音频信号矢量编码算法

为了在保证译码恢复的声音质量良好的前提下,减小编码的压缩率,以减小声音信号的存储空间,提出了一种将线性预测编码、SOM神经网络矢量编码以及Huffman编码相结合的声音信号编码算法,将1列声音信号转换为2列信号,这样就可以进行后续的矢量编码。实现了预测编码和矢量编码的结合。利用Matlab软件编程进行了声音信号编解码实验。实验结果表明,在保证声音质量的前提下,该编码方法的码率小于MEPG-1 Layer3的最低的64kbps标准码率,且算法简单。文章提出的编码算法在音频压缩编码方面将具有较高的研究价值和很好的应用前景。     

Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题，以石英振梁加速度计为例，采用引进标准信号，将谐振电路作为“黑盒子”，对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标，与加速度计实际指标建立了一一对应的关系，为加速度计研制与性能提升提供了有效依据。实际运用表明，电路噪声性能、温度性能大幅提升，产品成品率从70%提高到了约90%。     

基于Hilbert-Huang变换的航天器发射段力学环境分析

文章基于Hilbert-Huang变换,对某载人航天器发射过程中整流罩分离期间测量的力学环境参数进行处理分析,利用HHT的基函数自适应性特点,得到振动时间历程信号的时频域Hilbert谱,准确识别出信号主频率及对应时间范围。此应用案例可为地面力学试验条件制定以及运载接口条件确定提供参考。     

正弦压力信号幅值测量无差算法研究

正弦压力校准常用比较法，通过比较标准压力传感器与被校压力传感器在同一正弦压力源中的响应完成被校传感器的幅值校准。对正弦压力信号幅值的测量算法进行了研究，提出了一种控制采样频率为标准激励信号频率整数倍的算法，可实现幅值的无差运算，理论推导和仿真实验表明，该算法能有效提高单频校准的准确度。     

Semi-supervised gear fault diagnosis using raw vibration signal based on deep learning

In aerospace industry, gears are the most common parts of a mechanical transmission system. Gear pitting faults could cause the transmission system to crash and give rise to safety disaster. It is always a challenging problem to diagnose the gear pitting condition directly through the raw signal of vibration. In this paper, a novel method named augmented deep sparse autoencoder (ADSAE) is proposed. The method can be used to diagnose the gear pitting fault with relatively few raw vibration signal data. This method is mainly based on the theory of pitting fault diagnosis and creatively combines with both data augmentation ideology and the deep sparse autoencoder algorithm for the fault diagnosis of gear wear. The effectiveness of the proposed method is validated by experiments of six types of gear pitting conditions. The results show that the ADSAE method can effectively increase the network generalization ability and robustness with very high accuracy. This method can effectively diagnose different gear pitting conditions and show the obvious trend according to the severity of gear wear faults. The results obtained by the ADSAE method proposed in this paper are compared with those obtained by other common deep learning methods. This paper provides an important insight into the field of gear fault diagnosis based on deep learning and has a potential practical application value.     

基于通用无线电外设的北斗信号仿真系统

研究了基于通用软件无线电外设(USRP)的北斗信号仿真系统。给出了北斗卫星电文的生成方式,使用Matlab读取星历信息并定义编码产生北斗卫星信号,并利用USRP实现北斗卫星电文的调制发射,利用接收机对该信号进行捕获接收,并对信号附加的多普勒频移进行仿真。最后通过接收机对仿真系统产生的信号进行接收验证。通过此仿真系统可更直观地研究北斗卫星信号,对研究北斗卫星导航系统具有一定的参考意义。     

空间目标监视雷达信号频率的优选准则

随着在轨微小卫星及空间碎片数量不断增加，为保证在轨卫星的运行安全，需要对微小目标进行有效跟踪探测及稳定编目。雷达作为近地空间目标监视的主用设备，在对厘米级小目标进行探测跟踪时，其工作频率是决定其能否可靠探测关键因素，高频有利于探测小目标，并可获得相对稳定的RCS，但高频信号的波束小、搜索能力较低，实现难度大，也使得成本过高。为适于实际工程应用，需从效费比出发，对频率进行优选。本文从目标RCS的角度提出一种空间目标监视雷达信号频率的优选准则，给出该准则下周长波长比ka的取值范围。为了更加清楚地说明该优选准则的应用，给出了直径5 cm和10 cm的目标在该准则下信号频率的取值范围，并与国外工作做了比较，证明该准则可行。     

基于旋转高频信号注入法的内置式永磁同步电机低速段转子位置检测及其误差补偿

旋转高频信号注入法注入信号较为稳定,且位置估计过程不依赖电机参数,因而十分适用于内置式永磁同步电机(IPMSM)的零、低速转子位置检测。针对传统高频信号注入法无法辨别磁极的问题,用电压方波注入法检测磁极,结合有限元软件仿真,来合理选取方波电压幅值和时长,有效缩短了磁极判断耗时。分析了滤波器和信号离散化对位置估计精度的影响,提出在低速段可用线段拟合带通滤波器中心频率处的相频特性曲线,推导所需补偿角度与电机转速的关系。在理论分析的基础上,采用基于DSP28335的样机平台进行试验,结果表明磁极判断过程稳定,耗时较短,补偿后的位置估计值相比补偿前有明显改善,调速过程中系统动态性能良好。