基于自适应网格的钝头体激波诱导燃烧现象数值模拟研究

钝头体激波诱导燃烧是爆震研究的一个基本问题。针对化学恰当量比的H2/Air预混气在Ma=4.79和Ma=6.46时的激波诱导燃烧现象开展数值模拟研究，采用基于有限体积法的块结构自适应网格加密程序AMROC对带化学反应源项的轴对称Euler方程解耦求解，考察了数值模拟中不同形式的MUSCL重构格式、限制器类型以及化学反应机理等重要因素对模拟结果的影响。结果表明，程序能够根据设定的加密判据较好地实现网格自适应加密，减小总网格量，实现高效数值模拟。通过与实验数据的对比，表明非定常激波诱导燃烧算例的准确程度不仅取决于化学反应机理，也取决于限制器类型，而采用两种不同形式的MUSCL重构格式获得的振荡频率则几乎一致，与试验结果的误差分别为1.17%和0.97%。模拟对比经典的Jachimowski机理和近年来新发展的几种包含压力相关反应步的氢/氧反应机理，模拟结果表明：对于Ma=4.79时的非定常激波诱导燃烧模拟，经典的Jachimowski机理仍然是能够给出与实验结果最接近的反应机理；而对于Ma=6.46时的定常激波诱导燃烧模拟，几种反应机理均能给出与实验吻合较好的结果。     

不同直径圆球诱导燃烧的振荡机制与频率特性

为了分析不同直径圆球诱导振荡燃烧的规律，并揭示圆球大小在振荡燃烧现象中所发挥的深层次作用，本文采用二维轴对称Euler方程和基元反应模型，对不同直径的圆球在H2/air预混气体中诱导振荡燃烧的现象开展数值模拟研究。研究发现，振荡频率并不是简单地随直径增大而逐渐从高频向低频连续过渡，而是存在两次突变，形成了超高频、高频以及低频三种振荡燃烧模态。在两种模态间过渡时，振荡达到稳定状态前，会存在一段双频耦合的振荡阶段。三种不同振荡燃烧模态的产生是受到了不同振荡机制的作用，而两种模态间过渡时的双频耦合现象则是两种机制相互竞争的结果。     

Daytime VHF amplitude scintillations recorded at an Indian low-latitude station,Waltair (17.7°N, 83.3°E) during 1997–2003

In this research, it is presented the daytime amplitude scintillations recorded at VHF frequency (244 MHz) at an Indian low-latitude station, Waltair (17.7°N, 83.3°E) during seven continuous years (1997–2003). Contrary to the nighttime scintillation seasonal trends, the occurrence of daytime scintillations maximizes during summer followed by winter and the equinox seasons. The fade depths, scintillation indices and the patch durations of daytime scintillations are meager when compared with their nighttime counterparts. A co-located digital high frequency (HF) ionosonde radar confirms the presence of sporadic (Es) layers when daytime scintillations are observed. The presence of daytime scintillations is evident when the critical frequency of the Es-layer (foEs) is ≥4 MHz and Es-layers are characterized by a highly diffuse range spread Es echoes as can be seen on ionograms. It is surmised that the gradient drift instability (GDI) seems to be the possible mechanism for the generation of these daytime scintillations. It is quite likely that the spread Es-F-layer coupling is done through polarization electric fields (Ep) that develop inside the destabilized patches of sporadic E layers, which are mapped up to the F region along the field lines as to initiate the daytime scintillations through the GDI mechanism. Further, the presence of additional stratification of ionosphere F-layer, popularly known as the F3-layer, is observed on ionograms once the Es-layers and daytime scintillations are ceased.     

燃烧室头部激励的等离子体强化燃烧特性实验研究

等离子体助燃是一种新型的强化燃烧技术，近年来受到国内外学者的广泛关注。本文开创性地研制了基于旋转滑动弧等离子体的强化燃烧头部，建立了某型航空发动机三头部燃烧室实验件的等离子体助燃实验平台，验证了该等离子体强化燃烧技术应用于型号发动机燃烧室的可行性。实验研究等离子体助燃在不同余气系数和不同输入电压条件下对平均出口温度、燃烧效率、温度分布系数以及熄火边界的影响。实验结果表明，与正常燃烧相比，施加等离子体助燃后的燃烧效率有明显的提高，在输入电压为U0=240V，余气系数为 α=0.8时，等离子体助燃的燃烧效率提高3.24%。实施等离子体助燃后，燃烧室出口温度分布场分布得到明显的改善，在富油工况α=0.8，出口温度分布系数减少39.8%。等离子体助燃输入电压越高熄火边界扩展程度越明显，相比于正常工况条件下，等离子体助燃U0=240V的熄火边界扩宽了7.34%。     

Two-stream instability generation in the lunar ionosphere

The Two-stream Instability (TSI) generation is studied analytically in the lunar ionosphere. The TSI is a tiny perturbation in the electron plasma density, due to which an electric field grows with time and this growth is facilitated by the electron plasma in the background. In lunar ionosphere, the TSI comes into existence when the solar wind interacts unhindered with the tenuous lunar electron plasma in the surface bound exosphere. In this study, the conditions which allow the TSI to form and the subsequent instability growth with time i.e. the growth factor, is estimated. Initially, the threshold condition for the TSI to take place is determined. Thereafter, the solar wind and lunar plasma parameter contribution to trigger TSI is investigated along with the effect of these parameters in the evolution of TSI. The plasma TSI evolution with the passage of time is also depicted in phase space diagram with Particle-In-Cell simulations.     

同轴离心式喷嘴热声不稳定性递归分析

为获得同轴离心式喷嘴燃烧动力学特性，开展了喷注单元稳定性试验研究。试验中燃料流量不变，随氧化剂流量增加，热声系统依次经历了燃烧噪声状态、阵发状态和准周期振荡状态。采用递归方法对实验结果进行分析。首先，利用交互信息法和虚假最邻近法分别求解最优延迟时间和嵌入维数，获得了典型工况下的相空间轨迹图。其次，递归图分析表明系统出现了第II类阵发现象，意味着系统发生了亚临界Hopf分叉，与实验结果一致。最后，递归量化分析表明，确定率可以将阵发状态和准周期振荡状态与燃烧噪声状态区分出来，并可以对热声振荡进行预报。     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

等离子体助燃下超燃支板燃烧室燃烧特性数值研究

为了将支板喷注器与等离子体射流这两种促进超声速燃烧室燃烧的方式结合起来,设计了一种带有等离子体射流喷孔的支板燃烧室,并在超声速来流的条件下,针对燃料喷注总压、燃料喷注位置、等离子体射流介质、等离子体射流总压对燃烧室燃烧性能的影响进行了三维数值模拟。研究发现:增大燃料的喷注总压,燃烧室的燃烧范围明显增大,燃烧效率呈现出先增大后减小的趋势,在燃料喷注总压为2.0MPa时,燃烧效率达到最大值90.4%;不同的燃料喷注位置对燃烧室的燃烧范围影响较小;等离子体射流介质为O2时,燃烧效率最高,燃烧范围最广;提高等离子体射流的喷注总压,能够提升凹腔剪切层高度,有效促进燃烧,但同时也带来了更高的总压损失。     

小型回流燃烧室多工况碳黑分布预测

为了研究小型回流燃烧室不同条件下的工作状态,并分析其产生积碳现象的原因,采用k-ε湍流模型、EDC湍流燃烧等模型对该燃烧室多个工况进行数值计算。结果表明,燃烧室性能参数计算值与台架数据较吻合,各个状态下参数相对误差均小于1.37%。根据各工况的温度分布的变化,发现燃烧室火焰随工况降低逐渐向火焰筒头部收缩。计算了各工况蒸发管内的燃油蒸发率,发现蒸发率在低工况时明显降低。根据出口温度分布情况,计算出口温度分布系数OTDF为0.35。分析碳黑粒子的分布,发现积碳现象主要在火焰筒头部,其原因主要是燃烧不充分和冷却气膜的缺失。     

低排放燃烧室NO_x排放试验及预测方法研究

为了研究中心分级贫油低排放燃烧室的排放特性和排放预测方法,针对一个低排放头部方案,在单头部燃烧室试验件上,在不同的温度、压力、油气比、供油模式和分级比条件下,测量其排放性能。以Lefebvre排放经验预测公式为基础,采用经验分析方法拟合排放试验数据,归纳出适用于本头部方案的排放预测公式。表征预测好坏的判定系数R2在小工况下和大工况下分别为0.95和0.93,表明预测结果与试验结果符合度较好。小工况和大工况排放特性不同,对仅预燃级喷油的小工况工作模式,NO_x排放主要受化学恰当燃烧温度和预燃级局部当量比的影响;对预燃级和主燃级同时喷油的大工况工作模式,NO_x排放主要受燃烧区温度和主燃级燃油比例的影响。