基于新型丝状电极等离子体激励器的前体涡控制

本文首次将新型丝状暴露电极DBD等离子激励器应用于大迎角下细长体非对称涡控制。丝状暴露电极的材料的选择对DBD推力以及推力效率至关重要,通过地面精细推力测量对丝状暴露电极等离子体激励器进行了优化,结果表明,本文研究材料中采用钨丝作为暴露电极,其推力效率最优;且随着电极直径从d=0.3 mm减小到d=0.08 mm,DBD推力效率显著提升。基于优化后的DBD激励器,将其应用于前体非对称涡控制:未施加等离子体控制时,压力测量以及PIV结果均表明细长体背风区流场为明显的非对称涡结构;在等离子体激励下,该非对称涡结构可变为对称甚至反向非对称,且非稳态激励控制能力明显优于稳态激励。研究发现,大迎角下细长体非对称涡控制与背风区原始涡系结构有关,其中包含对称涡系和非对称涡系。本文研究为大迎角下细长体非对称涡控制提供了一种新思路,同时也为丝状暴露电极DBD等离子体激励器的应用提供参考。     

四相横向磁通永磁电机的三电平滞环电流控制

以新型四相横向磁通永磁电机为研究对象,利用MATLAB/Simulink软件平台以及Simpower System工具箱,对闭环控制系统进行了研究。在传统双闭环调速控制基础上,为滞环电流控制环引入零电平,将滞环分为上滞环和下滞环。综合考虑开关频率与电流THD确定合适的滞环环宽,并根据偏差电流值与滞环环宽比较值得到逆变器控制信号。通过仿真得到各种工况下的电机运行数据,说明该控制方法能够对四相横向磁通永磁电机进行有效控制。     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

改善横向波纹隔热屏综合冷却效率的发散冷却结构优化

为改善横向波纹隔热屏综合冷却效果，采用三维数值模拟和基于支持向量机的代理优化模型，在给定的单位面积冷却空气流量下对发散冷却结构参数进行了优化研究。设计变量选取为气膜孔直径、气膜孔排布的展向间距和流向间距，以面积平均综合冷却效率作为目标函数，通过遗传算法搜索获得了设计变量区间内的优化设计点。在隔热屏单位表面积冷却空气流量G_f = 2.647 kg/（m²?s）的工况下，优化后的d、P和S分别为0.8、4和5 mm。研究结果表明，优化的隔热屏冷却结构应具有较小的气膜孔直径d和展向间距P，以及适中的流向间距S。相对于参考结构，优化后的发散冷却结构能够改善沿流向的气膜覆盖，缩减发散冷却起始段局部高温段，起到增强隔热屏发散冷却综合冷却效率的作用。     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

翼身融合布局低速验证机前缘缝翼设计

翼身融合布局是未来民机最有可能实现的非常规布局形式，其气动布局方案的验证通常采用缩比模型飞行试验的方式进行。以某翼身融合布局低速验证机为研究对象，以数值计算方法为基础，分析了其在飞行试验中存在的纵向和横向不稳定现象，提出了改善的方案——增加前缘缝翼。对此验证机进行前缘缝翼的气动布局设计、典型翼型的二维前缘缝翼设计和机翼三维前缘缝翼的气动设计，利用数值计算方法对设计结果进行纵向和横向分析。结果显示，所设计的前缘缝翼可以明显地增大验证机的失速迎角，改善其纵向力矩特性和横向特性。     

超声横波斜探头K值对缺陷定位的影响

本文重点分析了影响横波斜探头K值测量的因素之一的测试用横孔埋深,对实测K值的影响,通过实验,得出了两个修订方程,可以提高横波斜探头在探伤时对缺陷的定位精度。     

细长旋成体大迎角绕流的背涡结构与压力脉动特性

在亚临界流动范围内,通过尖拱细长旋成体在无侧滑状态下的脉动压力测量,对大迎角下细长旋成体非对称背涡结构沿轴向的压力脉动特征进行了研究分析,揭示了压力的脉动幅度与频率沿旋成体轴向的变化规律及其与背涡结构之间的对应关系,并对压力脉动特征沿轴变化的原因进行了初步探讨.     

大迎角细长旋成体绕流结构演变过程实验研究

 通过烟流显示和测压实验, 系统地观察和分析了尖拱头细长旋成体绕流结构随迎角的演变过程。实验发现在不同迎角下, 不仅细长旋成体绕流结构形态不同, 而且不同流态结构的演变过程所含迎角范围较小,几乎在几度迎角内就可完成。     

自由涡数值计算的参数影响分析

介绍了自由涡方法中多个参数的影响,包括桨叶离散段数、有弯度翼型的涡网格密度、尾迹的长度.从桨叶根部到桨尖采用分区离散,内段区域离散稀疏,桨尖区域离散细密,根部区域的离散密度对计算结果影响不大,桨尖区域的离散密度对计算结果影响较大;采用涡网格模拟有弯度的翼型,涡网格的密度对计算结果有较大影响,但密度过大对于计算精度提高影响不大.悬停和小速度前飞状态,取9圈自由涡尾迹就能够得到较好的计算结果,爬升和大速度前飞状态下,取7圈自由涡就能够得到足够的计算精度.在上述参数中,自由涡圈数对计算时间的影响最大.