首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1322篇
  免费   342篇
  国内免费   286篇
航空   1311篇
航天技术   250篇
综合类   191篇
航天   198篇
  2023年   18篇
  2022年   38篇
  2021年   64篇
  2020年   63篇
  2019年   61篇
  2018年   63篇
  2017年   74篇
  2016年   77篇
  2015年   78篇
  2014年   92篇
  2013年   64篇
  2012年   94篇
  2011年   97篇
  2010年   77篇
  2009年   83篇
  2008年   84篇
  2007年   87篇
  2006年   75篇
  2005年   53篇
  2004年   56篇
  2003年   52篇
  2002年   46篇
  2001年   42篇
  2000年   44篇
  1999年   31篇
  1998年   30篇
  1997年   28篇
  1996年   41篇
  1995年   32篇
  1994年   44篇
  1993年   32篇
  1992年   23篇
  1991年   31篇
  1990年   21篇
  1989年   19篇
  1988年   21篇
  1987年   10篇
  1986年   5篇
排序方式: 共有1950条查询结果,搜索用时 15 毫秒
1.
针对低轨(low earth orbit,LEO)Walker星座构型稳定性维持问题,分析了低轨卫星的轨道摄动和星座构型稳定性的影响因素。通过分析低轨Walker星座的轨道摄动和相对漂移特点,提出了两次偏置策略。首先,依据未偏置时星座相对漂移量拟合得出第一次偏置时的偏置量。然后利用第一次偏置后的相对漂移量拟合得出第二次偏置量,消除残余项影响。两次偏置量叠加,使相对漂移大大降低。结果表明,低轨Walker星座中各卫星的初始参数偏差造成了升交点赤经和沿迹角相对漂移的发散,两次偏置策略可将两种星座的相对漂移量降至0.1°以下,证明了策略的有效性,提高了星座构型稳定性。  相似文献   
2.
基于民机的适航要求,建立了一种基于数字虚拟飞行的侧风着陆地面航向操稳特性评估方法。以着陆滑跑过程中最大机体倾斜角和最大航迹偏移量作为评估的关键参数,依据人机闭环数字飞行仿真计算结果,评估了某大型水陆两栖飞机侧风着陆任务的地面航向操稳特性适航符合性。对于20 kts侧风分量,算例飞机着陆滑跑的机身最大机体倾斜角为3.44°,最大侧向航迹偏差为2.51 m,能够满足适航要求。进一步研究表明,侧风分量大小、道面污染情况均影响侧风着陆的安全性。在干道面上当侧风分量超过30 kts时即会出现地面打转现象;道面污染增加滑跑减速所消耗的跑道长度,同时不利于驾驶员对滑行航向的控制。所提评估方法可应用于民机的概念和方案设计阶段,并为后续开展飞行试验验证等提供理论参考。  相似文献   
3.
Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.  相似文献   
4.
陈冲冲  曾凡  王毅飞  樊虎  张进 《遥测遥控》2021,42(4):112-118
针对谐振式加速度计成品率不高、精度低等问题,以石英振梁加速度计为例,采用引进标准信号,将谐振电路作为“黑盒子”,对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标,与加速度计实际指标建立了一一对应的关系,为加速度计研制与性能提升提供了有效依据。实际运用表明,电路噪声性能、温度性能大幅提升,产品成品率从70%提高到了约90%。  相似文献   
5.
使用数值模拟方法研究了前缘缝翼翼型气动特性,并将该前缘缝翼翼型应用于直升机平尾,分析了该直升机全机气动特性,最后通过风洞试验对数值模拟结果进行验证。结果表明,前缘缝翼构型平尾能有效改善直升机的纵向静稳定性。  相似文献   
6.
《中国航空学报》2021,34(5):523-534
Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.  相似文献   
7.
为解决发动机点火包线小于飞行包线的实际问题,提供等离子体点火技术在航空发动机中的工程应用新思路,论文设计了一种预燃式等离子体射流点火器,实验研究了放电特性和射流特性。结果表明,预燃式等离子体射流点火器与空气等离子体射流点火器相比,在提升射流能量降低电源功率方面有着较大的优势,电流相同时通入甲烷在较大流量时可减小驱动电源功率,总流量为44L/min时,减幅可达14.99%;同时预燃式等离子体射流较空气等离子体射流稳定,且射流长度增加,扩大了点火面积,有利于点火。  相似文献   
8.
基于稳态火焰面(SLFM)和交互式非稳态欧拉颗粒火焰面(EPFM)模型对Sydney大学CH4/H2钝体稳定湍流扩散火焰行了数值研究,采用修正的雷诺应力模型(RSM),同时对两种不同规模的甲烷详细化学反应动力学机理进行研究,比较了燃烧模型和反应机理对湍流火焰结构、活性自由基以及氮氧化物预测精度的影响,与实验数据对比结果表明:两种反应机理得到的温度场和主要组分分布基本相同;SLFM模型能对速度场和标量场的分布进行较为准确预测,采用EPFM模型修正后,部分区域OH预测结果更加靠近实验结果;采用EPFM模型对SLFM模型耦合GRI-Mech 211的计算结果修正后,NO量级降低近2倍,预测精度明显改善,与实验结果实现较好的符合,验证了化学反应动力学机理以及非稳态效应对氮氧化物预测精度的影响。  相似文献   
9.
综合采取理论建模、高空自由落体试验及可视化仿真相结合的方法,研究了一种涡环伞降末敏子弹的稳态扫描动力学特性。基于第一类拉格朗日方程,建立了由弹体、降落伞、伞盘、摩擦盘、连杆所组成的五刚体动力学模型,并应用ADAMS、MATALB及VR相结合的方法进行了弹道计算和可视化仿真研究。通过在高空热气球上投放试验样弹的方法,得到了伞弹系统的运动图像、平均落速、转速等弹道数据。对比研究得出:涡环伞的运动稳定性良好,可使末敏子弹保持匀速旋转降落状态,弹体达到稳定后的落速约为13.5 m/s,转速约为3 r/s,稳态扫描角接近于弹体的静态悬挂角,仿真计算与试验结果的一致性较好。   相似文献   
10.
为了探究硼笼化合物对液固凝胶型高能燃料的点火及燃烧性能的影响,采用高密度碳氢燃料MCRI-1、辅助分散剂胶凝剂和纳米铝粉为原料,制备了系列含铝液固凝胶型高能燃料(简称含铝高能燃料),并考察了含铝高能燃料的组成对其分散稳定性(即凝胶成型效果)的影响。在此基础上,考察了三种硼笼化合物对含铝高能燃料的密度、热值、点火及燃烧性能的影响。结果表明,提高胶凝剂含量或固液质量比(Al/MCRI-1)均可提高含铝高能燃料的分散稳定性。含铝高能燃料的密度和体积热值随着硼笼化合物的添加略有降低,但其质量热值在添加硼笼T和硼笼A后分别增加了11.6%和12.4%。硼笼化合物可将含铝高能燃料的燃温峰值提高21.1%~52.9%,点火延迟缩短44.5%~65.2%。硼笼化合物明显改善了含铝高能燃料的点火及燃烧性能。整体上,硼笼A添加效果最佳,且热解及燃烧可产生较多的气体,一定程度上增强了含铝高能燃料的膨胀做工能力。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号