航天器视场遮挡分析方法研究

敏感器视场遮挡分析是航天器构型布局设计的重要组成部分，针对大型在轨变构型航天器敏感器视场遮挡分析工作量大、出错率高、遮挡率无法量化等特点，本文提出一种基于敏感器第一视角的视场遮挡快速分析方法。该方法通过设置第一视角图像蒙版及图像映射，模拟方锥形、圆锥形、球形等各类敏感器视场，通过逐个像素比对，计算视场遮挡率和遮挡方位。使用此方法建立了空间站敏感器视场遮挡分析系统，结果表明新方法能够显著提高视场遮挡分析效率和准确率，并且为机构类部件运动过程对敏感器视场遮挡的分析提供了有效工具。     

飞秒激光系统图像调焦装置以及方法

飞秒激光直写技术在复杂三维微结构加工领域具有显著优势，而调焦是否精准直接影响了所加工结构的完整度.提出了在光路中临时置入调焦光源和物的图像调焦技术，通过调节物的位置使其成像面与激光聚焦面一致，从而通过清晰可分辨的成像状态间接反映激光聚焦状态.利用Zemax软件模拟分析了原飞秒激光光路与加入调焦光源和物的调焦光路，二者可实现相同加工物镜后工作距离与良好成像质量，证明了该方法的可行性.通过分析得到该过程的成像误差主要由成像镜头焦深(3.9 μm)引起，我们获得的理想调焦精度可达到1/2焦深以内.设计了单层高度为5 μm的二层圆柱结构，通过多次实验验证了所加工元件高度误差在1.5 μm范围以内，与理论分析一致，满足飞秒激光系统的调焦要求.     

Alfvén gravity waves in viscous solar plasma: Effect of the background flow

We study the Propagation and damping properties of Alfvén gravity waves in the presence of the vertical magnetic field in the viscous solar plasma under influence of the background flow by deriving a fourth order dispersion relation in terms of the Doppler shifted frequency. We derive the dispersion relation under WKB and Boussinesq approximation. We study the damping of Alfvén gravity waves for the wave frequencies less than and greater than the Brunt-Väisälä frequency. We find that the Brunt-Väisälä frequency divides the frequency ranges where the weakly or strongly damped oscillations occur. The background flow exhibits a strong effect on weakly damped oscillations and a weak effect on the strongly damped oscillations. We also notice that the damping of both the strong and weakly damped oscillations depend on the Brunt-Väisälä frequency and wave number. The effect of the background flow is also being governed by the Brunt-Väisälä frequency and wave number. We also study the properties of gravity wave mode after filtering the Alfvén wave mode by minimizing the magnetic field and noticed that the background flow shows a very strong effect on the gravity wave mode.     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低，功耗低的优点，在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点，提出了一种利用基于OPTICS聚类算法的空间目标检测方法，可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点，并结合星图识别的结果选择部分帧，使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后，使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中，目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法，减少了在轨任务中相关参数的调节，进一步提升了算法的自主性.     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分，产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料，归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准，将大幅提高测量准确度和稳定性，结合量子效应的微加工技术实现芯片尺度的测量等，微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

基于EM‑EKF的深空光学自主导航系统光轴偏差补偿算法

在深空探测任务中,光学自主导航的精度受导航敏感器件安装精度的影响较大。提出了一种基于期望最大化-扩展卡尔曼滤波(EM-EKF)的光学自主导航系统光轴偏差补偿算法。算法基于条件概率的思想,预先设定状态变量和观测量的统计特性参数,通过不断地最大化条件期望,得到出现概率最大的状态变量估值和光轴偏差参数估值。该算法可分为4步:EKF、固定区间平滑、求解条件期望和期望最大化,不断迭代即可得到光轴偏差估计值。以火星探测近火段为例进行仿真验证,经光轴偏差补偿后,导航精度由100 km提升至20 km以内。     

基于幅频响应特性的半球谐振子频率裂解与固有刚度轴方位角测定方法

半球谐振子频率裂解与固有刚度轴方位角是影响陀螺性能指标的核心因素。提出了一种基于幅频响应特性的半球谐振子频率裂解与固有刚度轴方位角测定方法，采用压电激振台扫频激振，多普勒激光测振仪检测谐振子的幅频响应特性，通过幅频响应特性曲线分析实现频率裂解与固有刚度轴方位角的测定。对该方法进行了理论分析，搭建了实验装置，并对半球谐振子进行了测试，结果表明：该方法频率裂解测量精度优于0.01Hz，固有频率主轴方位角确定精度优于±1.17°，具有良好的可行性，在半球谐振陀螺研制方面具有良好的参考意义。     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.