排序方式: 共有44条查询结果,搜索用时 15 毫秒
1.
《中国航空学报》2020,33(2):501-507
Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation. 相似文献
2.
3.
4.
本文从相似理论到风洞实验,用大量的论据和事实、说明了风洞实验数据的精度,并不取决于风洞尺寸的大小,而只取决于实验条件及模型尺寸满足N-S方程的解的近似程度。文中讨论了怎样大小尺寸的风洞,既满足了空气动力学的研究发展和型号试验,又适合我国国情的经济性要求这个人们普遍关心的问题。最后介绍了NASA给出的一组能较好满足上述两方面要求,且具有某种唯一性条件的不同Mach数范围下的风洞最好尺寸,供有关部门和人员参考 相似文献
5.
6.
本文提出了获得歼击机发动机载荷剖面的相似转换法。通过应用飞行力学基本方法,以推力作为转换的核心,可以由一种实测的基准机剖面得到其它类似机型的剖面。本文提出的方法在实际工程中已得到应用。 相似文献
7.
为指导全流量补燃循环发动机推力室全尺寸气气喷注器设计,采用气氢/气氧推进剂,在带可视化窗口的燃烧室中开展了气气燃烧流场相似性缩尺试验研究。采用高速摄影仪获得了不同流量工况下,同轴剪切喷嘴稳定燃烧和不稳定燃烧两种状态下近喷嘴区域的燃烧火焰结构,并分析了不稳定燃烧的频率特性。结果表明:在保持推进剂种类、推进剂混合比、推进剂温度、燃烧室及喷嘴结构尺寸不变的情况下,随着喷嘴流量的逐步增大,稳定燃烧和不稳定燃烧的喷嘴出口火焰结构均有一定的相似性,且不稳定燃烧的频率相同。 相似文献
8.
在室内WiFi环境下,针对常见指纹匹配算法所忽略的信号波动问题,提出了一种基于自适应修正曼哈顿距离和AP选择的指纹匹配算法,并结合加权K近邻方法实现定位。首先采用AP选择算法获取部分受干扰程度小和出现频率高的AP,在指纹匹配时仅使用该部分AP的接收信号强度进行计算;在分析WiFi信号传播衰减公式和信号波动的基础上,提出了将自适应修正曼哈顿距离作为指纹匹配的度量距离,使用该距离旨在平滑信号波动对指纹相似度计算的影响;最后采用加权K近邻方法估计测试点的坐标。实验结果表明,在加权K近邻方法的框架下,基于自适应修正曼哈顿距离的定位算法在定位精度上优于基于欧氏距离、曼哈顿距离、余弦距离和Sorensen距离的定位算法。 相似文献
9.
置信度评估能够为卫星导航模拟器的研制与改进提供依据。提出了一种基于对数最小二乘的模糊层次分析法和相似度法相结合的置信度评估方案。该方案利用基于对数最小二乘的模糊层次分析法将卫星导航模拟器系统分解为若干子系统或模型,并利用相似度法计算各个子系统或模型的置信度,同时使用模糊层次分析法计算各子系统或模型的权重向量,而后再逐级综合得到模拟器系统的总置信度。该方案能够将复杂系统逐层细化,且求解的子系统或模型的权重向量与置信度较为客观真实,具有重要的工程参考价值。 相似文献
10.
在分析了传统刀具选配模式存在的不足的基础上,对基于知识重用的刀具选择技术进行了研究.采用实例推理技术进行刀具智能选择,对刀具智能选择过程中涉及的特征提取、知识表示、检索策略、相似度计算等实例推理的关键技术进行了研究. 相似文献