基于光场成像的快照式气膜孔三维测量技术

叶片气膜孔的几何参数对其冷却效率具有十分重要的影响，需采取有效手段对加工的气膜孔几何参数进行检测。基于光场成像原理，初步探索了单光场相机快照式三维测量技术在气膜孔检测上的应用。与其他光学测量技术相比，该技术仅通过一次拍摄，即可快速从捕获的单张原始光场图像中计算得到气膜孔的三维点云数据，其数据采集效率很高。实验中对一组标准量块进行了测量，展示了单光场相机应用于工业级精密测量的潜力。对实际叶片上气膜孔几何参数的检测结果初步表明了该技术应用于气膜孔三维测量的可能性。由于单光场相机成像系统的结构简单，易于操作且便于与其他传感器设备集成，可为气膜孔三维测量问题提供一种新的解决方案。     

A two-step robust adaptive filtering algorithm for GNSS kinematic precise point positioning

In kinematic navigation and positioning, abnormal observations and kinematic model disturbances are one of the key factors affecting the stability and reliability of positioning performance. Generally, robust adaptive filtering algorithm is used to reduce the influence of them on positioning results. However, it is difficult to accurately identify and separate the influence of abnormal observations and kinematic model disturbances on positioning results, especially in the application of kinematic Precise Point Positioning (PPP). This has always been a key factor limiting the performance of conventional robust adaptive filtering algorithms. To address this problem, this paper proposes a two-step robust adaptive filtering algorithm, which includes two filtering steps: without considering the kinematic model information, the first step of filtering only detects the abnormal observations. Based on the filtering results of the first step, the second step makes further detection on the kinematic model disturbances and conducts adaptive processing. Theoretical analysis and experiment results indicate that the two-step robust adaptive filtering algorithm can further enhance the robustness of the filtering against the influence of abnormal observations and kinematic model disturbances on the positioning results. Ultimately, improvement of the stability and reliability of kinematic PPP is significant.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

晶体取向对第四代单晶高温合金DD15高周疲劳性能的影响

在定向炉中分别采用籽晶法制备了[001]、[011]和[111]3种不同取向的第四代单晶高温合金DD15,在800℃研究了不同取向的高周疲劳性能,分析了合金不同取向的显微组织、疲劳断口形貌和疲劳断裂组织。结果表明:在凝固方向横截面上不同取向合金的铸态枝晶和热处理γ′相组织明显不同。合金800℃的高周疲劳性能存在各向异性,疲劳极限按[111]、[001]、[011]取向的顺序降低。不同取向合金的高周疲劳都是沿平面断裂,断裂平面与试样中心应力轴线的角度不同,角度按[011]、[001]、[111]取向的顺序逐渐减小。不同取向高周疲劳断口特征基本相同,可见疲劳源区、疲劳扩展区和瞬断区。疲劳裂纹起源于试样表面或亚表面并沿{111}平面扩展。扩展区上可见河流状花样和疲劳条带。瞬断区可见撕裂棱和解理台阶特征,其断裂机制都为类解理断裂。由于试验温度较低,不同取向疲劳断裂后的γ′相仍保持立方形状。     

小卫星侦察星座性能评估研究

针对小卫星侦察星座性能评估问题，从覆盖、成本和弹性三方面对小卫星侦察星座的性能指标进行研究，分别构建了考虑存储容量约束的覆盖能力评估模型、成本估计模型以及弹性能力评估模型。在覆盖能力评估模型中，将卫星存储容量作为约束条件，结合卫星覆盖几何模型分析了卫星对地侦察的工作条件，提出考虑存储容量的覆盖指标计算方法；通过小卫星成本模型(small satellite cost model,SSCM)对星座各分系统的成本进行估计；在弹性评估模型中，提出了星座性能损失率指标，并根据星座失效状态概率函数确定了不同失效状态下星座性能损失率的权重。将上述模型应用于SkySat和吉林一号星座的性能评估过程中，结果表明SkySat比吉林一号覆盖能力强、成本低，弹性差。提出的三个模型可用于评价星座优劣，为小卫星侦察星座的建设和性能评估工作提供参考。     

椭圆轨道卫星对地全球覆盖电推进控制

针对椭圆轨道卫星近/远地点的星下点对全球或特定纬度区域的访问问题，提出一种连续小推力下的对地覆盖控制策略。首先，推导了自然摄动对卫星拱线变化的影响，并探讨了进行小推力覆盖控制的必要性。然后，针对燃料消耗的优化问题，将控制方程展开成含傅里叶级数的形式，用以获得便于星上计算的解析形式的次优解，同时探讨了截取阶数与优化程度的关系。在进行拱线控制的同时，通过合理设置约束，对椭圆轨道的近地点高度进行保护，确保卫星安全运行。仿真结果表明，提出的方法能够以适当的燃料消耗代价实现椭圆轨道的近/远地点的全球覆盖控制或特定纬度区域的反复推扫，且控制力在可接受的范围内。     

Using TensorFlow-based Neural Network to estimate GNSS single frequency ionospheric delay (IONONet)

In the last 20?years, and in particular in the last decade, the availability of propagation data for GNSS has increased substantially. In this sense, the ionosphere has been sounded with a large number of receivers that provide an enormous amount of ionospheric data. Moreover, the maturity of the models has also been increased in the same period of time. As an example, IGS has ionospheric maps from GNSS data back to 1998, which would allow for the correlation of these data with other quantities relevant for the user and space weather (such as Solar Flux and Kp). These large datasets would account for almost half a billion points to be analyzed. With the advent and explosion of Big Data algorithms to analyze large databases and find correlations with different kinds of data, and the availability of open source code libraries (for example, the TensorFlow libraries from Google that are used in this paper), the possibility of merging these two worlds has been widely opened. In this paper, a proof of concept for a single frequency correction algorithm based in GNSS GIM vTEC and Fully Connected Neural Networks is provided. Different Neural Network architectures have been tested, including shallow (one hidden layer) and deep (up to five hidden layers) Neural Network models. The error in training data of such models ranges from 50% to 1% depending on the architecture used. Moreover, it is shown that by adjusting a Neural Network with data from 2005 to 2009 but tested with data from 2016 to 2017, Neural Network models could be suitable for the forecast of vTEC for single frequency users. The results indicate that this kind of model can be used in combination with the Galileo Signal-in-Space (SiS) NeQuick G parameters. This combination provides a broadcast model with equivalent performances to NeQuick G and better than GPS ICA for the years 2016 and 2017, showing a 3D position Root Mean Squared (RMS) error of approximately 2?m.     

Estimating inter-system biases for tightly combined Galileo/BDS/GPS RTK

The overlapping carrier frequencies L1/E1, L5/E5a and B2/E5b from GPS/Galileo/BDS allow inter-system double-differencing of observations, which shows a clear advantage over differencing of the observations of each constellation independently. However, the inter-system biases destroy the integer nature of the inter-system double-differencing ambiguities. Two methods of direct rounding and parameter estimation are used to determine the ISB value. By analyzing data collected from Curtin University from 2015 to 2018, the phase and code inter-system bias (ISB) are related to the receiver type, firmware version and the selected overlapping frequency. Upgrade of receiver firmware version results in changes of ISB values. For example, the upgrade of Javad firmware in Dec, 15, 2017 causes the difference of 0.5 cycles ISB between BDS GEO and non-GEO satellites. By comparing the three dynamic models which include white noise process, random walk process, and random constant in the parameter estimation method, the ISB determined by the random constant model is consistent with the value obtained by the direct rounding method. After the calibration of ISBs, the performances of tightly combined positioning are assessed. The success rate of ambiguity resolution and accuracy of positioning for the tight combination (TC) are significantly improved in comparison with that for the loose combination (LC) over short baselines. For L5/E5a, on which only few satellites can be observed, the maximum increase in success rates of ambiguity resolution can reach 31.7%, i.e., from 54.9% of LC to larger than 86.6% of TC, and the positioning accuracies can even be increased by 0.13 m, i.e., from 0.208 of LC to 0.074 m of TC in East direction for the mix-receiver TRIMBLE NETR9-SEPT POLARX4 in 2018.     

基于全局稀疏地图的AGV视觉定位技术

为了实现自动导引车（AGV）在复杂工业环境下的高精度定位，克服环境变化给定位带来的影响，提出了基于全局稀疏地图的视觉定位方法。首先，设计了大容量二维编码点，作为人工路标铺设在工业环境的地面；然后，基于一种四边形识别算法，在复杂工业环境中准确分割和识别二维编码点；最后，利用二维编码点提供的编码信息，鲁棒匹配图像中的特征点，并以此为基础，使用一种分参数块优化的三维重建策略，实现了工业环境的大规模地图构建，为AGV视觉定位提供了一种稀疏电子地图。AGV视觉的定位通过匹配车载视觉传感器图像中的特征点和稀疏电子地图实现。停车重复定位精度小于0.5 mm，角度偏差小于0.5°，轨迹平均位移误差小于0.1%。实际应用结果表明，该方法能在复杂工业环境中实现AGV视觉的定位，定位的速度和精度方面都满足工业应用的要求，为AGV的视觉定位提供了新的思路。