首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   898篇
  免费   228篇
  国内免费   208篇
航空   1073篇
航天技术   52篇
综合类   194篇
航天   15篇
  2023年   12篇
  2022年   33篇
  2021年   42篇
  2020年   48篇
  2019年   64篇
  2018年   67篇
  2017年   63篇
  2016年   65篇
  2015年   52篇
  2014年   64篇
  2013年   60篇
  2012年   74篇
  2011年   70篇
  2010年   36篇
  2009年   53篇
  2008年   61篇
  2007年   67篇
  2006年   50篇
  2005年   43篇
  2004年   36篇
  2003年   44篇
  2002年   38篇
  2001年   28篇
  2000年   22篇
  1999年   27篇
  1998年   18篇
  1997年   23篇
  1996年   9篇
  1995年   10篇
  1994年   16篇
  1993年   6篇
  1992年   4篇
  1991年   8篇
  1990年   6篇
  1989年   5篇
  1988年   6篇
  1987年   4篇
排序方式: 共有1334条查询结果,搜索用时 15 毫秒
1.
马艳红  倪耀宇  陈雪骑  邓旺群  杨海 《航空学报》2021,42(3):223861-223861
航空燃气轮机为了实现高负荷、轻质化的追求,在转子结构设计中,趋向于提高转速和加大长径比。这使得转子系统弯曲模态临界转速降低,转子在工作转速范围内不可避免会产生一定的弯曲变形。转子弯曲变形会影响连接结构界面接触特性的变化,使其连接结构局部弯曲刚度产生损失。因此,对于工作转速靠近弯曲临界的高速转子系统,需要考虑连接结构界面接触状态变化对转子系统振动特性的影响。以高负荷的长拉杆-止口连接转子系统为对象,分析连接界面接触应力分布特性,提出连接结构弯曲刚度损失修正方法,以此为基础建立界面连接转子动力学模型。通过对止口连接三级轴流压气机转子结构动力学特性的仿真和试验研究表明,在靠近弯曲振型临界转速下,转子连接界面接触状态的变化会产生弯曲刚度损失,对转子动力学特性具有显著影响。  相似文献   
2.
张帆  冯引利  郭宝亭  李佳琦 《推进技术》2021,42(5):1138-1147
为研究燃气轮机周向分布式拉杆转子轮盘间存在的连接刚度对轴系转子振动特性产生的影响,本文提出一种基于六自由度的弹簧单元等效方法;首先将轮盘接触刚度与拉杆弯曲刚度同时等效进连接界面,便于使用一维梁单元求解其临界转速与振动响应变化,验证其与全三维有限元法吻合度在3%以内;然后改写了非线性动力学方程,采用谐波平衡法对其进行求解,使用经典Newmark方法验证其准确性;最后使用该等效方法计算了某模拟转子连接刚度对其临界转速、响应特性、非线性特性等的影响。计算结果表明:当连接面剪切刚度与弯曲刚度减小3个数量级,均造成了临界转速的降低和振动响应的提高,而其影响程度可由各阶振型大致推测,且响应幅值受剪切刚度影响较大;使用临界转速趋于收敛时的连接刚度与试验值的对比误差小于2%,较连续模型提升显著;在连接刚度各向异性时,每一阶临界转速均出现两个响应峰值,轴心轨迹变成椭圆;考虑刚度随位移变化(非线性刚度)后,转子的响应峰值发生“歪扭”特性,且该峰值特征随不平衡量、无量纲阻尼等因素变化而呈现“波浪形”变化。  相似文献   
3.
建立了四旋翼倾转飞行器旋翼、机翼、机身的非线性气动模型和飞行动力学模型,并在Matlab/Simulink环境下搭建了仿真模型,根据仿真模型计算各个操纵面的操纵效率,确定了不同状态下各个通道需要用到的操纵方式,结合飞行动力学模型和操纵方式,在纵向通道上进行了全包线的配平计算,表明了操纵策略的可行性。  相似文献   
4.
《中国航空学报》2020,33(4):1192-1205
Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.  相似文献   
5.
周金龙  董凌华  杨卫东 《航空学报》2020,41(4):223384-223384
直升机后缘襟翼多采用压电驱动器作为驱动元件,但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响,因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性,采用Bouc-Wen模型对驱动器迟滞现象进行了建模,并采用粒子群算法(PSO)辨识模型参数,与实际测量迟滞曲线进行了对比,在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略,实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型,并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真,仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能,而采用复合控制可以提高后缘襟翼旋翼振动控制性能。  相似文献   
6.
多支点柔性转子系统临界转速稳健设计方法   总被引:1,自引:0,他引:1  
基于响应面法和容差模型提出了定量考虑参数变差影响的转子系统临界转速稳健设计方法。该方法利用响应面模型获得多参数、多目标之间的函数关系,并以多阶临界转速分布为约束条件、以临界转速对支承刚度变差敏感度最低为设计目标。对小涵道比涡扇发动机低压转子系统临界转速稳健设计结果表明:在考虑各支点支承刚度变差情况下,采用多参数、多目标稳健设计方法,可保证多支点柔性转子系统的临界转速特性在满足设计要求的同时,转子系统临界转速对支承刚度变差的敏感度最低,验证了该方法的有效性。   相似文献   
7.
《中国航空学报》2020,33(6):1642-1660
Substantial unbalance may be caused by fan blade off during the operation period of gas turbine engines, and related dynamic problems are very critical to the safety design of rotor system in aero-engine. This article aims to understand lateral-torsional coupled vibration of the rotor system with substantial unbalance. The governing equation of a modified unbalanced rotor system is established based on Lagrangian approach. Then, a mathematical analytical method is proposed in which a linear approximation is derived and the Floquet theory and Hill’s method are incorporated, from which the modal characteristics of the unbalanced rotor are obtained. The modal characteristics of the unbalanced rotor system are revealed comprehensively for the first time. Furthermore, the relation between the modes and responses of the unbalanced rotor is discussed in detail. The results show that the lateral vibration and torsional vibration of the unbalanced rotor are coupled through the inertial terms in the governing equations. Due to the coupling, veering and lock-in phenomena occur between the frequencies of the forward whirl mode and the torsional mode. Furthermore, lock-in can lead to a kind of principal instability. With regard to the response of the unbalanced rotor, both natural vibration components and enforced vibration components appear in the lateral response, while only natural vibration components appear during torsional vibration. Moreover, natural vibration components play a crucial role in the response within the principal instability region and cause divergence of the vibration amplitudes in the lateral and torsional directions.  相似文献   
8.
带非线性支撑的转子有限元模型求解方法   总被引:1,自引:1,他引:0  
韩兵兵  丁千 《航空动力学报》2020,35(12):2616-2625
用数值方法研究了非线性支撑的柔性转子系统的动学行为,提出了一种将有限元与非线性支撑结合的模型和求解方法。利用有限元法(FEM)构建转轴和转盘部分的模型,通过矩阵进行组合;利用离散元方法对包含滚动轴承和挤压油膜阻尼器(SFD)的支撑部分进行建模,此部分包含4个单元,分别为轴承内圈、外圈、SFD内圈和支撑鼠笼。有限元部分和离散元部分通过轴端节点相连,仿真过程中轴端位移传递给非线性支撑部分,支撑部分通过位移计算得到的非线性力反过来作用于有限元转子轴端部分。为了耦合求解有限元转子和非线性支撑组成的数学模型,提出了一种综合的迭代求解方法,克服传统的有限元求解方法对轴端隐性非线性支撑的求解局限性。由于转轴部分采用了Timoshenko梁单元建模,对比与简单转子模型,可以考虑陀螺力矩和轴的柔性特征,更能体现非线性支撑对振动真实影响。在建立的20个轴单元的有限元转子模型中,非线性响应更多体现在靠近非线性支撑的节点1和节点21处,响应频谱中靠近轴端的节点能体现出滚动轴承的2倍和3倍变柔振动频率。  相似文献   
9.
为了研究当量油气比对内燃波转子燃烧特性的影响规律,采用控制变量法,保持内燃波转子转速、混气填充速度不变,通过调节燃料喷射体积流量改变混气的当量油气比。在不同的当量油气比下开展内燃波转子燃烧特性试验。试验结果表明:当量油气比对于内燃波转子燃烧过程影响很大,随着当量油气比的增加,内燃波转子获得的燃烧压力增益增大,在内燃波转子转速为900r/min、混气填充速度为6.741m/s、当量油气比为1.442时,6个工作循环内平均燃烧压力增益达到246.29%,火焰平均传播速度随当量油气比呈类似正态分布,在化学恰当比附近达到最大10.8m/s。当量油气比小于1时,两组工况下火焰锋面呈向下倾斜状传播,当量油气比大于1时,两组工况下火焰锋面呈向上倾斜状传播。   相似文献   
10.
With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号