浅谈波音737NG飞机APU滑油系统一项监控指标在故障监控中的应用

波音737NG飞机APU故障影响航班运行,而APU滑油系统是其安全运行的重要保障,大多数APU的故障都能够从滑油系统的监控指标中找到故障征兆。本文基于737NG飞机APU滑油系统工作原理,提出了一项APU滑油系统的监控指标——温升速率,并利用该指标总结排故方法进行重点故障的监控,有效地提高了排故效率。     

不同密度弹丸对水冰的超高速撞击成坑实验

为了研究冰冻天体表面撞击坑的形成与演化，开展了水冰的超高速撞击成坑实验。使用二级轻气炮发射1.0 mm直径的球形弹丸，以3 km/s、5 km/s和7 km/s速度对圆柱状冰块进行撞击。弹丸材料包括聚碳酸酯和不锈钢两种，冰块温度为253 K。实验观察到了不同弹丸和不同速度条件下，冰块中撞击坑的形貌特征。对撞击坑直径、深度和剖面形状进行了测量，并与文献中铝弹丸对水冰的撞击坑进行了比较分析。获得了水冰撞击坑特征随撞击参数的变化规律，结果表明：撞击坑直径和深度的主导机制不同，坑深主要由弹丸侵彻作用形成，而坑径主要由冰块的剥落所致；坑深比坑径具有更强的对于弹丸密度的依赖性，高密度弹丸撞击坑直径具有比低密度弹丸更强的对于撞击速度的依赖性；撞击坑体积与撞击能量成正比，高密度弹丸形成的撞击坑直径表现出“能量缩比”行为，而低密度弹丸形成的撞击坑直径表现出“动量缩比”行为。     

A robust object-based shadow detection method for cloud-free high resolution satellite images over urban areas and water bodies

Unwanted contrast in high resolution satellite images such as shadow areas directly affects the result of further processing in urban remote sensing images. Detecting and finding the precise position of shadows is critical in different remote sensing processing chains such as change detection, image classification and digital elevation model generation from stereo images. The spectral similarity between shadow areas, water bodies, and some dark asphalt roads makes the development of robust shadow detection algorithms challenging. In addition, most of the existing methods work on pixel-level and neglect the contextual information contained in neighboring pixels. In this paper, a new object-based shadow detection framework is introduced. In the proposed method a pixel-level shadow mask is built by extending established thresholding methods with a new C₄ index which enables to solve the ambiguity of shadow and water bodies. Then the pixel-based results are further processed in an object-based majority analysis to detect the final shadow objects. Four different high resolution satellite images are used to validate this new approach. The result shows the superiority of the proposed method over some state-of-the-art shadow detection method with an average of 96% in F-measure.     

滤波减速器有限长轮齿接触表面混合润滑分析

综合考虑了轮齿接触几何、啮合点法向载荷、齿向参数、真实表面粗糙度、润滑剂流变特性等因素,建立了滤波减速器轮齿混合润滑数值分析模型,采用复合迭代法和快速傅里叶变换(FFT)方法分别求解Reynolds方程和弹性变形方程,获得了轮齿接触表面混合润滑分析完全数值解,得到了滤波减速器在啮入点、节点和啮出点的压力与平均油膜厚度,以及转速对轮齿接触表面平均油膜厚度和接触比的影响.结果表明:在啮入点、啮出点及节点处,沿齿宽方向的压力分布不相等,两侧压力较大,而在啮入点处的两侧压力突变相对较小,且平均油膜厚度最大;对于粗糙轮齿接触表面,随着滤波减速器转速逐渐降低,啮入点、节点及啮出点的平均油膜厚度随之减小,接触比增加,润滑效果变差,并且在同一工况下粗糙轮齿接触表面的啮合点平均油膜厚度小于光滑轮齿表面的平均油膜厚度.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。     

Wireless Sensor Networks – A potential tool to probe for water on Moon

A Wireless Sensor Network for in situ probing of lunar water/ice is proposed. The mission scenario in single and multi-tier architectures for probing water in a permanently shadowed region of the Moon and different scenarios of exploration are discussed. The ideas presented in the paper are a positive assertion of feasibility for the sensor node hardware, given current levels of technological advancements.     

气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

非牛顿大滑滚比工况的斜齿轮热摩擦特性分析

考虑啮合过程中接触线长度及齿面载荷的时变性，结合沿接触线方向综合曲率半径及卷吸速度的瞬态特点，建立满足航空传动润滑剂非牛顿流体及大滑滚比工况的有限长线接触斜齿轮热弹流润滑(TEHL)模型。采用多重网格法及逐列扫描法，获得适用于宽泛工况范围的斜齿轮热弹流润滑完全数值解；分析非牛顿及大滑滚比情形下的斜齿轮传动热摩擦特性。结果表明:斜齿轮端部存在明显压力及温度尖峰，且离入口愈近膜厚会略减小；非牛顿特性对温度场影响显著，且接触线过节点时温度分布呈“V”型分布；摩擦因数沿啮合线方向在节点处接近于0且向两侧逐渐增大，同时随滑滚比的增大而增大。