Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

半球谐振陀螺全角模式控制技术研究

介绍了半球谐振陀螺全角模式的工作机理及其技术特点。对全角模式下振型的控制进行了理论分析,采用乘法相干解调对陀螺振型参数进行提取,并采用参数激励方法对谐振子进行驱动和控制。设计了数字电路进行实验,结果表明该全角模式控制技术实现了半球谐振陀螺的角速率积分功能,能够0°～360°全角度敏感输出,测得的角速度测量值超过300(°)/s,角度测量线性度优于10~(-4),与传统的力平衡模式相比,半球谐振陀螺的动态特性得到大幅提升。     

一种地理围栏内无人机航迹跟踪方法

针对UTM体制中无人机在地理围栏内的飞行监视问题,提出一种约束状态相关模态转换混合估计算法(CSDTHE)。采用随机线性混杂系统模型对无人机运动状态进行建模,利用CV、CT和CA三种模态描述无人机的飞行状态,以构建地理围栏内无人机运行的通用模态转换模型框架。利用飞行模态改变点(FMCP)定义相关模态转换参数,设计模态转换条件,生成模态转换概率矩阵,从而建立与状态相关的模态转换模型。运用约束卡尔曼滤波(CKF)方法对直线阶段和转弯阶段的无人机运动速度分别施加等式约束,并通过仿真实验验证了CSDTHE算法对无人机跟踪的有效性。     

超低轨道卫星应用离子电推进技术方案

低地球轨道大气环境对诸如科学探测和对地观测卫星的阻尼作用十分明显，而且阻尼随太阳和地磁活动以及昼夜、季节交替变化范围宽。为了保证卫星轨道精度或飞行状态满足任务要求，需要利用推进系统对卫星受到的阻尼进行实时或间歇式补偿以实现轨道或飞行状态的保持。针对轨道高度220~268km的无拖曳飞行和轨道维持应用，基于卫星轨道阻尼变化和有效载荷指标要求分析，研究确定了离子电推进技术指标、推力调节方案、系统组成、推力控制方案和在轨应用策略，并对推力调节方案进行了试验验证。结果表明，与无拖曳飞行卫星任务匹配的离子电推进指标为推力调节范围1~20mN，推力分辨率优于12μN，与对地观测卫星轨道维持任务匹配的指标为推力调节范围1～25mN，推力分辨率100μN。研究提出的针对超低轨道卫星应用需求的高精度推力连续调节离子电推进技术方案，具有工程任务针对性和参考价值。     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点，传统的姿态控制器难以适用于该种复杂干扰并存的情况，文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器，并将角速度回路的滑模变量量化为直接力指令，以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰，从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定，分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明，该方法跟踪速度快，动态过程平稳，具有较强的干扰抑制能力，具有很强的鲁棒性。     

超精密微牛级微波离子推进技术及其在卫星超精度控制中的应用研究

空间技术的快速发展使得利用空间卫星的编队飞行构建大型空间星座成为可能，在引力波探测、射电望远镜编队、星座组网等任务方面具有重要作用。超精度控制是实现卫星高精度编队飞行的关键技术。推进系统是实现卫星编队长期高度稳定飞行的保证，从而实现内部科学装置的正确运行。不同于常规的推进系统，卫星精密编队超精度控制对推进系统的推力可调范围、分辨率、响应时间、推力的一致性等有着极高的要求。根据卫星精密编队任务需求，对微牛级推进系统的功能及技术要求进行了分析，提出了基于M2微波离子推力器的卫星超精度控制推进系统。阐述了M2超精密微牛级推进系统的关键技术和研究进展，为后续M2推力器在无拖曳控制方面的应用奠定了基础。     

Two-stream instability generation in the lunar ionosphere

The Two-stream Instability (TSI) generation is studied analytically in the lunar ionosphere. The TSI is a tiny perturbation in the electron plasma density, due to which an electric field grows with time and this growth is facilitated by the electron plasma in the background. In lunar ionosphere, the TSI comes into existence when the solar wind interacts unhindered with the tenuous lunar electron plasma in the surface bound exosphere. In this study, the conditions which allow the TSI to form and the subsequent instability growth with time i.e. the growth factor, is estimated. Initially, the threshold condition for the TSI to take place is determined. Thereafter, the solar wind and lunar plasma parameter contribution to trigger TSI is investigated along with the effect of these parameters in the evolution of TSI. The plasma TSI evolution with the passage of time is also depicted in phase space diagram with Particle-In-Cell simulations.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

多梁复合结构的动力学建模及全局解析振型分析

多梁复合结构广泛用于工程领域，其动力学特性对相关装备的工作状况有着重要影响，建立准确适用的动力学模型对后续的动力学响应参数影响规律研究有决定性作用。针对工程中常见的多梁复合结构，给出了位移场的一般表达式，利用哈密顿原理得出多梁复合结构的运动控制方程和边界条件，对其全局解析振型进行理论计算，给出了计算多梁复合结构数值振型的一般过程，基于数值分析和实验分析以L型梁和Z型梁为例利用频率相对误差、振型定性比较和MAC定量分析说明了全局解析振型的求解验证方法，利用伽辽金方法和全局解析振型给出了截断原系统得到离散系统运动方程的一般形式。提出的多梁复合结构的建模方法和全局解析振型求解验证方法，对工程中此类结构动力学响应的参数影响规律研究有重要意义。