A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

航天先进轻合金材料及成形技术研究综述

轻合金是现代航天装备轻量化首选材料,高性能轻合金构件制造能力决定了我国航天装备的功能水平与竞争力。为推动先进轻合金材料及成形技术在航天领域的应用,对高性能轻合金材料、铸造、钣金成形、增材制造等技术领域在基础理论、工艺开发、装备研制、工程应用等方面的发展现状进行了梳理,提出了高强耐热铸造镁合金材料、高性能钛铝合金材料、高性能镁合金熔模精密铸造、数字化铸造、旋压成形、超塑成形、钛/铝合金电弧熔丝增材制造等相关技术的后续发展方向。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

小半径弯管弯胀复合成形研究

为解决小半径弯管内侧起皱、外侧减薄的成形缺陷,提出了一种弯胀复合成形的方法。通过几何关系解析了初始弯曲半径和初始管坯直径与最终管径和最终弯曲半径之间的关系,确定了初始弯曲半径的取值范围。采用有限元与实验相结合的方式研究了不同初始弯曲半径对零件壁厚分布的影响,分析了胀形过程中零件弯曲处及直壁处的变形规律。最终发现:初始弯曲半径越大,零件的最终减薄越小,胀形过程中弯曲处内外侧发生均匀减薄,直壁处内侧减薄明显大于外侧减薄。     

各向同性热解炭材料中的缺陷分析和超声检测技术

利用偏光金相显微镜和超声探伤仪对高性能机械密封用块体各向同性热解炭材料中的缺陷进行表征和无损检测.偏光显微观察发现,各向同性热解炭材料中的主要缺陷主要包括三种:各向异性夹杂、裂纹和各向同性夹杂.超声实验研究表明,利用脉冲反射法超声波检测技术可有效检出各向同性热解炭制件中存在的上述缺陷.目前该技术已成功地用于各向同性热解...     

材料加工技术在低碳经济中的应用及发展

介绍了低碳经济形势下的薄坯铸轧、精密成形加工、闪光焊、无模成形、内高压成形以及其他先进成形加工技术,并展望了先进材料加工技术的发展趋势.     

复合材料粘接结构超声声谐振检测技术

分析了超声声谐振检测技术原理,采用该技术对编织石英/酚醛树脂复合材料粘接结构进行了检测技术研究.结果表明:采用所建立的超声声谐振检测装置,对于厚度为7和9 mm编织石英/酚醛树脂复合材料粘接结构可分别实现Ф10和Ф15 mm以上的脱粘缺陷检测.     

飞机框肋零件橡皮囊液压成形回弹研究综述

回弹是影响飞机框肋零件成形质量的主要因素之一,通过分析影响框肋零件回弹的主要因素,对框肋零件橡皮囊液压成形工艺的回弹预测及控制研究情况做了综述,并将预测方法归类为解析法、有限元法、人工神经网络法和试验法4种,最后总结分析了框肋零件橡皮囊成形零件回弹控制方法的发展方向.     

钛合金热成形和超塑成形金属平台材料选型和制备

介绍了钛合金热成形和超塑成形用金属平台的材料选型和制备工艺研究情况,研究认为,选择高温合金替代目前国外采用的耐热钢材料优势非常明显;钢铁研究总院自主开发的热成形金属平台制备工艺比国外相关技术更加先进,制备的K403高温合金热成形平台服役表现良好,具备了生产钦合金热成形和超塑成形金属平台的能力.     

模具约束条件对H96黄铜双脊矩形管E弯截面变形的影响

 双脊矩形管的绕弯成形受内外侧模具的共同约束,不同模具约束下管坯的受力不同,使得其截面变形情况也不相同,而截面变形严重地影响弯管件的成形质量和使用性能。因此,基于ABAQUS有限元平台建立了双脊矩形管E弯成形三维有限元模型,并通过实验验证了模型的可靠性。采用所建模型,研究了内外侧模具约束条件对双脊矩形管E弯截面变形的影响规律,发现当只有内腹板脊槽受约束时,内腹板脊槽的内缩变形可得到较好的控制,而其他部位的变形则有增大的趋势;当只有外腹板脊槽受约束时,内腹板脊槽宽度变形基本不发生变化,而其他部位的变形则有减小的趋势;当内外腹板脊槽均受约束时,可较好地控制双脊矩形管E弯过程中的截面变形。芯头个数对整管截面高度、宽度、外腹板脊槽宽度与两脊槽底部的间距的变形影响较大,但对内腹板脊槽宽度的变形影响不显著。