首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   982篇
  免费   254篇
  国内免费   208篇
航空   1024篇
航天技术   127篇
综合类   177篇
航天   116篇
  2023年   26篇
  2022年   46篇
  2021年   52篇
  2020年   52篇
  2019年   55篇
  2018年   62篇
  2017年   77篇
  2016年   79篇
  2015年   59篇
  2014年   80篇
  2013年   46篇
  2012年   85篇
  2011年   95篇
  2010年   81篇
  2009年   76篇
  2008年   49篇
  2007年   70篇
  2006年   56篇
  2005年   45篇
  2004年   44篇
  2003年   33篇
  2002年   28篇
  2001年   17篇
  2000年   21篇
  1999年   10篇
  1998年   13篇
  1997年   10篇
  1996年   12篇
  1995年   7篇
  1994年   13篇
  1993年   10篇
  1992年   16篇
  1991年   6篇
  1990年   6篇
  1989年   3篇
  1988年   4篇
排序方式: 共有1444条查询结果,搜索用时 15 毫秒
1.
李增聪  陈燕  李红庆  田阔  王刚  高峰  王博 《航空学报》2021,42(9):224616-224616
为了提高航天器回转曲面加筋型连接结构的集中力扩散效率,需要开展回转曲面加筋集中力扩散结构设计。传统放射肋设计方法普遍依赖设计经验、难以满足集中力高效扩散需求。因此,提出一种面向集中力扩散的回转曲面加筋拓扑优化方法。第1步,建立了一种基于各向异性过滤技术的集中力扩散拓扑优化方法,保证拓扑优化结果满足回转曲面加筋制造工艺要求;第2步,提出了一种基于网格变形技术的拓扑优化结果智能重构方法,可高效准确地对回转曲面加筋拓扑优化结果进行模型自动重构。基于所提出方法,以卫星平台对接环这种典型的回转曲面加筋壳为对象开展算例研究,并将优化结果与传统放射肋设计结果进行对比。结果表明,所提出的优化方法可得到加筋构型清晰、满足回转曲面加筋制造工艺要求的优化结果,且具有集中力扩散效率高、网格质量依赖性低、拓扑特征重构高效等优点。  相似文献   
2.
《中国航空学报》2021,34(2):576-585
Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.  相似文献   
3.
《中国航空学报》2021,34(4):253-264
In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force PU was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.  相似文献   
4.
针对硬质合金刀具高速内冷铣削AISI304不锈钢时,切削力大、切削温度高及加工表面质量低的问题。基于响应曲面中心复合设计方法进行高速内冷铣削实验,建立了铣削力分量二阶回归预测模型,并进行了实验验证。对比了干式与内冷铣削后的加工表面质量,分析了铣削参数对铣削力分量的影响规律,以铣削力分量最小为目标优化了铣削参数。结果表明:进给力和径向力的预测值与实验值的误差分别为4. 77%和6. 16%;内冷铣削的Ra为0. 193~0. 327μm;对铣削力分量的影响是铣削深度转速进给量,随着铣削深度和转速的增加,进给力先升高后降低,径向力逐步增加,铣削深度与转速的交互作用对进给力和径向力的影响显著;转速11 643. 63 r/min、铣削深度1 mm、进给量0. 08 mm/r为最优铣削参数组合。  相似文献   
5.
为了快速准确地计算卡箍管路系统的振动响应,提出了基于测试数据的卡箍非线性等效建模方法。对卡箍直管系统进行低幅值激励的模态测试,利用试验数据对有限元模型进行修正,识别卡箍线性刚度、线性阻尼参数。对卡箍直管系统开展不同激励水平下的恒力测试,通过样条插值多项式法将恒力频响函数转换为恒位移、恒速度频响函数,并进一步识别卡箍非线性等效刚度、非线性等效阻尼,建立了考虑卡箍非线性的等效动力学模型。研究表明:该卡箍等效动力学模型的预测频响函数与试验频响函数的最大误差仅为-6.9%,可以有效地反映卡箍实际的刚度、阻尼特性,对解决卡箍管路系统的振动响应分析具有重要的指导意义。   相似文献   
6.
《中国航空学报》2020,33(10):2794-2806
The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.  相似文献   
7.
减压腔宽度对刷式密封泄漏特性和滞后效应的影响   总被引:1,自引:0,他引:1  
对减压腔轴向宽度分别为0、04 mm和06 mm的基本型和两种低滞后刷式密封结构进行了静态和动态下压差升降和转子转速升降循环试验,并对其泄漏特性和滞后效应进行了研究。研究结果表明:压差大于02 MPa后,同一压差下的动态泄漏系数比静态降低约14%~20%;低滞后结构的密封性能优于基本型,其泄漏系数最高比基本型降低约20%;静态压差升降循环中,减压腔轴向宽度为06 mm的低滞后结构的滞后效应最强;动态的压差升降循环中,基本型结构的滞后效应最强。转子转速升降循环前后,w为06 mm结构泄漏系数减小约15%,滞后效应最强,减压腔轴向宽度为04 mm结构几乎不存在滞后效应;三种结构中,减压腔轴向宽度为04 mm的结构密封性能最优,滞后效应也最弱。  相似文献   
8.
直线模拟加载系统是一种用于在实验室条件下模拟承载对象工作时所受直线负载力的半实物仿真系统,可用于模拟各类飞行器关键部件在工作过程中所受的气体阻力载荷。针对目前常用的机械式、电液式和电动式直线模拟加载系统,分析其基本加载原理和研究进展,结合自行研制的电动式直线模拟加载系统进行了深入探讨。针对多余力抑制方法的关键问题,详细论述了直线负载模拟器的结构补偿方法和控制策略。最后,展望了直线模拟加载系统的发展趋势,归纳了电动式直线模拟加载系统的高精度、大载荷发展方向。  相似文献   
9.
反推力装置运动学与动力学仿真   总被引:1,自引:1,他引:0  
陈永琴  何杰  苏三买 《航空动力学报》2019,34(11):2316-2323
为了研究叶栅式反推力装置各部件在工作过程中的运动学与动力学特性,根据机构运动原理对反推力装置进行简化并建立了运动学与动力学数学模型。以滑动整流罩位移与阻流门所受气动负荷为输入进行运动学与动力学仿真,得到了反推力装置各部件的位移、速度及受力特性曲线,并对比分析了在不同尺寸参数下各部件特征点的运动轨迹和反推力装置负载力变化。结果表明:运动学及动力学仿真结果与工程实际相符;反推力装置机构参数选择不合理时,各设计点会发生干涉现象并导致机构无法运动;机构参数变化对负载力最大值影响尤为突出,在阻流门AC段长度值增大6%,阻流门CB段长度值减小9%的情况下,负载力正向最大值将增大19.53%,负向最大值增大12.67%。研究方法及研究结果可为反推力装置运动学及动力学分析,以及为反推力装置机构优化设计提供参考。   相似文献   
10.
使用自行开发的非定常流固耦合数值模拟程序,研究了上游叶排影响转子叶片颤振特性的机理,采用影响系数法分析轴向间距影响转子气动弹性稳定性的规律。结果表明:在协调叶栅中,叶片吸力面相邻的叶片振动对转子叶片气动阻尼的大小起决定性作用,其影响甚至超过振动叶片本身的影响;多排环境中,导叶(IGV)对转子叶片气动阻尼最小值的影响最大,并使其对应的节径增大;相邻叶片振动引起的通道变化抑制了导叶对非定常压力波的反射作用;随着轴向间距的减小,导叶对非定常压力波的反射作用减弱了非定常压力波的周向衰减,从而增大了叶片振动的非定常影响范围;在多排环境中使用影响系数法需要测量更多的叶片才能得到较为准确的气动阻尼。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号