Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.     

平台式重力仪航空重力测量数据后处理技术研究

针对航空重力测量对数据后处理的要求,结合平台式重力仪系统的组成与工作原理,在重力异常信号的频域特征基础上,设计出一套有严格频域规范的航空重力数据后处理流程,并对某海域实测数据进行了处理。结果表明,重力异常值内符合精度为12条东西测线达到0.43mGal/140s和0.84mGal/100s,4条南北测线达到0.39mGal/140s和0.79mGal/100s;以同测线GT-2A单次测量结果为标准值统计标准差,12条东西测线为0.72mGal/140s和0.98mGal/100s,4条南北测线为1.41mGal/140s和1.53mGal/100s。结果表明,设计的航空重力测量数据后处理方法可以实现重力异常信号的高精度提取。     

大型平台的惯性稳定与地理坐标系姿态跟踪

介绍了一种大型两轴稳定平台的惯性稳定和地理系姿态跟踪原理,建立了稳定平台俯仰框架和横滚框架的运动学模型和动力学模型,进行了稳定平台横滚通道的角速度回路和角位置回路设计,仿真分析了姿态角测量误差作用下的稳定平台姿态跟踪性能,与利用加速度计反馈实现调平的两轴阻尼稳定平台进行对比,比对结果验证了本文设计的控制系统在水平姿态跟踪速度和抗干扰能力上的优势.平台样机进行了姿态跟踪测试,结果验证了结合定位定向系统(POS)的稳定平台惯性稳定和姿态跟踪控制方法可行.     

基于滑模反演控制的稳定平台齿隙非线性补偿

针对航空遥感惯性稳定平台中齿隙非线性带来的不稳定问题，结合反演控制和滑模控制的优点，在传统反演控制的每一步迭代过程引入与齿轮运动状态相关的基于连续饱和函数的动态滑模面，设计了相应的滑模反演控制器。在保证了系统误差快速收敛的同时，抑制了反演过程中的误差积累，实现了系统非线性误差精确补偿。仿真实验结果表明，与传统反演控制相比，滑模反演控制显著降低了齿隙非线性对系统动态性能的影响，有效提高了系统对期望角位置、角速度的跟踪性能。     

空间稳定型捷联惯导系统静态误差分析

定量分析空间稳定型捷联惯导系统的误差传播特性,以便实现惯导系统对战术技术指标及元部件对自身精度指标的设定要求.首先设计了一种用于地球表面导航的船用空间稳定型捷联惯导系统方案,然后通过求解静基座状态下的该种捷联惯导系统误差方程,分析了陀螺常值漂移以及加速度计零偏对空间稳定型捷联惯导系统的影响.理论分析以及实物试验表明陀螺常值漂移会造成经度误差随时间线性增长,其它导航信息按舒勒频率和地球频率等幅振荡传播.     

WL10型近红外反射式光电传感器的研制

依据光学电子学的相关原理，针对烟草行业自动生产过程中对传感器的需要，研制了ＷＬ１０型近红外反射光电传感器，并成功地应用于烟草行业的生产线上。     

三轴陀螺稳定平台伺服回路全姿态解耦及变增益控制方法

在载体大机动飞行背景下，要求惯性平台具备全姿态的功能。国内现有的三轴陀螺稳定平台（简称三轴平台）不具备全姿态的功能，在内框架增加了限位挡钉以限制内框架角的工作范围，主要是基于内框架角不能工作在接近于?90?的认识。为了准确描述全姿态条件下三轴平台的运动规律，本文指出了传统动力学推导过程中的不足之处，重新建立了三轴平台的动力学模型，基于该模型给出了非奇异的全姿态伺服回路并提出了一种新的全姿态解耦方法，包括力矩解耦和转动惯量解耦。最后，针对转动惯量在框架转动过程中非定值的问题，提出了基于H∞控制理论的变增益控制策略。仿真结果表明，变增益控制器相对定常参数控制器可显著改善三轴平台伺服回路控制的性能。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

放映氙灯稳流及稳纹波电路研究

本文简要介绍了放映氙灯电源的现状,详细研究了由中国民航学院三维显示技术研究所最新研制成功的放映氙灯电源中的稳流及稳纹波电路的设计思想和工作原理。理论分析和实验结果表明,本文设计的稳流及稳纹波电路显著地提高了氙灯电源的可靠性及减小了氙灯电流的纹波系数且操作简便,利于推广应用。     

带充液腔的自旋卫星稳定性问题

本文应用Pfeiffer的思想讨论带轴对称充液腔的卫星系统自旋稳定性。本方法的基本思想为将轴对称腔内的液体旋度平均化,使之与空间位置无关,由此将液体的无限自由度问题离散化为有限自由度问题,从而用线性理论讨论系统的自旋稳定性。用这方法,本文讨论了带充液腔的非轴对称卫星系统、带充液腔的双自旋卫星系统的自旋稳定性,给出了它们的自旋稳定性判据。此外,本文还给出了一些带有不同形状腔体的卫星系统自旋稳定域图,为实际工程设计人员提供理论参考。