旋翼减摆自润滑衬套疲劳试验温度设计与控制

以高分子材料自润滑衬套为研究对象，其摩擦阻尼为旋翼摆振铰提供减摆阻尼，在直升机飞行时，摆振铰作周期摆振运动，产生大量的热，引起衬套温度升高，易造成摆振自润滑衬套阻尼值剧烈变化。通过建立旋翼支臂摆振铰自润滑衬套摩擦生热模型，计算了摆振铰摩擦总热流量，按摩擦副接触面最高温度相等假设计算热流量分配。对传热过程应用有限元稳态热进行求解，获得了直升机旋翼运转时摆振铰摩擦副的温度分布，再进行自润滑衬套疲劳耐久性试验装置水冷散热等同性分析，最终确定了试验装置控制温度参数，为旋翼摆振铰自润滑衬套疲劳耐久性考核试验设计和验证提供参数。     

径向孔形状对针栓式喷注器液膜下漏率的影响

为了研究径向孔形状对针栓式喷注器液膜下漏率的影响并对其进行准确预估，以径向圆孔液束的相对变形模型为基础，通过类比分析提出了矩形孔的相对变形理论模型，并考虑多喷注单元间相互影响和不同高宽比矩形孔的绕流侧边效应，首次建立了径向矩形孔的下漏率模型。通过试验及数值仿真对模型进行了验证分析，结果表明理论预估结果与数值仿真及试验结果吻合较好，也表明针对矩形孔建立的相对变形模型及下漏率模型具有较好的准确性。另外，研究表明矩形孔的下漏率除了与几何阻塞率、有效动量比及液膜厚度与液束孔宽度之比有关外，还与高宽比有关；3种不同高宽比情况下的下漏率均显著小于几何下漏率；同时下漏率随有效动量比增大而增大的趋势均较平缓。综合分析径向圆孔和3种不同高宽比矩形孔的结果发现，在径向孔横截面积及流量等工况参数完全相同的情况下，径向孔形状对下漏率有显著的影响，矩形孔的下漏率显著低于圆形孔的；矩形孔的高宽比越大，下漏率越大。实际应用中选择矩形孔更有利于控制下漏率，并可通过改变高宽比控制下漏率；同时在变工况过程中，矩形孔的下漏流量也会随着主路推进剂一起调节变化，保持下漏率变化不大，故具有较好的大范围变推力流量匹配特性。     

Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force P_U was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.     

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.     

基于PNFM-LFM复合调制的探测干扰共享波形设计

针对雷达-电子战一体化共享信号波形的设计需求，提出一种伪码噪声调频与线性调频复合调制的探测干扰共享波形。在伪码序列的伪随机性和规律性上，通过理论推导和仿真实验，分析并验证了该探测干扰共享波形具有良好的模糊函数以及线性可控的频谱特征，有效通带内干扰功率利用率平均可达38%；通过探测干扰共享信号的相关信号处理，本地接收机能够成功地对信噪比不低于-27 dB的回波信号进行检测，且改善因子可达30 dB。     

Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

偏心撞击对撞击式喷嘴雾化特性的影响

为研究偏心撞击对撞击式喷嘴雾化特性的影响,建立了求解自燃推进剂冷态射流撞击雾化过程的数值模拟方案,计算了不同偏心度条件下的射流撞击雾化过程。采用树形自适应加密算法直接求解不可压Navier-Stokes方程组,由分段线性的流体体积(VOF)方法对流体界面进行捕捉。结果表明偏心撞击会导致雾场发生偏转,当无量纲偏心度E为1/8时,雾场偏转角度约为9.2°,应控制加工偏差小于该值。随着偏心度的增大,液膜的偏转角度增大,理论推导得到的液膜偏转角度要小于数值计算得到的液膜偏转角度。正心撞击时燃料与氧化剂流强峰值接近,雾场的流强分布呈单峰分布。当发生偏心撞击时,由于燃料与氧化剂部分射流未参与撞击导致流强峰值出现交错,雾场的流强分布呈双峰分布,混合比的空间分布发生较大改变。正心撞击时撞击点下游液滴的速度分布近似呈轴对称分布,而偏心撞击之后的速度分布则呈中心对称分布。偏心撞击导致的射流动量损失使得雾化性能变差,当无量纲偏心度E为1/8时,一甲基肼(MMH)的Sauter平均直径增大约4.8%,四氧化二氮(NTO)的Sauter平均直径增大约5.8%。      

地外人工光合成装置研制与试验

原位资源利用技术是地外生命保障体系构建、实现人类地外生存的有效途径，是载人深空探索的核心技术。基于微通道技术的人工光合成反应器，采用流动反应器设计，用于低微重力等特殊环境条件下模拟人工光合作用，实现CO２向O２和含碳燃料的转化。微通道芯片通过气液剪切作用力使气体反应产物快速脱离电极表面并随反应介质排出反应器，理论上可以克服微重力条件对反应过程的影响，尚需进行微重力试验进行验证。同时，微通道结构可以通过精确控制反应气液的压力、流速、流量比等反应条件，获得优化的反应条件。通过地面试验，验证了该反应器将CO２还原为O２和含碳化合物的功能可行性。以Au和Ir/C作为阴极和阳极材料，3V电压条件下，O２产率可达11.74mL/h。此外，基于人工光合成反应器搭建了集反应模块、控制模块、流路驱动模块以及检测模块等于一体的地外人工光合成装置，形成原位反应、介质供给、精确控制、在线收集和检测等功能一体化的系统，并实现CO２有效转换和O２供给。为后续技术成熟度更高的反应装置研制、高产物选择性的含碳化合物转化以及人工光合成反应装置在轨试验奠定了理论和实践基础。     

基于HHT的航空直流串行电弧特征提取方法

由于飞机内部布线空间有限、电弧故障存在发生时间地点随机以及特征不明显等问题，导致检测困难。本文基于航空270 V高压直流（HVDC）系统开展直流串行电弧故障特征提取方法研究，采用希尔伯特黄变换（HHT）提取电弧电流交流分量的时域和频域特征量。选择HHT的固有模态函数IMF5瞬时幅值的峰峰值和标准差作为识别电弧故障的时域特征，与原始信号中提取的时域特征量对比，正常和电弧特征量的区分度更大；选择HHT的固有模态函数IMF1+IMF2、一定频带范围内的瞬时幅值计算得到的谐波功率和作为区分正常和电弧情况的频域特征量。与常用的快速傅里叶变换（FFT）方法相比，HHT三维时频谱能够反映信号的局部特征，HHT方法计算得到的正常和电弧特征量之间的区分度更大，电弧和正常特征量的比值最高可达346。基于HHT的电弧故障特征提取方法能够更好地区分正常和电弧情况，有助于提高电弧故障的检测率，降低虚警率，具有重要的工程应用价值。