首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   4841篇
  免费   1003篇
  国内免费   1075篇
航空   4138篇
航天技术   982篇
综合类   734篇
航天   1065篇
  2023年   58篇
  2022年   164篇
  2021年   201篇
  2020年   227篇
  2019年   181篇
  2018年   180篇
  2017年   257篇
  2016年   275篇
  2015年   231篇
  2014年   302篇
  2013年   276篇
  2012年   346篇
  2011年   381篇
  2010年   317篇
  2009年   332篇
  2008年   294篇
  2007年   304篇
  2006年   295篇
  2005年   228篇
  2004年   201篇
  2003年   199篇
  2002年   164篇
  2001年   156篇
  2000年   129篇
  1999年   114篇
  1998年   126篇
  1997年   125篇
  1996年   111篇
  1995年   106篇
  1994年   128篇
  1993年   97篇
  1992年   89篇
  1991年   100篇
  1990年   77篇
  1989年   67篇
  1988年   54篇
  1987年   18篇
  1986年   9篇
排序方式: 共有6919条查询结果,搜索用时 15 毫秒
1.
A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.  相似文献   
2.
《中国航空学报》2021,34(10):282-292
The accurate measurement of surfaces of large aviation components is vital for the assessment of manufacturing and assembly quality of such components. To satisfy the measurement requirement of large-size components, most current researches pay more attention to combined measurement methods utilizing different measuring instruments, but the related researches on error analysis and optimization methods are not taken enough attention. This paper proposes a combined laser-assisted measurement method with feature enhancement techniques, and it also develops an error propagation model of the main factors affecting the overall measurement error in detail. Firstly, the surface of a large-size component is measured by the measurement system at multiple stations. Secondly, a control point coordinate system is established as a bridge to unify all local measurement data into the global coordinate system. To improve the overall measurement accuracy, the pixel extraction error as a key factor causing the overall measurement error is analyzed in detail. Next, the error propagation model is established, and some optimization strategies of layout for minimizing measurement error and transformation error are researched. Finally, experiments are carried out to verify the effectiveness of the proposed method. The results show that the measurement error of the proposed method reaches 0.073% and 0.14% with a 1D standard ruler and a flat plate, respectively.  相似文献   
3.
高丽敏  姜衡  葛宁  杨冠华  陈顺 《航空学报》2021,42(3):124120-124120
压力敏感涂料测量技术在内外流表面压力测量方面具有独特的技术优势。涂料光谱特性及"传感器"特性的研究对于分析喷涂固化中环境差异等不可控因素的影响程度、检验拟用涂料配方特定试验的适用性具有十分重要的意义。为此,以一种在研的磷光压力敏感涂料为对象,基于自主研发的静态校准系统对发光寿命随压力与温度的变化规律进行了实验研究,通过对测量结果的拟合分析发现所用涂料的温度适用范围在30~60℃之间,且可进行温度敏感度修正;基于自主研发的高频动态压力光学校准系统对涂料在不同压力脉动频率下的涂料发光寿命峰峰值规律进行了实验研究,通过分析研究确定所用涂料基于发光寿命的截止频率上限为0.94 kHz。实验研究进一步验证了涂料特性静动态校准组合方法的可行性与有效性,为压力敏感涂料配方的研发及其应用拓展提供了重要的技术支撑。  相似文献   
4.
为了使N形杆在空间结构中顺利展开,对其缠绕过程中的力学特性进行了分析。基于协变基向量法建立了纯弯曲条件下各向同性单片带簧在缠绕时应变能理论模型,并采用最小势能原理推导了弯矩的理论模型,然后通过拟合曲率推导了N形杆缠绕时的理论模型。研制了4根N形杆样件,并搭建了试验平台,使用数显式推拉力计分别对杆件在缠绕过程的拉力进行了5次测试,然后求出峰值力矩,发现试验值与理论值的偏差不大于8.83%,偏差平均值为2.813%,从而验证了理论模型的准确性。该研究可用来分析超弹性杆在纯弯曲状态下的峰值力矩,对超弹性杆在宇航空间中的应用具有重大意义。  相似文献   
5.
针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法。在拉氏步,流体力学方程组采用中心型间断有限元方法求解。对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标。界面重构采用一种健壮的MOF(Moment of Fluid)方法。在重映步提出了基于多边形相交的二阶积分守恒重映方法。该方法分为四个部分:多项式重构、多边形相交、积分和后验校正。多边形相交使用"剪裁投影"算法,显著降低了多边形相交算法的复杂度。后验校正是基于MOOD (Multi-dimensional Optimal Order Detection)限制策略,并做了一些改动以适应多介质的计算。数值算例表明,该方法具有二阶的精度和较好的鲁棒性。  相似文献   
6.
郭峰  朱剑锋  尤延铖  邢菲 《航空学报》2021,42(7):124755-124755
基于高斯伪谱航迹优化方法,建立了"火箭辅助型涡轮基组合动力"的飞行器/推进系统匹配分析方法,针对地面水平起降、以马赫数5巡航的高超声速飞行器,以巡航航程最远为目标,完成了涡轮基组合动力(TBCC)与火箭的耦合特性分析及匹配优化设计。研究结果表明:对于可行的TBCC方案(起飞推重比为1.0),引入合适推力的火箭有助于提升加速爬升段的总效率并降低质量消耗,且对巡航航程有着一定的提升(4%起飞重量推力火箭可增加航程0.97%);对于不可行的TBCC方案(起飞推重比为0.8),引入火箭不仅可实现推进系统方案的收敛,且其巡航航程相比可行的TBCC方案最多可增加7.9%。考虑到TBCC较大的"死重"和较低的单位迎面推力对巡航性能的不利影响,结构质量占比为25%的巡航型飞行器建议采用"13%起飞重量推力火箭辅助起飞推重比为0.7的TBCC "推进系统。相比之下,结构质量占比为55%的加速型飞行器建议采用" 5%起飞重量推力火箭辅助起飞推重比为0.98的TBCC"推进系统。  相似文献   
7.
《中国航空学报》2021,34(5):617-627
In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.  相似文献   
8.
《中国航空学报》2021,34(12):187-204
Unmanned Aerial Vehicles (UAVs) play a vital role in military warfare. In a variety of battlefield mission scenarios, UAVs are required to safely fly to designated locations without human intervention. Therefore, finding a suitable method to solve the UAV Autonomous Motion Planning (AMP) problem can improve the success rate of UAV missions to a certain extent. In recent years, many studies have used Deep Reinforcement Learning (DRL) methods to address the AMP problem and have achieved good results. From the perspective of sampling, this paper designs a sampling method with double-screening, combines it with the Deep Deterministic Policy Gradient (DDPG) algorithm, and proposes the Relevant Experience Learning-DDPG (REL-DDPG) algorithm. The REL-DDPG algorithm uses a Prioritized Experience Replay (PER) mechanism to break the correlation of continuous experiences in the experience pool, finds the experiences most similar to the current state to learn according to the theory in human education, and expands the influence of the learning process on action selection at the current state. All experiments are applied in a complex unknown simulation environment constructed based on the parameters of a real UAV. The training experiments show that REL-DDPG improves the convergence speed and the convergence result compared to the state-of-the-art DDPG algorithm, while the testing experiments show the applicability of the algorithm and investigate the performance under different parameter conditions.  相似文献   
9.
王磊  毛军逵  邱长波  赵伟  何辉 《推进技术》2021,42(11):2506-2514
针对目前航空发动机空气系统稳态算法中收敛性依赖初值的问题,将蒙特卡罗方法与流体网络法综合应用到空气系统可压缩流体一维网络计算中,提出了一种新的计算方法Monte Carlo-Fluid Network(MC-FN)。该方法将空气系统简化为由节点和元件组成的网络,借助蒙特卡罗方法获得空气系统内各节点压力分配,再根据空气系统中各元件流阻特性和换热特性计算流量、温度。计算中通过将游动次数比较少的蒙特卡罗方法的计算结果作为流量残差法节点压力、温度的初始值,实现快速求得精确收敛解。与流量残差算法相比,MC-FN方法计算精度不变,收敛速度提升了66.5%;与线性求解法相比,MC-FN方法的计算精度提升了25.2%,收敛速度提升了43.8%。  相似文献   
10.
针对现有对刀方法存在的各种不足,提出了一种微小刀具的同轴全息对刀方法。在对全息成像原理和全息图像关键问题进行研究与分析的基础上,搭建了一套微细铣刀的全息对刀检测装置,并利用标准刀具在五轴加工中心进行了微细铣刀的对刀测量试验。试验结果表明:该对刀装置能够高效地进行微细铣刀的对刀检测,系统相对检测精度达5.1μm。在相同检测条件下,与高精度机外预调仪的测量结果相比,接触式对刀仪的相对误差为0.033%,而全息对刀样机的相对误差为0.007%,后者更能有效地实现微小刀具的对刀检测。该结果验证了微小刀具的同轴全息对刀方法的可行性,即全息测量可用于微细铣刀的高精度对刀。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号