速度脉动下分层旋流火焰动态传播结构提取

为了深刻理解分层旋流火焰的动态结构，开展了分层旋流火焰动态的模态分析和参数化研究。实验在BASIS （北京航空航天大学发展的具有台阶隔离段的独立分层旋流燃烧器）上开展，以甲烷为燃料预混燃烧，使用高速摄像捕捉了速度脉动下的CH*化学发光信号动态图像。利用传统的本征正交分解（POD）和重定向POD分析了火焰动态特性，并利用重定向POD提取了火焰动态中沿着轴向和径向的周期性传播结构，传播结构的频率与速度脉动频率保持一致，且轴向模态的传播结构最为明显。同时，研究了总当量比对重定向POD模态的影响，分析表明：总当量比增大时，重定向POD模态的拓扑结构会发生变化；重定向POD模态中出现了错位现象，这种现象与相平均图像中的火焰传播行为保持一致。重定向POD方法能够有效提取旋流火焰动态中的传播结构，为旋流火焰燃烧不稳定性的机理研究提供了一种分析工具。     

Weibull分布参数估计值对细节疲劳额定强度的影响

将新材料、新工艺应用于民机结构设计时，细节疲劳额定强度（DFR）法仍是重要的评估方法。根据新型铝合金疲劳试验数据，全面分析了Weibull分布形状参数对DFR计算参数的影响；分析标准S-N曲线斜度参数对DFR的影响时，应考虑可靠性寿命的变化，采用低可靠度寿命计算曲线斜度参数可降低Weibull分布形状参数的影响；比较了采用不同分布参数估计值与传统上采用波音公司给定值进行DFR计算的差异。结果表明，对于通过符合性检验的试验数据，使用不同Weibull分布的参数估计值计算得到的DFR都大于按传统方法（用波音公司给定值）的计算结果，其中，三参数Weibull分布计算的DFR最大，至少增加10%以上。     

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

Effects of wing flexibility on aerodynamic performance of an aircraft model

The low-speed wind tunnel experiment is carried out on a simplified aircraft model to explore the influence of wing flexibility on the aircraft aerodynamic performance. The investigation involves the measurements of force, membrane deformation and velocity field at Reynolds number of 5.4 × 10⁴–1.1 × 10⁵. In the lift curves, two peaks are observed. The first peak, corresponding to the stall, is sensitive to the wing flexibility much more than the second peak, which nearly keeps constant. For the optimal case, in comparison with the rigid wing model, the delayed stall of nearly 5° is achieved, and the relative lift increment is about 90%. It is revealed that the lift enhanced region corresponds to the larger deformation and stronger vibration, which leads to stronger flow mixing near the flexible wing surface. Thereby, the leading-edge separation is suppressed, and the aerodynamic performance is improved significantly. Furthermore, the effects of sweep angle and Reynolds number on the aerodynamic characteristics of flexible wing are also presented.     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

基于矩化GO法的某型电动飞机扰流板系统可靠性

扰流板冗余系统提升了新能源电动飞机的可靠性。采用GO法建立电动飞机扰流板系统可靠性模型，设计SIMULINK仿真界面，针对操作符11给出一种新的运算模块。针对扰流板冗余系统设计一种矩化操作符，给出运算流程，有效减少传统GO法在冗余系统建模工作量，利用故障树分析法对结果进行验证。结果表明，本文提出的方法切实可行，为新能源电动飞机扰流板系统可靠性分析提供了新的思路。     

Discrete time multiple spacecraft formation flying attitude optimal control in presence of relative state constraints

This paper addresses the challenge of synchronized multiple spacecraft attitude reorientation in presence of pointing and boundary constraints with limited inter-spacecraft communication link. Relative attitude pointing constraint among the fleet of spacecraft has also been modeled and considered during the attitude maneuvers toward the desired states. Formation fling control structure that consists of decentralized path planners based on virtual structure approach joint with discrete time optimal local controller is designed to achieve the mission’s goals. Due to digital computing of spacecraft’s onboard computer, local optimal controller based on discrete time prediction and correction algorithm has been utilized. The time step of local optimal algorithm execution is designed so that the spacecraft track their desired attitudes with appropriate error bound. The convergence of the proposed architecture and stability of local controller’s tracking error within appropriate upper bound are proved. Finally, a numerical simulation of a stereo imaging scenario is presented to verify the performance of the proposed architecture and the effectiveness of the algorithm.     

高热流密度燃烧室壁面阵列空气射流-燃油组合冷却结构研究（爆震专刊）

针对高热流密度燃烧室壁面热防护需求提出了一种空气阵列射流冲击和燃油冷却肋板的集成冷却方式,在射流平均雷诺数(Re_j)为10000至30000、燃油进口流速(v_f)为2.33m/s至5.23m/s的范围内,采用数值模拟方法对其传热特性进行了研究,并基于壁面加热侧当量对流换热系数的概念,分析了基准肋板以及燃油冷却肋板的传热增强作用。与无肋板靶面的阵列射流冲击相比,带肋板阵列射流冲击的面积平均当量对流换热系数是前者的1.6倍,压力损失系数相对提高了约25%；采用燃油冷却肋板,加热壁面综合传热能力进一步增强,在Re_j=10000时,采用燃油冷却肋板的面积平均当量对流换热系数是基准肋板的1.5倍以上,即使在Re_j=30000时,燃油冷却肋板的传热增强比也可以达到1.2；燃油冷却肋板的出口温度相对进口温度的提升在20K~50K范围内,其提升幅度随着射流雷诺数或燃油进口流速的增大而减小。     

受轮缘密封结构影响的1.5级涡轮封严流与主流的相互作用以及轮缘密封间流动干扰

为探究动叶上游不同轮缘密封结构封严出流对1.5级涡轮端区流场及轮缘密封间流动干扰的影响区别，通过Shear Stress Transport （SST）湍流模型对无密封腔室，上游密封结构分别为简单斜向、简单径向，下游密封腔室为简单轴向的1.5级涡轮进行了非定常数值模拟。结果表明：轮缘密封间干扰使带径向密封结构模型的下游轮缘腔室内封严效率偏低，并增强了固有的非定常不稳定特性。上游密封结构变化对动叶和第2级静叶流动的影响差异分别位于35%、65%叶高范围内；径向密封结构增加了上游静叶的堵塞效应、动叶入口气流的欠偏转程度、叶根吸力面负荷与14%叶高以上的轮毂通道涡强度，并在第2级静叶入口处产生更多低频压力波动，使其尾缘脱落涡尺度增大但13%叶高以上的轮毂通道涡强度较弱。与无密封腔室相比，通入封严气体总量为主流流量的0.8%时，带斜向密封结构的1.5级涡轮气动效率降低了0.94%，且带径向密封结构的1.5级涡轮气动损失额外增加了0.17%。     

一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题，提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先，利用伪状态理论，通过简单迭代设计中途修正的初值，并通过Vinti预报方法修正了地球扁率的影响。然后，在求解精确解时，提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值，降低了求解地月转移轨道中途修正问题的难度，而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明，该算法可有效求解中途修正问题。