Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

Turbulence modelling of the aerodynamic interaction of OGV wakes and diffuser flow

Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes（OGVs） and a downstream annular pre-diffuser.Two statistical turbulence...     

Topological Studies of Three-dimensional Flows in a High Pressure Compressor Stator Blade Row without and with Boundary Layer Aspiration

This paper presents a numerical study of the flow topologies of three-dimensional (3D) flows in a high pressure compressor stator blade row without and with boundary layer aspiration on the hub wall. The stator blade is representative of the first stage operating under transonic inlet conditions and the blade design encourages development of highly complex 3D flows. The blade has a small tip clearance. The computational fluid dynamics (CFD) studies show progressive increase of hub corner stall with the increase in incidence. Aspiration is implemented on the hub wall via a slot in the corner between the hub wall and the suction surface. The CFD studies show aspiration to be sensitive to the suction flow rate; lower rate leads to very complex flow structures and increased level of losses whereas higher rate renders aspiration effective for control of hub corner separation. The flow topologies are studied by trace of skin friction lines on the walls. The nature of flow can be explained by the topological rules of closed separation. Furthermore, a deeper analysis is done for a particular case with advanced criterion to test the non-degeneracy of critical points in the flow field.     

拍一拍 扫一扫 赢取双重大礼包

正扫一扫,拍一拍,让您在贵宾室休息多一份乐趣和收获。出镜大使程艳大家好,我叫程艳,我是国航上海分公司浦东国际休息室的本期出镜大使。如果您能在我们国航浦东国际休息室为您竭诚服务的众多美女中认出我,用手机给我拍个照,并请扫一扫左侧二维码,通过微信发给《今日民航》杂志,您就能获得来自《今日民航》杂志和国航上海分公司为您送出的双重大礼包哦!     

Sensitivity Analysis for Safety Design Verification of General Aviation Reciprocating Aircraft Engine

This paper presents an application of global sensitivity analysis for system safety analysis of reciprocating aircraft engine. Compared with local sensitivity analysis results, global sensitivity analysis could provide more information on parameter interactions, which are significant in complex system safety analysis. First, a deterministic aviation reciprocating engine thermodynamics model is developed and parameters of interest are defined as random variables. Then, samples are generated by Monte Carlo method for the parameters used in engine model on the basis of definition of factor distribution. Eventually, results from engine model are generated and importance indices are calculated. Based on the analysis results, design is improved to satisfy the airworthiness requirements. The results reveal that by using global sensitivity analysis, the parameters could be ranked with respect to their importance, including first order indices and total sensitivity indices. By reducing the uncertainty of parameters and adjusting the range of inputs, safety criteria would be satisfied.     

Experimental Investigation of Nozzle Effects on Thrust and Inlet Pressure of an Air-breathing Pulse Detonation Engine

Nozzle effects on thrust and inlet pressure of a multi-cycle air-breathing pulse detonation engine (APDE) are investigated experimentally. An APDE with 68 mm in diameter and 2 050 mm in length is operated using gasoline/air mixture. Straight nozzle, converging nozzle, converging-diverging nozzle and diverging nozzle are tested. The results show that thrust augmentation of converging-diverging nozzle, diverging nozzle or straight nozzle is better than that of converging nozzle on the whole. Thrust augmentation of straight nozzle is worse than those of converging-diverging nozzle and diverging nozzle. Thrust augmentations of diverging nozzle with larger expansion ratio and converging-diverging nozzle with larger throat area range from 20% to 40% on tested frequencies and are better than those of congeneric other nozzles respectively. Nozzle effects on inlet pressure are also researched. At each frequency it is indicated that filling pressures and average peak pressures of inlet with diverging nozzle and converging-diverging nozzle with large throat cross section area are higher than those with straight nozzle and converging nozzle. Pressures near thrust wall increase in an increase order from without nozzle, with diverging nozzle, straight nozzle and converging-diverging nozzle to converging nozzle.     

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

在非结构网格上求解非线性航空声学问题的高精度有限体积法

介绍了有限体积数值方法,该方法适用于在任意非结构网格上求解线性和非线性的航空声学问题.本方法基于角点-中心的多参数格式,可在笛卡尔网格上达到六阶精度,对于可能的不连续性采用了自适应耗散.通过一系列算例研究了该方法的特性,结果表明:在模拟谐振型管中的噪声抑制中,所提出的方法是很有效的.     

基于粒子群神经网络的轮盘优化

将粒子群算法(PSO)和BP神经网络相结合,构建了一种新型智能结构优化算法.PSO方法除用于结构优化外,还被用于BP神经网络的构造及网络训练,使之可自适应调整优化.结构优化中,以BP神经网络取代有限元方法,通过设计变量来映射目标函数和约束,从而大大提高了计算速度.将此方法用于轮盘结构优化,使得轮盘体积减少了17.5%,结果通过检验.该方法便捷、高效,为解决工程结构优化问题提供了一个新途径.