Effect of protrusion amount on gas ingestion of radial rim seal

In this paper, the effect of different amount of protrusion on various parameters in rotor–stator system was experimentally studied by measuring CO₂ concentration and pressure, in order to obtain the optimal protrusion amount. The parameters of different dimensionless sealing flow were measured under the condition that the annulus Reynolds number was 4.39 × 10⁵ and the rotating Reynolds number was 1.05 × 10⁶. The results show that the change of the amount of protrusions has little effect on the static pressure in the cavity, and the static pressure change near the sealing ring is almost negligible. But the total pressure and sealing efficiency increase first and then decrease with the increase of the amount of protrusion. The variation of power consumption is the same. A complex vortex structure will appear at the high radius region when the protrusion is installed. On the other hand, the protrusion can effectively reduce the minimum sealing flow of the rotor–stator cavity. Furthermore, considering the sealing efficiency and power consumption, the best range of the protrusion amount is about 36. The ratio near this range can optimally balance the alleviation of the gas ingestion and the reduction of the power consumption.     

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

A streamwise-body-force-model (SBFM) is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The val-idation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure perfor-mance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tun-nel test results. Results show that to reach the goal of rapid integrated simulation combining inter-nal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.     

翼身融合运输机分布式电推进系统设计及油耗评估

针对翼身融合运输机开展了分布式电推进系统的总体设计与油耗评估。通过数值计算完成了70t载质量翼身融合飞机的气动设计与优化。在巡航马赫数为0.80和10km高度的设计点,最大升阻比达到了24。通过求解积分边界层方程组,完成了电推进系统的总体设计。电推进系统包含10个推进风扇,风扇直径为1.45m，压比为1.35，巡航功率为2.94MW。建立了考虑燃烧过程的发动机一维性能模型,对发动机油耗进行了评估,获得了不同发动机循环参数下燃油消耗。建模结果表明,基于翼身融合布局和分布式电推进技术,可使运输机的油耗较C-17节省近50%。      

超临界碳氢燃料蒸汽重整一维模型研究

为了获得关键参数对超临界碳氢燃料蒸汽重整化学热沉分布特性的影响,建立了超临界碳氢燃料蒸汽重整非稳态一维计算模型,通过与实验数据的对比验证了模型的准确性,并基于该模型采用RP-3的四组分替代模型对RP-3蒸汽重整过程中入口流速、压力和含水量等关键参数对热沉沿流向分布特性的影响进行了研究。结果表明：随着入口流速的增加,蒸汽重整反应化学热沉的峰值减小,且出现峰值的位置逐渐向出口移动。随着压力的升高,相同位置处的化学热沉都减少,但是出现峰值的位置不变。在入口含水量由5%增大到12%的过程中,微通道同一位置处的化学热沉增大,且化学热沉的最大值也是增大的,峰值出现的位置向微通道出口移动。     

航空发动机进气及叶栅通道内砂粒动力学特性分析

为提高发动机的吞砂、防砂能力,需要了解砂粒在发动机中运动规律及对发动机性能的影响。采用欧拉-拉格朗日法对E3发动机整流罩、风扇和增压级进行了砂粒与气流的耦合作用分析计算,加入颗粒碰撞模型和侵蚀模型。仿真分析结果表明:砂粒运动轨迹和侵蚀区域符合发动机使用规律。砂粒进入发动机与风扇叶片压力面发生碰撞,砂粒发生碰撞后大部分进入了外涵流道。砂粒碰撞位置主要集中在风扇叶片压力面处,风扇对颗粒运动轨迹的影响最显著,碰撞后的颗粒有明显的径向运动趋势,叶顶区域的颗粒富集程度较高。整流罩、风扇叶片压力面及外机匣壁面都发生较为严重的砂粒侵蚀现象,而增压级叶片砂粒侵蚀现象不明显。      

分布式动力系统尾缘射流与边界层抽吸的数值分析

为研究带有边界层抽吸的分布式动力系统尾缘射流对机身气动性能及推进效率的影响,将机身简化为二维翼型,并加入尾缘射流及边界层抽吸的作用,利用数值模拟的手段来研究来流攻角、射流偏转角、边界层抽吸对推进效率及气动性能的影响,为分布式动力系统的设计与应用提供初步的建议.结果表明在中、小来流攻角(2°及0.6°)的情况下尾缘射流及边界层抽吸能够提高升阻比,推进效率可超过80%;而在大来流攻角(4°)情况下射流偏转角增大使翼型的阻力大幅上升,对气动性能和推进效率产生极为不利的影响.      

1.5级涡轮实验台前腔燃气入侵实验

在1.5级涡轮实验台上,针对不同转速和不同封严质量流量,分别采用稳态压力测量、瞬态压力测量和二氧化碳体积分数法对燃气入侵现象进行了实验研究,以确定不同工况下主流的动静叶相互作用对燃气入侵的影响以及入侵到盘腔的燃气在腔内与冷气的掺混过程.结果表明:静叶后的时均压力在周向有明显的周期分布,部分区域封严环外的压力高于腔内压力,且随着封严质量流量增加,这一区域逐渐缩小;动叶扫掠带来同频率的压力波动,对于燃气入侵的发生有着重要的影响;通过二氧化碳体积分数实验获得了最小封严质量流量,并得到在封严质量流量不足情况下燃气沿着静盘侧入侵盘腔的结果.      

GNSS single frequency ionospheric range delay corrections: NeQuick data ingestion technique

A study of the performance of the NeQuick model and the Klobuchar model for GNSS single frequency range delay correction on a global scale was done using data for moderate solar activity. In this study NeQuick was used in the way intended for Galileo. This study is to assess the performance of the two models at each ionospheric geographic region during moderate solar activity as previously published studies were concentrated only on high solar activity. The results obtained showed that NeQuick outperformed Klobuchar for the whole year at the three geographical regions of the ionosphere. In terms of monthly root mean square of mismodeling, NeQuick outperformed Klobuchar by 15 TECU or more at low-latitudes, 5 TEC or more at mid-latitudes, and 1 TECU or more at high-latitudes.     

运输类飞机动力装置溅水试验技术

基于对中国民用航空局（CAAC）运输类飞机适航标准和美国联邦航空管理局（FAA）咨询通告的分析、解读,分别从工程试验与适航验证两个方面,研究了溅水试验程序、试验水池方案设计与滑行速度测量与控制技术,制定了符合适航标准体系的运输类飞机动力装置溅水试验审定程序,以ARJ21-700型支线飞机合格审定试飞为平台,完整进行了相关试验验证。结果表明:所设计的溅水试验程序合理可行,能够完整地验证运输类飞机在机场跑道积水环境下动力装置对适航标准体系的符合性;试飞结果表明CF34-10A发动机配装ARJ21-700型飞机在机场积水环境下起飞构型临界滑行速度为166.6 km/h,发动机风扇、压气机及动力涡轮前温度最大波动值分别为5.1%、1.7%和39 ℃;在飞机着陆构型下,发动机慢车状态相对于最大反推力状态工作稳定性较好,能够满足适航标准规定;项目形成溅水试验程序和技术为后续C919、C929等运输类飞机动力装置相关试验提供了直接的支持。      

来流含水对航空发动机风扇/压气机特性的影响

结合大小水滴模型和由大量试验数据得到的损失和落后角模型,采用两相流理论与数值模拟的手段,在来流含水的状态下计算了某型发动机压缩系统的特性;分别研究了来流含水量、水滴尺寸等对压气机性能的影响。结果表明:进口气流中水的含量以及它存在形式均对压缩系统性能有不可忽视的影响,同时也验证了本文方法有效性和应用价值。