基于光学测角数据的风云四号同步轨道卫星精密定轨

针对风云四号同步卫星的精密定轨和精度评估需求，首先利用地面光学测角数据对FY-4A卫星进行精密定轨，定轨后方位角和高度角的残差rms分别为0.25＂和0.45＂。与基于测距数据的轨道相比，位置精度在有测角数据的弧段内小于50m。进一步联合测角数据和测距数据对FY-4A卫星进行联合定轨，定轨后轨道重叠精度优于15m。利用联合定轨结果评估了基于测距数据的实时轨道产品精度，可以明显发现轨道精度随着测距数据的积累而逐步提高。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

面向快速响应产品的星上目标定位及识别方法

针对遥感卫星星上目标的定位及识别，本文面向快速响应应用需求，首先对星上目标定位及识别工作模式进行研究，总结出狭义和广义两种模式，其次重点对像方-物方坐标双向定位算法进行梳理，并针对典型地物目标星上自动识别算法提出研究思路，最后给出算法的应用方法流程。本文研究为快速响应产品星上智能处理提供方法参考。     

无缓凝剂磷酸镁修补砂浆的力学性能实验研究

磷酸镁水泥(Magnesium phosphate cement,MPC)是一种快速修补型胶凝材料,具备快硬、早强、高强、粘结力强、耐久性好等优点。首先运用正交试验方法,通过控制胶砂比、氧化镁与磷酸二氢盐的物质的量比(M/P)和水胶比,确定了基准MPC修补砂浆的最优配合比。然后研究了粉煤灰和磨细矿渣对MPC修补砂浆抗压强度和抗折强度的影响,分析了其强度特征。结果表明,MPC修补砂浆的最佳M/P比为6∶1,胶砂比1∶1。掺加粉煤灰的MPC修补砂浆具有较高的强度尤其是抗折强度,适宜作为道路与机场道面的快速修补材料。掺加磨细矿渣的MPC修补砂浆,其力学性能不如掺加粉煤灰的MPC修补砂浆。此外,MPC修补砂浆的抗折强度和抗压强度之间具有密切的线性相关关系,且与养护龄期、原材料来源与烧结温度、是否掺加缓凝剂和矿物掺合料、M/P比和水胶比等因素无关。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

基于连续同伦算法的天基仅测角初定轨方法

要进一步提高天基短弧初定轨的精度,在观测资料精度较高的情况下,仅考虑二体问题是不够的,还应考虑轨道摄动的影响。因此,基于无摄初轨的单位矢量法原理和矢量斜分解方法,给出了考虑摄动的天基仅测角初定轨单位矢量法。针对天基仅测角观测条件方程组求解过程中易出现迭代不收敛或收敛到平凡解的问题,引入连续同伦算法求解观测条件方程组,提出了单星观测方式下的空间目标天基仅测角初定轨方法,并通过数值仿真算例验证了该算法在较大范围的收敛性和数值稳定性。     

民机货舱用抗烧穿双向快速泄压装置的设计

民航史上一起由于“货舱泄压”引发300多人丧生的空难对货舱快速泄压装置提出了技术需求。描述了现有国外民机货舱快速泄压装置的三种典型结构,并对比分析这三种结构的快速泄压装置的优缺点。基于国内某型号民机货舱快速泄压装置的研制和试验经历,提出了一套全新的货舱快速泄压装置的设计流程,并总结其设计要点,供国内民机货舱快速泄压装置设计参考。     

用户星中继终端在轨应用策略

在介绍在轨用户星中继终端的分类、功能和使用现状的基础上,重点对用户星中继终端多约束条件进行了梳理分析。为缓解常态化应急测控带来的资源紧张矛盾,提出了用户星中继终端在轨应用策略,即Ka/S模式下影随测控,小S模式下定时捕获。针对Ka+小S模式下实现影随测控的可行性问题,利用STK(Satellite Tool Kit,卫星开发工具包)软件进行了仿真计算分析,结果表明:为实现影随测控,满足测控快速响应需要,要求星载S频段中继测控天线对中继卫星的覆盖范围,应大于星载中继数传天线对中继卫星的覆盖范围。     

基于粒子群算法的极短弧定轨

针对经典的初轨计算方法在极短弧定轨中不适用的情况,建立了一种基于粒子群算法的极短弧(TooShort-Arc,TSA)定轨的计算方法。该方法将问题转化为两个三变量的分层优化问题,采用(a,e,M)作为优选变量,在保持问题维数较低的同时,实现了计算结果和观测资料的解耦。由于实测资料处理中的野值剔除方法不适用于粒子群算法,所以,采用稳健估计法,通过在适值函数中使用最小中值二乘准则,实现了稳健的极短弧计算方法。同时,应用MATLAB计算软件,选用缺省参数实现该算法,以进行数据验证。基于实测数据的数值验证表明,方法对于近圆轨道目标30s以下的弧段仍可以获得有效的结果,10s弧段误差仅为16km。此精度满足后续处理的需要,且方法稳健,具有很高的崩溃点。