逆金字塔式安全着陆点选择方法

针对现有地外天体软着陆安全着陆点选择方法的不足,设计了逆金字塔式安全着陆点选择方法,结合着陆器的落点精度和自主避障及地形坡度适应能力,建立了基于平整点、安全着陆点、可靠避障点和标称着陆点的地形安全性分析与定量搜索模型,该模型呈四层逆金字塔结构,每一层搜索的结果作为下一层搜索的输入,从弱约束到强约束逐步收敛至100%地形安全着陆区,嫦娥五号探测器飞行结果表明该方法能够快速确定安全着陆区及标称着陆点,并有效指导着陆下降过程的标称航迹设计和轨道控制策略制定。     

PMSM电流预测控制参数误差量化分析方法

交流永磁同步电机（PMSM）电流环控制性能是制约交流伺服系统性能的关键。电流预测控制拥有更快的动态响应、更低的电流谐波和优良的转矩响应，但该算法依赖精确的电机模型，参数失配会引发稳态电流误差，无法输出额定转矩，进而导致电机转矩输出效率降低。根据永磁同步电机电流预测模型，详细分析了d、q轴电流静差产生的原因，以及电流预测控制对电机参数误差的敏感性，提出了一种参数误差量化分析方法。该方法引入了电机参数偏差因子，量化描述了电机电感、磁链参数误差与电流静差之间的制约关系。通过仿真分析，验证了所提方法的合理性，为高性能永磁伺服电流预测数字控制技术打下了良好基础。     

Theoretical modeling of vectoring dual synthetic jet based on regression analysis

The excellent vectoring characteristic of Dual Synthetic Jet (DSJ) provides a new control strategy for the active flow control, such as thrust vectoring control, large area cooling, separated flow control and so on. For incompressible flow, the influence relation of source variables, such as structure parameters of actuators, driving parameters and material attributes of piezoelectric vibrating diaphragm, on the vectoring DSJ and a theoretical model are established based on theoretical and regression analysis, which are all verified by numerical simulations. The two synthetic jets can be deemed as a main flow with a higher jet velocity and a disturbing flow with a lower jet velocity. The results indicate that the influence factors contain the low-pressure area formed at the exit of the disturbing flow, which could promote the vectoring deflection, and the impact effect of the disturbing flow and the suppressive effect of the main flow with the effect of restraining the vectoring deflection. The vectoring angle is a complex parameter coupled by all source variables. The detailed theoretical model, whose error is controlled within 3.6 degrees, can be used to quantitatively assess the vectoring feature of DSJ and thus to provide a guidance for designing the control law applied in the active flow control.     

Design of nanofluid-cooled heat sink using topology optimization

The paper presented topology optimization of 2D and 3D Nanofluid-Cooled Heat Sink (NCHS). The flow and heat transfer problem in the NCHS was treated as a single-phase nanofluid based convective heat transfer model. The temperature-dependent fluid properties were taken into account in the model due to the strong temperature-dependent features of nanofluids. An average temperature minimum problem was studied subject to the fluid area and energy dissipation constraints by using the density method. In the method, the design variable is updated according to the gradient information obtained by an adjoint based sensitivity analysis process. The effects of the energy dissipation constraint, temperature-dependent fluid properties and nanofluid characteristics on optimal configurations of NCHS were numerically investigated with following conclusions. Firstly, branched flow channels in the optimal configuration increased with the rise of the allowed energy dissipation. Secondly, temperature-dependent fluid properties were significant for obtaining the appropriate optimal results with best cooling performance. Thirdly, heat transfer performances of optimal configurations were enhanced by reducing the nanoparticle diameter or increasing the nanoparticle volume fraction. Fourthly, the optimal configuration for nanofluid had better cooling performance than that for its base fluid.     

航天嵌入式软件数组越界缺陷特征研究

根据统计,数组越界是航天嵌入式软件开发过程中出现最多且最容易被遗漏的缺陷类型之一.目前自动化检测数组越界多基于抽象解释、符号执行、程序模型检验等方法,这些方法在误报、漏报、可扩展性等方面的表现依赖于软件及缺陷特征.分析了近三年航天嵌入式软件第三方测试中发现的94个数组越界问题,从缺陷模式和缺陷表现形式两方面分析得出10项航天嵌入式软件数组越界缺陷特征,并提出对设计具体检测方法关键的若干启示.进一步基于这些特征和启示探讨了数组越界检测算法针对中断驱动型程序的改进方向.     

航天器自主导航状态估计方法研究综述

自主导航是航天器自主运行的核心关键技术。状态估计是实现航天器自主导航的核心手段，是指实时确定航天器在轨位置、速度和姿态等导航参数，是航天器自主导航技术的重点发展方向之一。首先，针对航天器自主导航的实际需求，阐述了研究航天器自主导航状态估计方法的必要性，具体从导航系统可观测性分析、导航滤波算法、导航系统误差补偿3个方面介绍了航天器自主导航状态估计方法的研究现状；然后，分析并总结状态估计方法在航天器自主导航系统中的实际应用；最后，结合理论研究和实际应用，给出了状态估计方法目前存在的主要问题并对其后续发展进行了展望。     

Weibull分布参数估计值对细节疲劳额定强度的影响

将新材料、新工艺应用于民机结构设计时，细节疲劳额定强度（DFR）法仍是重要的评估方法。根据新型铝合金疲劳试验数据，全面分析了Weibull分布形状参数对DFR计算参数的影响；分析标准S-N曲线斜度参数对DFR的影响时，应考虑可靠性寿命的变化，采用低可靠度寿命计算曲线斜度参数可降低Weibull分布形状参数的影响；比较了采用不同分布参数估计值与传统上采用波音公司给定值进行DFR计算的差异。结果表明，对于通过符合性检验的试验数据，使用不同Weibull分布的参数估计值计算得到的DFR都大于按传统方法（用波音公司给定值）的计算结果，其中，三参数Weibull分布计算的DFR最大，至少增加10%以上。     

基于AFI混合聚类算法的轴承故障诊断方法

针对滚动轴承振动信号标记数据量小、故障模式多样的现状，提出了一种基于AFI混合聚类算法的半监督式轴承振动信号故障诊断方法。利用小波包分解方法提取了信号的能量特征谱，并通过主成分分析方法增强了信号的特征；参考迭代自组织数据分析的“分裂”和“合并”的思想，为人工鱼群算法中的个体鱼增加了“分裂进化”和“合并进化”行为；采用模糊C均值方法定义了隶属度矩阵和目标函数，并利用改进的人工鱼群算法，迭代搜寻了目标函数的全局最优解，得到了各故障模式的聚类中心；通过计算测试数据的最近邻聚类中心，实现了故障模式识别。结果表明，该方法无需指定聚类簇数，能在标记数据量小的情况下完成训练，较同类方法表现出了更优的故障模式识别性能。     

A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.