基于光滑粒子流体动力学方法的液滴蒸发问题数值模拟研究

基于光滑粒子流体动力学方法（Smoothed Particle Hydrodynamics，SPH），开展了SPH新算法在蒸发燃烧领域的研究。建立了适用于SPH方法的蒸发数值模型，推导了基于傅立叶热传导公式和菲克扩散定律的SPH离散方程；借鉴VOF方法（Volume of Fluid）的思想，提出了SPH粒子的液相质量分数的概念，以有效表征蒸发过程中的相变问题。采用SPH方法对高温环境中单个液滴的蒸发过程进行数值模拟，结果符合D2定律，与理论模型相一致；在强迫对流环境中，液滴的蒸发过程受到对流作用及表面张力的影响，蒸发速率加快；进一步对双液滴在静止、对流环境中的蒸发过程进行数值模拟研究。结果表明，液滴的间距、滴径对多个液滴的蒸发过程影响至关重要，液滴间距至少在两倍的液滴直径以上，相互之间的影响才可以近似忽略。通过本文研究，拓宽了SPH方法在蒸发相变领域的应用范围，研究结果也能够为进一步的燃烧问题研究奠定基础。     

基于PAM-CRASH的蒙皮典型结构高速冲击仿真

以典型蒙皮结构为研究对象，分别对由2024－T3铝合金和碳纤维复合材料交替层压而成的FMLs以及2024－T3铝合金蒙皮进行高速冲击有限元仿真，并进行了损伤对比。其中，铝合金层和碳纤维层均采用最大应变准则。利用碰撞模拟分析软件PAM-CRASH以及采用SPH弹体对冲击模型进行仿真，结果显示在相同冲击能量下，加了支承结构的蒙皮在损伤抗性方面有了明显提升，并在此基础上分析不同的纤维铺层角度和铺层方式对FMLs蒙皮性能的影响。     

Numerical simulation of a rotary engine primary compressor impacted by bird

In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic (SPH) method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird’s mass is affected by the bird’s configuration. In the event of bird striking on the site of"up"some blades may develop plastic deformation and it is very adverse for the safety work of the engine.     

High velocity impact characterization of Al alloys for oblique impacts

This paper describes the experimental and computational analyses of a high velocity aluminum projectile impact on an Al6061-T6 spacecraft inner wall at different oblique angles. Al2017-T4 spherical projectiles of 5.56 mm in diameter and 0.25 g in weight were chosen within the velocity range of 1000±200 m/s due to the limitation of the light gas gun. The energy absorbed was calculated by measuring the velocities before and after impact on the inner wall. The energy absorbed by the wall and the remaining energy carried by the projectile helped to estimate the severity of further damage to inner components. Afterwards, validation was done by using the commercially available software LS-DYNA with a dedicated SPH. On average, a 10% energy absorption difference between experimentation and simulation was found. By using C-SCAN, the damage area proportion of the total inner wall to impact penetration hole area was found to be on average 6%, 26% and 53% greater than the projectile cross sectional area for the oblique angle impacts of 30°, 45°, and 60°, respectively. These findings helped to understand the relationship between the oblique impact event and the damage area on a spacecraft inner wall along with space debris cloud propagation and comparison with experimental results using LS-DYNA.     

空间碎片超高速碰撞数值模拟的SPH方法

利用光滑质点动力学SPH(Smoothed Particle Hydrodynamics)方法对Whipple防护结构在空间碎片超高速碰撞下的物理过程进行了数值模拟.在数值模拟中,为了充分发挥SPH方法和有限元方法FEM(Finite Element Method)的优点,利用有限元单元和SPH节点混合建模,将有限元单元和SPH节点(SPH nodes)通过定义接触条件相结合,在大变形和飞溅区域采用SPH节点建模,而小变形区域则采用有限元单元建模,从而大大节省求解时间,提高计算效率.计算结果表明,弹丸在穿透前板后,形成二次碎片,碎片云经膨胀和拉长,对后板造成轻微的损伤,这和文献的相关试验数据是符合的.利用SPH方法对空间碎片的超高速碰撞过程进行数值模拟,不仅很好地预测了Whipple防护结构的破坏情况,而且对整个碰撞过程,包括碎片云的形成、膨胀和拉长过程都有形象的描述,符合超高速碰撞的试验测试结果.     

SPH方法对气液两相流自由界面运动的追踪模拟

气液两相流动是自然界中常见的流动现象,对其进行数值模拟时要求必须能够准确跟踪界面运动变形。本文利用光滑粒子流体动力学方法,结合微可压缩模型(SCM),引入界面控制方法XSPH速度修正以及Van Derwaals状态方程修正,对典型的气液两相流动如二维溃坝、气泡上浮等问题进行了数值模拟,分析了空气和水相互作用机理以及界面运动规律,并同实验结果和其他数值计算结果进行了比较。结果表明,该方法在模拟多相介质界面运动问题准确有效,可用于处理更为复杂的多相流动工程问题。     

飞机副油箱液体晃动动力学分析

针对液体晃动重心变化对航空航天器、载液货船等载液系统运动及姿态稳定性的影响,结合某型飞机副油箱的晃振试验,采用光滑粒子流体动力学（SPH）方法对该油箱进行了5个晃动周期的数值模拟。推导了任意时刻液体晃动重心的计算表达式,获得了晃动过程中的液体重心变化时间历程曲线,体现了周期性激励作用下液体晃动轨迹的周期性。     

Mass and performance optimization of an airplane wing leading edge structure against bird strike using Taguchi-based grey relational analysis

Collisions between birds and aircraft are one of the most dangerous threats to flight safety. In this study, smoothed particles hydrodynamics (SPH) method is used for simulating the bird strike to an airplane wing leading edge structure. In order to verify the model, first, experiment of bird strike to a flat aluminum plate is simulated, and then bird impact on an airplane wing lead-ing edge structure is investigated. After that, considering dimensions of wing internal structural components like ribs, skin and spar as design variables, we try to minimize structural mass and wing skin deformation simultaneously. To do this, bird strike simulations to 18 different wing structures are made based on Taguchi’s L18 factorial design of experiment. Then grey relational analysis is used to minimize structural mass and wing skin deformation due to the bird strike. The analysis of variance (ANOVA) is also applied and it is concluded that the most significant parameter for the performance of wing structure against impact is the skin thickness. Finally, a validation simu-lation is conducted under the optimal condition to show the improvement of performance of the wing structure.     

Consideration on aircraft tire spray when running on wet runways

The tire spray produced by aircraft running on wet runways may enter the intake of engines, which may lead to the compressor stall, surge, or even combustion flameout. Therefore, it is necessary to do some research work on the tire spray to help to solve this problem. Firstly, the mechanism of tire spray is analyzed, and some parameters are defined to describe the spray pattern. Secondly, the numerical model of tire spray is established by coupled Smoothed Particle Hydrodynamics (SPH) and Finite Element Method (FEM) in LS-DYNA software, and the model is validated by a simplified water spray experiment. Then some influence factors on the spray pattern are studied by numerical simulation. Finally, some suggestions are proposed on different types of aircraft to avoid too much tire spray being ingested into the engine intakes.     

A numerical model for bird strike on sidewall structure of an aircraft nose

In order to examine the potential of using the coupled smooth particles hydrodynamic(SPH) and finite element(FE) method to predict the dynamic responses of aircraft structures in bird strike events, bird-strike tests on the sidewall structure of an aircraft nose are carried out and numerically simulated. The bird is modeled with SPH and described by the Murnaghan equation of state, while the structure is modeled with finite elements. A coupled SPH–FE method is developed to simulate the bird-strike tests and a numerical model is established using a commercial software PAM-CRASH. The bird model shows no signs of instability and correctly modeled the break-up of the bird into particles. Finally the dynamic response such as strains in the skin is simulated and compared with test results, and the simulated deformation and fracture process of the sidewall structure is compared with images recorded by a high speed camera. Good agreement between the simulation results and test data indicates that the coupled SPH–FE method can provide a very powerful tool in predicting the dynamic responses of aircraft structures in events of bird strike.