Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions

Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.     

基于单目视觉原理的空间位置测量技术研究

为了提升空间位置测量的自动化程度，采用单目视觉原理建立空间成像方程，将三维的空间坐标转换为两维的图像坐标，由此实现单目视觉的空间位置测量。本文推导了单目视觉定位的基本成像方程，对建立的定位装置，进行了实际定位实验，实现了预期的测量结果。基于视觉原理的空间位置测量技术，具有良好的推广应用价值。     

A systematic spatial bias in remembering eye positions

Categorical bias in location memory in geometric spaces is well established. The present study assessed the presence of the bias in locating eyes in images of human faces. Participants were presented with digital faces and indicated the position of one of the eyes in both upright and inverted orientations. Biases resulted from participants using multiple sources of accessible information. No differences were found for upright vs. inverted face images. Overall, the data were consistent with the retrieval category adjustment model. These distortions may be considered within the forensic context, when eyewitnesses work with a sketch artist or use a computer program to generate an image of the culprit.     

某机载探测系统自主回收技术的实现

针对某机载探测系统探头回收自动化程度低的问题，提出了在无需操作员干预情况下实现探头自主回收的技术方法。采用了先进的控制算法，将缆位角与探头、缆长进行结合并引入了绞车控制系统，使绞车对探头的回收速度及缆长可进行实时调整，并给出了3种不同缆位角摆动条件下缆长与探头回收速度的控制曲线关系。研发了自主回收装置，设计了能够实现自主回收功能的探头回收机构。实验验证表明：在无需人为干预的条件下，在缆位控制系统及自主回收机构的配合下，系统实现了对探头快速、安全的回收。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

基于马鞍形磁场的永磁直线电机位置解算方法

针对直线电机转子位置检测低成本和较高精度的要求,提出了一种基于马鞍形磁场来获得位置信息的方法及实现过程。分析了永磁体表面的磁场分布特征,指出了利用马鞍形磁场分布曲线来解算位置信息的优点,提出了根据马鞍形磁场推算位置信息的算法流程:先测得错开相位的2条马鞍形曲线数据,划分为4个象限后建立数据库；位置检测时,运用区间搜索算法寻得实际角度所在区间；再根据精度要求,采用合适的插值算法计算得到待解算的角度。仿真结果表明:基于马鞍形磁场的位置解算,能较好地得到直线电机转子的位置信息。     

盘腔进气位置对径向预旋系统的影响

为减少径向预旋系统的流动损失,运用数值模拟方法对不同盘腔进气位置的径向预旋系统进行分析,结果表明:随着盘腔进气径向位置的增加,预旋喷嘴出口气流旋流比随之逐渐减小,径向预旋系统的温降系数及总压损失系数均随之逐渐增大。当旋转雷诺数等于7.9×106,盘腔进气位置由低位向高位变化时温降系数最大可增加525%,同时总压损失系数增加3.93%。径向预旋系统内比熵增主要发生在预旋喷嘴和共转腔,约占系统总体比熵增的80%。随着盘腔进气径向位置的增加,径向预旋系统总体比熵增降低,预旋喷嘴比熵增占比逐渐增大,共转腔比熵增占比逐渐减小。     

变结构控制在基于脉冲比例阀的燃油调节系统中的应用

针对航空发动机燃油控制系统中二阶非定常执行机构通常出现设计困难的问题,介绍一种变结构控制方法,将二阶非定常执行机构变成确定的一阶惯性环节,该方法既充分利用其优点"不变性"又可以规避其突出缺点"抖振",特别适用于驱动脉冲比例调节阀;同时提出脉冲比例阀的变结构调节中遇到的实际问题(例如微分的精度问题)的解决办法,以及影响该方法可行性的若干必要条件。结果表明:符合条件时变结构控制在基于脉冲比例阀的燃油调节系统中是可行的。     

基于制导信息的一维波束可控随机脉位脉冲多普勒引信技术研究

针对空空导弹引信的任务特点,综合采用了基于制导信息的起爆控制算法技术、自适应调整天线波束倾角技术、基于频域信号处理的数字信号处理技术设计了总体技术方案.仿真分析和试验表明,系统实现了对作战飞机、导弹等不同类型目标的智能探测,提高了对目标的探测灵敏度和抗干扰能力.     

AFDX流量管制信用量设置的模型检查

航空电子全双工交换式以太网（AFDX）实时通信中,交换节点采用信用量令牌桶（creditedtoken bucket）进行流量管制。分别对基于帧和基于字节的信用量令牌桶流量管制进行时间自动机建模,并构建模型的并发交互场景;采用测试自动机,进行有界活性（bounded liveness）模型检查。通过形式化验证,发现流量管制通过约束突发度限制多路复用输出排队的时延抖动,但信用量值的设置必须考虑输入虚拟链路（VL）的时延抖动,否则可能导致已经聚合的流量中属于不同VL的帧的先后次序被破坏,反而造成更大的时延抖动。通过分析时延抖动对信用量设置的影响,归纳并给出流量管制信用量设置的注意事项。