柔性支撑控制力矩陀螺动力学建模与控制

针对柔性支撑引起控制力矩陀螺(CMG)框架控制性能下降的问题，建立了柔性支撑条件下控制力矩陀螺的动力学模型，分析了柔性支撑扰动力矩的耦合机理并给出了解析模型.据此，设计了一种积分滑模控制策略，用于提升对CMG框架动力学特性变化和新增扰动力矩的鲁棒性.仿真结果表明，该控制策略相比传统的PID控制具有更好的动态过程和稳态性能，提升了柔性支撑下控制力矩陀螺框架速度的闭环控制性能.     

PMSM电流预测控制参数误差量化分析方法

交流永磁同步电机（PMSM）电流环控制性能是制约交流伺服系统性能的关键。电流预测控制拥有更快的动态响应、更低的电流谐波和优良的转矩响应，但该算法依赖精确的电机模型，参数失配会引发稳态电流误差，无法输出额定转矩，进而导致电机转矩输出效率降低。根据永磁同步电机电流预测模型，详细分析了d、q轴电流静差产生的原因，以及电流预测控制对电机参数误差的敏感性，提出了一种参数误差量化分析方法。该方法引入了电机参数偏差因子，量化描述了电机电感、磁链参数误差与电流静差之间的制约关系。通过仿真分析，验证了所提方法的合理性，为高性能永磁伺服电流预测数字控制技术打下了良好基础。     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

Propulsionless planar phasing of multiple satellites using deep reinforcement learning

This work creates a framework for solving highly non-linear satellite formation control problems by using model-free policy optimisation deep reinforcement learning (DRL) methods. This work considers, believed to be for the first time, DRL methods, such as advantage actor-critic method (A2C) and proximal policy optimisation (PPO), to solve the example satellite formation problem of propellantless planar phasing of multiple satellites. Three degree-of-freedom simulations, including a novel surrogate propagation model, are used to train the deep reinforcement learning agents. During training, the agents actuated their motion through cross-sectional area changes which altered the environmental accelerations acting on them. The DRL framework designed in this work successfully coordinated three spacecraft to achieve a propellantless planar phasing manoeuvre. This work has created a DRL framework that can be used to solve complex satellite formation flying problems, such as planar phasing of multiple satellites and in doing so provides key insights into achieving optimal and robust formation control using reinforcement learning.     

A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

弹载变转速定量泵高动态压力控制特性分析

传统弹载电液伺服系统的液压能源采用有刷直流电机驱动恒压变量泵的方式，泵源压力在导弹飞行过程中设定值恒定，但在平飞段过程长、负载小，对能源压力需求低，造成弹上能源总利用率不高的问题，提出无刷直流电机驱动小排量液压泵的压力控制泵源的设计，在低气动负载阶段适当降低系统压力，进而降低节流损失与泄漏量，提高能量利用率。分析了变转速定量泵的流量压力特性曲线，通过建立基于变转速压力控制泵源的位置电液伺服系统数学模型与仿真模型，分析了变转速定量泵压力控制系统在典型工况下的位置跟踪、系统压力变化与能量利用效率，验证了压力控制系统能够在导弹平飞段保证位置伺服系统跟踪正常的前提下，能有效提高系统效率，证明了变转速定量泵压力控制系统的有效性与可行性。     

蜂窝状薄壁管拉伸时的内陷分析

蜂窝材料因具备广阔的结构设计空间,已广泛应用于航空航天等工业领域。探索蜂窝元胞的组织结构、组分性质与材料整体性能之间的关系有助于新型功能性材料的设计开发。本文从非平面Vertex模型的势能形式出发,结合蜂窝薄壁圆管拉伸时的轴对称特征,通过变分法得到了圆管拉伸时母线满足的控制方程,揭示了边界效应是蜂窝状薄壁圆管受拉时产生内陷的原因,并结合母线控制方程的若干特解,考察了非平面Vertex模型势能形式中包含的材料性质参数与圆管拉伸后内陷程度及范围的关系。研究还指出,蜂窝材料的材料性质包含在非平面Vertex模型的势能形式中,为蜂窝状材料整体性能的研究提供了一种新的思路。     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.     

宇航矢量伺服控制器在SiP中的设计与实现

磁场导向控制FOC（field-oriented control）矢量控制算法在伺服驱动控制系统中一般由CPU或DSP实现，难以满足航天应用中实时性较高场景下的需求。为提高宇航电机系统控制的实时性与可靠性，从FOC矢量控制算法的硬件加速角度出发，详细介绍了伺服控制器的设计，给出了一种全数字、高性能的伺服控制器硬件加速设计方案，并在具有可编程逻辑功能的宇航级SiP6117S芯片上进行了验证。仿真实验表明，相比于前人的设计，通过调整观测数据的量化精度来降低硬件加速过程中的处理延时，能有效改善多级流水延迟并在一定程度上提升算法的实时性。     

并联机器人运动性能的研究现状及发展趋势

随着并联机器人技术的发展,其运动性能的提升成为了发展需求,指出了研究工作空间和奇异位形的必要性。以研究方法为主线,详细阐述了工作空间和奇异位形的国内外研究现状及特点,进一步提炼出个体的创新思想和面临的共同难题。通过深入分析研究方法的原理,找到了解决共同难题的突破口,同时剖析了研究中的尚存难题。结合未来的发展趋势,从结构综合和理论创新两个方面进行突破,能够为并联机器人的发展提供强劲动力。得出的结论和展望给从事这一领域的研究者们提供了参考。