涡轮基组合循环发动机分布式控制系统通信网络混合拓扑结构优化方法

涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。     

基于SSI通讯的吸附式水平测量仪设计

为满足飞行器发射平台不水平倾角的高精度测量以及与外部工控系统SSI实时通讯需求，设计了一款基于SSI串行通讯的高精度吸附式水平测量仪。本文详细阐述了水平测量仪的基本原理、机械结构组成、硬件电路原理以及SSI通讯接口的方案设计。经试验验证，该产品具有测量精度高，测角精度误差优于10″（3σ），工作性能稳定性好等特点，可广泛应用于发射平台、三轴转台、大理石平板等使用基准面的倾角测量领域，具有较高的工程应用价值。     

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

星载激光通信终端在轨机动对温度影响

对激光通信终端在轨瞬态温度变化开展了仿真，以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化，建立终端的轨道热分析模型，准确模拟在轨机动，根据典型机动模式、外热流和涂层退化等因素设计了计算工况，得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明：不同机动模式下的温度变化存在差异，最大可达23.0℃，采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度，甚至不能部分替代二维转动热分析或热试验；光学天线和反射镜的温度控制是制约终端工作的瓶颈，为终端设计合适的避光机动策略，可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。     

前向数据接入方式对导航星座网络通信性能的影响分析

对采用时分多址轮询建链体制的导航星座星间链路网络，为了指导星间链路网络地面前向数据接入的应用，分析了不同地面前向数据接入方式的星-星-地联合数据交互机制及其对网络通信性能的影响，并结合应用代价给出了综合评价和使用建议。以前向数据最快路径接入方式和固定节点接入方式为代表，分析了星间链路网络与地面间星 星 地联合数据交互机制的特点，明确了两种方式下星间链路网络拓扑路由规划策略的制定原则。通过构建Walker 24/3/1导航星座星间链路网络数据处理模型及典型星地运行场景，对两种地面前向数据接入方式仿真分析了星间链路通信容量和传输时延等网络通信性能，比较分析了通信容量及数据拥塞规律，得出前向数据最快路径接入方式相比于固定节点接入方式在通信性能上有较明显优势的结论。最后，综合给出了两种星 星 地联合数据交互机制的应用性评价,同时给出了在通信容量较低且通信时延要求不高、但可靠性要求较高的应用条件下，可适度采用固定节点接入方式的建议。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

多状态空间信息网络拓扑生成优化算法

依据空间信息网络（SIN）高动态性的特点，并考虑卫星工作的多状态特性，兼顾星间通信时延和拓扑抗毁性的要求，研究了多状态下空间信息网络拓扑生成及动态优化的问题。根据卫星星座的周期性，建立了一种卫星网络的拓扑周期表。综合卫星的可视性和连接度等约束条件，以网络平均和最大时延作为通信性能的优化目标，建立拓扑的多目标优化模型。提出一种改进的多目标模拟退火（IMOSA）算法，求解全局时延最优的卫星拓扑，并在考虑多状态情况下对链路进行优化，以满足网络高动态性。最后基于具有66颗低轨（LEO）的铱星星座进行仿真，研究表明：针对多状态条件下的铱星星座，该算法最大化减小了通信时延，得到抗毁性良好的拓扑结构，通信性能较之原有静态拓扑明显得到改善。     

扑旋翼飞行器气动特性分析及机翼拓扑优化设计

建立微型扑旋翼飞行器运动学模型,基于面元法研究低雷诺数下非定常场中扑旋翼飞行器的气动特性,得到机翼气动特性和一个工作周期内的最大气动载荷。建立扑旋翼飞行器机翼有限元模型,基于变密度法和独立连续映射法(Independent continuous mapping,ICM)对机翼进行静力学和动力学拓扑优化设计,通过改变机翼拓扑结构优化机翼模态频率,得到同时满足结构静力学和动力学要求的扑旋翼飞行器机翼拓扑结构。本文为扑旋翼飞行器机翼结构优化设计提供了基本思路和研究基础。