基于光场成像的快照式气膜孔三维测量技术

叶片气膜孔的几何参数对其冷却效率具有十分重要的影响，需采取有效手段对加工的气膜孔几何参数进行检测。基于光场成像原理，初步探索了单光场相机快照式三维测量技术在气膜孔检测上的应用。与其他光学测量技术相比，该技术仅通过一次拍摄，即可快速从捕获的单张原始光场图像中计算得到气膜孔的三维点云数据，其数据采集效率很高。实验中对一组标准量块进行了测量，展示了单光场相机应用于工业级精密测量的潜力。对实际叶片上气膜孔几何参数的检测结果初步表明了该技术应用于气膜孔三维测量的可能性。由于单光场相机成像系统的结构简单，易于操作且便于与其他传感器设备集成，可为气膜孔三维测量问题提供一种新的解决方案。     

Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.     

在平板不同位置开孔的剪切稳定性分析及应力集中影响

为满足管线通过、减重、维修等需求,通常需要在结构上开孔。基于Patran和Nastran软件,针对剪切载荷下的四边简支开孔矩形平板,对其在不同开孔位置下的稳定性及口边应力集中情况进行仿真分析,并整理仿真分析结果,得到不同开孔位置对矩形平板剪切稳定性和口边应力集中的影响,供结构开孔设计使用。     

地面燃气轮机单管燃烧室流量分配试验

对设计的100kW地面燃气轮机单管燃烧室空气流量分配进行了试验研究。在常压环境下采用堵孔法分别得到了旋流器、主燃孔和掺混孔的流量特性曲线，分析得到燃烧室不同结构的流量系数；试验研究了不同进口流量条件下燃烧室的流量分配，测量得到了燃烧室总压损失。研究发现:随着进口空气流量的增加，燃烧室的流量分配比例基本保持稳定，并且与燃烧室的设计空气比例基本吻合；随着燃烧室进口流量（雷诺数）的增加，旋流器、主燃孔和掺混孔的流量系数呈线性降低；随着进口流量（雷诺数）的增加，燃烧室总压损失逐渐增大；对主燃孔和掺混孔的流量特性测量中，两种测量方法得到的试验结果稍有差别，总体上看两种测量方法的试验结果较为接近。通过对比分析证明两种试验测量方法真实可靠，该研究结果可为100kW地面燃气轮机燃烧室的设计与优化提供依据。      

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

内孔结构对旋转空化发生器水力特性的影响

空化普遍存在于工业生产、舰船推进、航空航天等领域.使用高速相机对闭式循环试验台的旋转空化发生器内部流动进行试验观测，然后基于RNG k ε湍流模型和Zwart Gerber Belamri空化模型开展了旋转空化发生器流场的数值模拟.结果表明数值模拟结果与试验观测数据吻合较好，验证了本文数值模拟方法的准确性和可靠性.受离心力作用，转子孔内的压力从内径到外径逐渐增大.内孔底部由于轴向旋涡的作用，产生较大旋涡并耗散能量.内孔顶部流体与腔体区主流相互作用，在内孔顶侧产生碰撞并形成较小漩涡.不同内孔结构对旋转空化发生器的空化效果具有重要影响，在相同工况下椭圆形内孔的空化率小于圆锥形和圆柱形，说明型线光滑的内孔结构局部损失小，产生的空化较弱.不同内孔结构下，旋转空化发生器内部压力脉动的主频为转频fi或24fi(对应圆周方向开孔排数)，压力脉动最大幅值出现在进口管侧和出口管侧，主要原因是受动静干涉作用影响.     

飞机数字化装配系统中机身交点孔加工方法研究

针对传统交点孔加工方法加工精度低且存在回弹变形的问题,设计了一种满足飞机大部件数字化装配要求的机身交点孔精加工方法,根据交点孔的加工特性完成了机身定位与固持、数控加工中心定位以及加工工艺的总体设计,确定了交点孔加工程序原点的计算方法和编程原则,最后通过交点孔试切加工试验验证了加工方法的可行性。     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

微小孔电化学去毛刺试验研究

采用电化学方法对不锈钢管壁上钻削的微小孔与不锈钢管内壁相贯处难到达区域的毛刺进行去除。实验研究了加工时间、电解液成分与浓度、电解液流动方式对微小孔毛刺去除质量的影响以及相应条件下阴阳极极间电压的变化规律。研究结果表明:在优选的加工工艺参数条件下,可有效地去除微小孔毛刺。