法，包括：建立适用于包装箱系统的刚柔耦合多体动力学系统，通过结合线路条件测试生成的动力学系统外部激励，实现减振性能虚拟跑车测试；建立基于计算流体力学的包装箱热学模型，通过模拟自然对流和空调控制，实现包装箱保温性能虚拟跑车测试；基于C/S架构和导航式流程设计思想，建立航天器运输包装箱仿真验证平台，通过实际案例证明该平台仿真结果与实际跑车测试数据具有较高的一致性。     

高背压等离子点火器及其液体燃料点火特性实验研究

航天应用的液体火箭发动机及燃烧型加热器燃烧室室压高、燃料流量大、温度低、有重复启动需求，实现安全可靠点火的难度较大。针对这些需求，研究了一种采用高背压设计的电弧等离子体点火器。实验研究了Ar，N₂气体工质在高进气压力下的伏安特性，发现N₂在宽压力范围内适用于点火。发射光谱分析表明，在高达数MPa的进气压力下，Ar，N₂等离子体射流电子密度符合局部热力学平衡判据（LTE判据），点火能量集中。N₂等离子体整体温度低于Ar，但阳极喷口附近温度高于Ar，N₂等离子体射流火焰长，卷吸沿程空气造成射流平均温度偏低，但有助于低温液体推进剂的蒸发混合和强化点火。等离子体射流引起了臭氧和氮氧化物的形成，具有促进点火和化学反应的作用。背压提高引起电源输出电压升高，提高供气压力和电流，有助于点火器在高背压环境中稳定电压。燃烧型空气加热器燃烧室的点火实验发现，采用N₂等离子体喷注面中心点火，可以在短时间内完成酒精-空气和酒精-液氧-空气的点火，最高燃烧室室压接近5MPa时，点火器仍能稳定工作，多次使用电极烧蚀不明显，在液体火箭发动机的重复可靠点火方面具有很好的应用前景。     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

电连接器接点焊接工艺研究

针对航天产品电连接器接点焊点与引线断裂失效问题,分析了焊接过程中助焊剂、焊料、焊接工具和防护套等对接点焊接质量的影响。结合实践经验,提出相关工作参数和材料的选取原则,确定了生产中焊接技术的质量控制点。     

Almost instant time inference for hybrid partially dynamic Bayesian networks

A Bayesian network (BN) is a compact representation for probabilistic models and inference. They have been used successfully for many military and civilian applications. It is well known that, in general, the inference algorithms to compute the exact a posterior probability of a target node given observed evidence are either computationally infeasible for dense networks or impossible for general hybrid networks. In those cases, one either computes the approximate results using stochastic simulation methods or approximates the model using discretization or a Gaussian mixture model before applying an exact inference algorithm. This paper combines the concept of simulation and model approximation to propose an efficient algorithm for those cases. The main contribution here is a unified treatment of arbitrary (nonlinear non-Gaussian) hybrid (discrete and continuous) BN inference having both computation and accuracy scalability. The key idea is to precompile the high-dimensional hybrid distribution using a hypercube representation and apply it for both static and dynamic BN inference. Since the inference process essentially becomes a combination of table look-up and some simple operations, the method is shown to be extremely efficient. It can also he scaled to achieve any desirable accuracy given sufficient preprocessing time and memory for the cases where exact inference is not possible     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

风量与风机的安全运行

本文阐明了离心式通风机在通风除尘(或排毒净化)系统中的作用,以及离心式通风机产生风压.风量的工作工程,从而引出风机的性能参数风量L、风压P、功率N、效率η等.文章突出地论述了风量对风压、功率、效率的影响;详尽地分析了离心式通风机的性能曲线,特别是N—L曲线;根据性能曲线分析得知,风量L为零(L=0)时,风消耗的功率N最小.从而得出结论;系统中的离心式通风机必须是在关闭状态下启动,以确保通风机的安全运行.     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

掠海飞行导弹击水概率的仿真研究

本文对掠海导弹的击水概率问题进行了研究,提出了用均匀设计、Monte—Carlo法和逐步回归法建立击水概率预报公式的仿真方法,并结合某型号的反舰导弹进行计算,得到了满意的结果。本文还利用表观频率和表观频谱的概念,建立起飞航导弹的背景干扰——海浪和阵风的数学模型,并用波叠加法进行了数字仿真。     

开放式飞行任务规划方法

本文给出了一种基于分布式黑板结构的开放式飞行任务规划方法，简要叙述了飞行器飞行任务规划的概念和其独特要求，并对飞行任务规划的数据预处理、知识表达、规划方法作了深入的探讨。最后介绍了分布式黑板的结构和运行方式。