Quantitative Assessments of the Martian Hydrosphere

In this paper, we review current estimates of the global water inventory of Mars, potential loss mechanisms, the thermophysical characteristics of the different reservoirs that water may be currently stored in, and assess how the planet’s hydrosphere and cryosphere evolved with time. First, we summarize the water inventory quantified from geological analyses of surface features related to both liquid water erosion, and ice-related landscapes. They indicate that, throughout most of Martian geologic history (and possibly continuing through to the present day), water was present to substantial depths, with a total inventory ranging from several 100 to as much as 1000 m Global Equivalent Layer (GEL). We then review the most recent estimates of water content based on subsurface detection by orbital and landed instruments, including deep penetrating radars such as SHARAD and MARSIS. We show that the total amount of water measured so far is about 30 m GEL, although a far larger amount of water may be stored below the sounding depths of currently operational instruments. Finally, a global picture of the current state of the subsurface water reservoirs and their evolution is discussed.     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

Oxygen line mapping of SN 1006 with Suzaku

SN 1006 is one of the supernova remnants (SNRs) with relatively low-temperature electrons, considering the young age of just 1000 years. We carried out SN 1006 mapping observations with the X-ray Imaging Spectrometers (XIS) and the Hard X-ray Detector (HXD) onboard Suzaku, the fifth Japanese X-ray satellite. Thanks to the excellent spectral resolution of XIS in the soft X-ray band, H-like and He-like oxygen emission lines were clearly detected, and we could make a map of the line intensity, and as well as a flux and the photon index of nonthermal component. We found that these parameters have spatial dependences from region to region in the SNR; the north region is bright in nonthermal, while dim in thermal; the east region is bright in both nonthermal and thermal; the inner region shows dim nonthermal and bright thermal emission. The photon index is the smallest in the north region.     

Power system design of ESMO

The European Student Moon Orbiter (ESMO) spacecraft is a student-built mini satellite being designed for a mission to the Moon. Designing and launching mini satellites are becoming a current trend in the space sector since they provide an economic way to perform innovative scientific experiments and in-flight demonstration of novel space technologies. The generation, storage, control, and distribution of the electrical power in a mini satellite represents unique challenges to the power engineer since the mass and volume restrictions are very stringent. Regardless of these problems, every subsystem and payload equipment must be operated within their specified voltage band whenever they required to be turned on. This paper presents the preliminary design of a lightweight, compact, and reliable power system for ESMO that can generate 720 W. Some of the key components of the EPS include ultra triple-junction (UTJ) GaAs solar cells controlled by maximum power point trackers, and high efficiency Li-ion secondary batteries recharged in parallel.     

CASH 2021: commercial access and space habitation

Issues about commercialization of space have been a growing concern in the past decade for the space community. This paper focuses on the work from a team of 51 students attending the Summer Session Program of the International Space University in Bremen, Germany. CASH 2021 (Commercial Access and Space Habitation) documents a plan that identifies commercial opportunities for space utilization that will extend human presence in space, and will chart the way forward for the next 20 years. The group selected four commercial sectors that show the most promise for the future: tourism, entertainment, space system service, assembly and debris removal, and research and development/production. The content of this document presents the results of their research. Historical activities in each of the commercial sectors are reviewed along with the current market situation. To provide a coherent background for future commercialization possibilities a scenario has been developed. This scenario includes a postulated upon ideal future and includes social, political and economic factors that may affect the space industry over the timeline of the study. The study also presents a roadmap, within the limited optimistic scenario developed, for the successful commercialization of space leading to future human presence in space. A broad range of commercially viable opportunities, not only within the current limits of the International Space Station, but also among the many new developments that are expected by 2021 are discussed.     

Transient Response of an Asymmetric Cylindrical Antenna

The time-domain transient response of a thin dipole antenna is discussed in terms of element lengths and the surge impedances of the transmission line and element terminals. Theory and measurements show that, unlike symmetric configurations, asymmetry in the element lengths, together with appropriate mismatch of the transmission line, produces radiation proportional to the first time derivative of the signal voltage, and replica reception proportional to the incoming field.     

Random tropospheric effects in command guidance by multilaterationand interferometry

Statistical models are developed for the random spatial variations in refractivity in the troposphere, and are used to derive spatial correlation functions for the errors in range measurement and interferometer angle measurement. These are then used to analyze the relative errors between two tracked targets, for application to command-guided intercept problems. It is shown that multilateration, using range measurements, yields much smaller relative errors than does the interferometer approach     

An annunciator architecture for the year 2000

Exciting new safeguards and security technologies are on the horizon, and some are even on the shelves today. Self-testing sensors, smart sensors, and intelligent alarm analyzers are all designed to provide useful information to the operator. However, today's current annunciator systems were not designed to accommodate these new technologies. New display technologies are also changing the look and feel of the annunciator of the future. Annunciator technology needs to “catch up” to these other security technologies. This paper presents the concept for a new, object-oriented approach to annunciator architecture design. The new architecture could accommodate simple, switch-closure devices as well as information-rich sensors and intelligent analyzers. In addition the architecture could allow other leading-edge interfaces to be easily integrated into the annunciator system. These technologies will reduce operator workload and aid the operator in making informed security decisions