基于双滤波器的高精度目标跟踪估计方法

针对连续推力的合作航天器，采用双重无迹卡尔曼滤波(DUKF)算法估计其状态和加速度。通过状态滤波器和参数滤波器的配合，提升滤波精度，完成运动状态和参数的估计，从而实现合作目标的运动轨迹跟踪。与合作航天器相比，非合作航天器存在大小未知、发生时刻未知的机动，无法获得加速度，且信息获取和运动状态的估计难度大。针对非合作航天器，基于简化的相对运动方程，结合天基平台获得目标的观测信息，采用两个扩展卡尔曼滤波(EKF)及基于半正焦弦的机动检测策略实现多未知脉冲机动的运动状态的估计。仿真结果表明：相比于无迹卡尔曼滤波（UKF），DUKF在对合作航天器的状态和加速度估计方面具有更快的收敛速度和更高的滤波精度；对于存在未知机动的非合作航天器，通过对比验证机动检测策略与滤波器切换策略相结合的方法的有效性，该方法能够检测到多次机动并且减少误判。     

速率模式飞轮姿态控制系统飞轮组合平稳切换方法

对速率模式飞轮姿态控制系统的能控性、稳定性和飞轮组合切换过程进行了研究，揭示了在飞轮组合切换过程中引起卫星姿态抖动的原因，提出了通过对残余角动量进行卸载并将卸载函数同时前馈到系统输入的方法，以保持卫星姿态的稳定度。从理论上证明了可引入残余角动量进行卸载，将卸载函数同时前馈到系统输入，并且不改变原系统的能控性和稳定性。给出了某卫星飞轮切换应用实例，说明了飞轮组合平稳切换方法的有效性。     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

折叠式变体飞行器轨迹优化及控制分析

针对临近空间高超声速飞行器存在的问题，设计了一种折叠翼飞行器，可以通过折叠机翼来适应各种飞行状态，保持最优的气动特性。并针对临近空间滑翔式高超声速的特点，采用高斯伪谱法对固定翼飞行器和折叠翼飞行器的轨迹优化，通过将折叠翼飞行器与传统固定翼飞行器在射程能力、规避热流能力方面进行对比，提出了一种综合目标的轨迹优化思想。设计的折叠翼飞行器相比传统固定翼飞行器性能更加优越，更适合临近空间环境，提高了17.67%的航程，减少了热流率峰值的35.72%，并通过控制系统的设计和仿真加以验证，仿真结果表明变体飞行器机动能力相比固定翼飞行器有了显著的提高。     

航天器姿态预设性能控制方法综述

针对存在不确定惯量矩阵及其它未知不确定性(如执行器故障、航天器结构发生突变等)下的航天器姿态控制问题，综述了预设性能控制及其应用的研究进展。首先阐释了预设性能控制方法的基本内涵及其关键步骤；然后分析总结了现有航天器姿态控制以及预设性能控制研究的基本概况与发展趋势；最后面向未来复杂化、智能化的空间任务对航天器控制系统提出的新需求，提出航天器预设性能控制值得研究的问题和方向。     

轨控大干扰下的系统角动量管理

摘要： 针对利用角动量交换装置系统实现轨控期间姿态维持的情况，研究当轨控推力器存在大力矩扰动时系统角动量管理方法.结合对地运行航天器轨道运动特性，分析轨控干扰力矩的积累角动量变化规律；考虑角动量管理装置系统的角动量存贮容量，基于角动量积累规律提出了一种结合偏置角动量建立与对称分布轨控位置选择的系统角动量管理方法，实现了对称轨控位置积累角动量互相抵消的自平衡效果，极大程度地提高轨控效率且避免系统角动量饱和现象.所提出的方法适用于喷气欠驱动控制系统，方法的有效性通过了数学仿真验证及在轨型号应用.     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

基于产品结构的航天器AIT过程多维数据管理系统

文章为解决航天器AIT过程中数据集成度低、数据应用不佳等问题,从数据模型构建、数据集成等方向出发,分析了AIT过程数据在产品结构、时间周期、阶段型号3个维度的演变过程,构建了多维数据模型,并开发基于产品结构的多维数据管理系统。该系统以产品结构为核心,对AIT过程数据进行重新组织,定义不同系统间、不同维度数据之间的关联关系,实现了AIT过程全数据的结构化整合,在此基础上生成了AIT过程数据包。