Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

基于随机维纳过程的航空发动机性能衰退研究

针对发动机下发间隔预测的问题，研究了发动机性能衰退规律。基于发动机排气温度裕度（EGTM）数据，建立了随机维纳模型，并使用严酷度因子修正模型，表征不同的工作条件对发动机的影响。利用期望最大化（EM）算法结合贝叶斯定理，对模型参数求解，最终得到了基于性能衰退的发动机平均下发间隔。研究结果表明，在严酷度因子为1.2696的使用条件下，某型号航空发动机性能衰退平均下发间隔为8219循环；基于该模型预测的发动机平均下发间隔与厂商建议的下发时间之间的误差仅为1.7%。     

含有任意多个椭圆孔弹性板的应力场计算

本文应用弹性力学的复变函数理论,用多保角变换的方法,导出了含有任意多个椭圆孔的无限大弹性板多复变量应力函数的表达式。每个孔的大小、位置和孔边作用的载荷均为任意指定。板的无限远处作用有和坐标轴方向一致的均匀拉压载荷P_x,P_y和均匀剪切载荷P_(xy)。并在孔边进行复Fourier级数展开,用待定系数法确定应力函数的未知系数,从而计算弹性板的应力场。编制了相应的FORTRAN77标准化程序,进行了考题和算例分析,给出了级数的收敛状况和孔边周向应力的分布图。     

HML系统在商店偏好决策模型中的应用研究

对混合式机器学习系统（HML）进行了全面系统的介绍，并将其运用于服装消费商店偏好决策行为的研究中。采用上海统计局家庭调查网络，对300户家庭进行抽样分析后发现，服装消费商店偏好的主要影响因素是地区、季节、丈夫和妻子的学历、职业以及子女性别。在此基础上，将HML分析所得的结论与传统的研究方法和结果进行了系统比较：从方法上来看，因为属性变量包含间断变量和连续变量两种，因此传统统计分析要运用两种不同的检测方法对影响因素的相关性作出判断，结果需要经过统计学分析，才能得到结论；而HML分析结果比较直观和简单，便于理解。     

美国MTS公司应用软件在测试上的应用

介绍了用美国ＭＴＳ公司的平面应变断裂韬度测试软件，对ＴＣ４合金进行ＫＩＣ测试的过程及结果。     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

阻尼材料在飞机炮振减振上的应用

阻尼材料在飞机结构上的应用是一个新课题。在飞机炮舱区应用新型阻尼材料,组成一个全新的阻尼结构系统来吸收由航炮射击时产生的冲击能量,以实现减振的设计目的,进而改善其炮击的振动环境。通过理论计算和地面试验实测,证明了应用新型阻尼材料可使炮舱区的动应力下降近30％。     

CFG桩复合地基应力比数值分析

本文采用有限元ANSYS程序对CFG桩复合地基的单桩桩体荷载传递规律、应力比及影响因素进行了分析,得出了减小应力比的方法和措施,对工程可起借鉴的作用。     

悬筐式蒸发器的结构设计

本文从设计角度对悬筐式蒸发器的结构进行了介绍和总结,并提出了一些结构的改进意见。