螺旋桨滑流对发动机进气道气动性能的影响

针对螺旋桨/短舱/进气道一体化构型,采用多重参考系(MRF)法和滑移网格非定常法进行了数值模拟研究,实现了螺旋桨/短舱/进气道一体化内外流耦合流场仿真,研究了不同工况下螺旋桨滑流对进气道气动性能的影响,并与无桨构型的进气道性能进行了对比,最后通过数值分析解释了螺旋桨桨盘后总压上升的原因。结果表明:多重参考系法和滑移网格非定常法对进气道出口的时均参数的计算结果吻合较好,多重参考系法可用于螺旋桨及进气道的气动性能参数计算;螺旋桨做功使进气道总压恢复系数增高,螺旋桨转速越大,总压恢复系数的增量就越大,且螺旋桨滑流使进气道出口畸变指数明显增大;通过数值分析推导的桨盘前后总压关系公式与仿真结果的误差均在3%以内。      

无刷双馈电机静止坐标系数学模型的研究

由于没有电刷和滑环,提高了运行的可靠性,降低了维护成本,因此无刷双馈电机(BDFM)在变速恒频发电领域有着广阔的应用前景。由于特殊的结构和工作原理,BDFM数学模型十分复杂。从BDFM多回路空间矢量数学模型出发,推导出了两个静止坐标系之间的坐标变换关系以及功率绕组静止坐标系数学模型和控制绕组静止坐标系数学模型,推导过程简洁明了。所得结果为BDFM理论分析和不同控制策略的研究提供了理论基础。MATLAB/Simulink环境下的仿真结果验证了数学模型及坐标变换关系的正确性。     

北斗空间信号误差统计特征及描述方法研究

通过对比北斗卫星导航系统(BeiDou Navigation Satellite System,BDS)广播星历与事后精密星历,提取了轨道和卫星时钟误差。基于北斗轨道误差及北斗卫星时钟误差统计特征分析,构建区别于全球定位系统(Global Positioning System,GPS)的BDS空间信号用户测距误差(Signal-In-Space User Range Error,SISRE)描述方法,对BDS广播星历中用户测距精度(User Range Accuracy,URA)进行了验证。6个月的北斗数据测试结果表明,北斗GEO、IGSO和MEO卫星的URA分别为3.0m、1.9m和1.6m。     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

BLKF方法抑制MEMS惯性传感器随机噪声

针对微机电系统（MEMS）惯性传感器应用卡尔曼滤波（KF）处理数据时随机噪声难以估计的缺点，提出一种基于贝叶斯拉普拉斯卡尔曼滤波（BLKF）的随机噪声更新方法。该方法利用拉普拉斯近似算法，将贝叶斯边缘分布近似表示，能够避免贝叶斯方法更新过程中由于数据维数较大造成后验边缘分布较难估计的情况，提高对随机噪声的更新效率和精度。通过陀螺仪转台实验采集实验数据，运用KF与BLKF分别滤波。对比滤波结果可发现，BLKF比KF能更好地反映真实角速度状态。同时，在陀螺仪角速度变化时，BLKF的可靠性和准确性更高，滤波效果更具优势，能够达到抑制MEMS惯性传感器随机噪声的目的。     

A null frame for spacetime positioning by means of pulsating sources

We introduce an operational approach to the use of pulsating sources, located at spatial infinity, for defining a relativistic positioning and navigation system, based on the use of four-dimensional bases of null four-vectors, in flat spacetime. As a prototypical case, we show how pulsars can be used to define such a positioning system. The reception of the pulses for a set of different sources whose positions in the sky and periods are assumed to be known allows the determination of the user’s coordinates and spacetime trajectory, in the reference frame where the sources are at rest. We describe our approach in flat Minkowski spacetime, and discuss the validity of this and other approximations we have considered.     

FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

ADS-B监视下飞行间隔评估方法研究

广播式自动相关监视（ADS-B）技术推广使用的首要问题是间隔标准的确定,为此ADS-B下飞行间隔的评估就成为亟待解决的问题。采用与基准系统进行比较的方法,对ADS-B监视下的飞行间隔的安全评估方法进行了研究。建立了ADS-B监视下的危险接近概率模型,确定了ADS-B下飞行间隔的研究方法,对雷达监视和ADS-B监视下的危险接近概率进行比较分析,在不低于雷达监视的安全目标水平下确定出ADS-B监视下对应的最小间隔。研究结果表明：在不低于雷达监视的安全目标水平下,ADS-B监视下的飞行间隔标准更小,因此方法适用于国内ADS-B监视下的飞行间隔的评估。     

介质振荡器的设计

为了实现微型化相干布局囚禁（CPT）原子钟,需要设计出小体积、低功耗的微波电路。本文介绍了利用介质振荡器（DRO）实现的适合微型CPT原子钟的微波电路,首先利用ADS（Advanced Design System）软件实现了介质振荡器的仿真,然后根据仿真结果设计并实现了振荡器电路,测试结果表明：输出微波频率为3.4GHz、功率为-4dBm、功耗为37mW。