Application of a modified generalized sail model on a solar sail with wrinkles

In this paper, we present an analysis of effect of wrinkles on the solar sail performance. We describe different analytical, semi-analytical and numerical approaches to the calculation of general large-scale curvature of a solar sail as well as parameters of so-called wrinkled domains, and introduce the impact of such wrinkles on the thrust and torque of the solar sail. Finally, we present a model of an optically-orthotropic surface for such non-ideal sail, providing a connection with the Generalized Sail Model, and other solar sail thrust models.     

厚覆冰导线升力突变机理及数值模拟研究

针对新月形厚覆冰导线的升力系数在风攻角15°附近存在突变的问题,分别采用基于k-ωSST湍流模型的雷诺时均法和大涡模拟(LES)的数值方法对新月形厚覆冰导线在风攻角10°~20°范围进行了模拟。通过对比两种数值方法计算得到的覆冰导线气动力系数、流场结构和表面风压,发现LES方法能够更好地捕捉新月形覆冰导线表面的小尺度涡结构,得到的覆冰导线气动力参数计算结果与风洞试验数据高度吻合;而k-ωSST湍流模型难以模拟壁面上小尺度涡,捕捉不到升力系数的突变。根据覆冰导线不同壁面区域的压力分布,发现上侧壁面处的涡结构影响整体流场,并在下侧壁面曲率、来流夹角和壁面切线方向共同作用下导致升力系数突变。LES的气动力参数模拟结果可为覆冰导线防舞提供参考。     

基于深度神经网络的客机总体设计参数敏感性分析

飞机总体主要设计参数敏感性分析揭示了总体主要设计参数对飞机特性指标的影响，有助于总体设计方案的决策。针对宽体客机总体主要设计参数敏感性问题，根据其总体主要设计参数和特性指标的特点，以及多学科间的耦合关系，建立了深度神经网络模型。该深度神经网络模型以客机总体主要设计参数为输入，对特性指标进行预测。在深度神经网络模型中，设置了多个输入层、多个输出层以及多个分块的隐藏层，从而模拟客机总体主要设计参数对特性指标的影响以及不同特性指标之间的相互作用。测试结果表明，与传统代理模型相比，深度神经网络模型对客机特性指标的预测精度更高，多参数适应性更好。利用该深度神经网络模型对客机总体主要设计参数进行敏感性分析。分析结果表明，机翼1/4弦线后掠角在30°~31.5°时，有利于减少最大起飞重量和起飞平衡场长；发动机海平面最大静推力和机翼面积对客机直接使用成本、最大起飞重量等特性指标的影响最为显著。     

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.     

基于虚拟安全域的多级安全访问控制

虚拟化技术作为云计算的核心技术,相对于传统技术具有节约开销、易于管理、灵活制定等优势,成为业界应用的热点技术。文章研究了传统的BLP多级安全模型,并改进了该模型应用于虚拟化系统访问控制,结合虚拟安全域的概念,设计实现了虚拟化系统访问控制模型,主要结合分级分域原则对虚拟机之间的通信控制和虚拟机对虚拟磁盘的访问控制进行约束。     

空间载荷机柜热控设计的仿真研究

空间站主动热控系统的作用是提供和保持航天员、仪器设备和结构部件所要求的温度、湿度和风速等热环境。本文以空间载荷机柜为热控系统的基本单元，建立了以单相流体循环回路为基础、采用液冷结合风冷的冷却方式的载荷机柜数学模型；介绍了模糊增量控制算法的工作原理；提出了采用模糊增量控制算法，以液冷支路进出口温差和风冷支路冷却量占总冷却量的比值为控制目标的反馈控制策略。同时文章采用数值模拟方法研究了控制系统的动态响应效果。仿真结果显示，模糊增量控制算法具有响应迅速、超调量小、无静态误差的特点，控制策略满足有效性、稳定性和高精确度的要求。     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

民用飞机舱门飞行锁机构接触力计算分析

研究飞机飞行锁机构中的接触力对于民用飞机飞行锁机构的设计具有重要意义。首先介绍飞行锁机构的功能和主要设计依据,阐明某民用飞机飞行锁机构的工作原理,并对其传力路径进行分析;然后采用工程算法、多刚体模型和多柔体模型三种计算方法计算飞行锁工作时曲柄与飞行锁摇臂之间的接触力;最后对三种计算方法进行对比,分析不同方法计算得到的接触力力值产生差异的原因。结果表明:多刚体模型计算值与工程算法计算值产生差异的主要原因是机构空行程导致的力臂变化,多柔体模型计算值与多刚体模型计算值产生差异的原因主要是受力过程中的结构变形。     

考虑测试性设计缺陷修正延时的测试性增长模型建模与评价方法

针对现有测试性增长模型忽略了测试性设计缺陷的修正延时过程，进而导致测试性增长模型（TGM）跟踪与预计精度低的问题，提出了一种考虑测试性设计缺陷修正延时的测试性增长模型建模理论与方法。首先分析测试性设计缺陷识别与修正之间的延时机理，得到剩余测试性设计缺陷（TDL）具有先增后减的铃形变化趋势；在此基础上，分别以Gamma、Raleigh和Delay-S 3种曲线拟合剩余测试性设计缺陷（RTDL）变化趋势，研究建立基于以上3种曲线考虑修正延时的测试性增长模型；最后，以某机载稳定跟踪平台测试性增长试验数据验证测试性增长模型拟合、跟踪及预计效能。研究结果表明：基于该测试性增长试验数据，Gamma曲线可以精确地拟合剩余测试性设计缺陷变化规律，测试性增长模型跟踪和预计精度可达到10^-2数量级。