全文获取类型
收费全文 | 290篇 |
免费 | 126篇 |
国内免费 | 19篇 |
专业分类
航空 | 220篇 |
航天技术 | 136篇 |
综合类 | 9篇 |
航天 | 70篇 |
出版年
2023年 | 6篇 |
2022年 | 18篇 |
2021年 | 17篇 |
2020年 | 22篇 |
2019年 | 17篇 |
2018年 | 14篇 |
2017年 | 17篇 |
2016年 | 13篇 |
2015年 | 5篇 |
2014年 | 11篇 |
2013年 | 12篇 |
2012年 | 12篇 |
2011年 | 21篇 |
2010年 | 12篇 |
2009年 | 19篇 |
2008年 | 15篇 |
2007年 | 16篇 |
2006年 | 12篇 |
2005年 | 16篇 |
2004年 | 11篇 |
2003年 | 3篇 |
2002年 | 10篇 |
2001年 | 10篇 |
2000年 | 16篇 |
1999年 | 13篇 |
1998年 | 14篇 |
1997年 | 15篇 |
1996年 | 7篇 |
1995年 | 7篇 |
1994年 | 7篇 |
1993年 | 10篇 |
1992年 | 6篇 |
1991年 | 7篇 |
1990年 | 13篇 |
1989年 | 1篇 |
1988年 | 8篇 |
1987年 | 2篇 |
排序方式: 共有435条查询结果,搜索用时 15 毫秒
1.
2.
为了研究复合材料构件成型模具温度场,本文以某型飞机壁板的热压罐固化工艺为例,通过模型简化,利用FLUENT等仿真软件建立模具温度场的数值模拟模型,并将模拟数据与实验数据进行对比。结果表明二者平均相对误差为7. 4%。此外通过仿真模拟一组以支撑板厚度为变量的实例,两组以U、V两个方向的支撑板厚度为变量的对照组,通过判断模具型板表面温度方差大小,研究了支撑板厚度对模具温度场分布的影响规律。结果表明,模具温度场的均匀性随着支撑板厚度的增加而逐渐降低,其中U向支撑板厚度的变化对温度场均匀性的影响比V向大。 相似文献
3.
对激光通信终端在轨瞬态温度变化开展了仿真,以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化,建立终端的轨道热分析模型,准确模拟在轨机动,根据典型机动模式、外热流和涂层退化等因素设计了计算工况,得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明:不同机动模式下的温度变化存在差异,最大可达23.0℃,采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度,甚至不能部分替代二维转动热分析或热试验;光学天线和反射镜的温度控制是制约终端工作的瓶颈,为终端设计合适的避光机动策略,可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。 相似文献
4.
为对比不同形状接受孔的预旋系统内气流流动特性,通过数值模拟方法,对带有不同形状接受孔的预旋系统进行了研究。研究发现:收缩型接受孔入口截面气流流通面积较大,相对速度较小,在预旋系统中的性能最优,其次是类梯型,最后是直孔型。同一旋转雷诺数下,带收缩型接受孔的预旋系统无量纲温降较直孔型提高5.8%,总压损失系数降低3.0%。三种类型接受孔的预旋系统无量纲温降和总压损失系数均随进出口压比的增加而增大,在相同压比下,收缩型接受孔预旋系统无量纲温降最大,总压损失系数最小。 相似文献
5.
为了研究流动参数对涡轮导向叶片综合冷却效率的影响,采用红外热像仪对叶片表面的温度分布进行了测量,得到了叶片的综合冷却效率随流量比、温比、主流进口雷诺数和湍流度的变化规律。实验过程中,次流与主流的流量比分别为0.15,0.18,0.20,0.22和0.24;主次流温比分别为1.4,1.7,1.93和2.2;主流进口雷诺数分别为1.0×10~5,1.1×10~5,1.2×10~5,1.3×10~5和1.4×10~5;主流进口湍流度分别为0.506%,8.156%,14.92%。结果表明,综合冷却效率在前缘处最低,沿流向逐渐升高;增大流量比会显著提高叶片的综合冷却效率,在温比为1.93时,流量比由0.15增大至0.24,综合冷却效率平均增加29.3%;温比和主流进口湍流度的增大均不利于综合冷却效率的提升,流量比为0.20时,温比由1.4增大至2.2,综合冷却效率平均下降46.5%,湍流度由0.506%增大至14.92%,综合冷却效率平均降低15.5%;主流进口雷诺数对叶片综合冷却效率的影响很小。 相似文献
6.
7.
航空发动机主轴轴承温度场的精准预测对保证发动机润滑系统及整机稳定运转至关重要。针对传统热网络法精度低的问题,提出一种基于有限单元思想的有限单元热网络法。将轴承结构通过网格划分为有限个单元体,每个单元体设置一个温度节点代表该单元体的集总参数,节点间构建热阻关系并形成热网络,通过求解以温度为未知量的大型稀疏矩阵线性方程组来获得滚子轴承横截面的温度分布。该方法可以与轴承局部产热理论相结合,实现轴承局部产热的精准加载,完成温度场的精细化分析。通过与试验结果对比,本文方法对轴承外环表面中心线温度的预测结果与试验结果误差不超过13%。 相似文献
8.
《中国航空学报》2021,34(1):148-162
In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible. 相似文献
9.
10.