表面再结晶对定向凝固高温合金高周疲劳行为的影响

采用悬臂旋转弯曲试验,研究定向凝固DZ4合金在喷丸预变形及热处理后产生的再结晶层对高周疲劳寿命的影响.结果表明,DZ4合金经过一定程度的预变形,在随后的高温热处理后表面会产生一定厚度的再结晶;再结晶层对DZ4合金高周疲劳寿命有一定影响;在一定喷丸强度范围内,随喷丸强度增加,疲劳寿命先减小后增大.     

Thermal Fatigue Behavior of Ni_3Al Based Superalloy IC6E

The thermal fatigue behavior of Ni3Al based superalloy IC6E during the cycles between 900 ℃/1 000 ℃ and the room tempera-ture was investigated. The experimental results indicate that the primary and secondary thermal fatigue cracks initiate inside or round the borides and then spread away along grain boundaries and/or in interdendritic areas. The fracture of borides and their separation from the matrix at interfaces are mainly responsible for the crack initiation and its spreading. At temperatures higher than 1 000 ℃, the grain boundary oxidation combined with cyclic stresses accelerates the crack growth.     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

喷射沉积过程中显微组织的形成机制

通过对沉积还纵剖面的组织分析，发现沉积坯在进缘、上下表面及中心部位的显微组织明显不同。边缘及上下表面区试样的退火试验研究表明，细小的枝晶碎块在高温退火过程中发生凝共和粗化，并导致近球状晶粒组织的形成。试验确定其生长服从：D2-D02=6.37×1020e(-70036.1/T)·τ，晶界迁移激活能Qg=582KJ／mol。并依赖于两种机制：（1）在喷射沉积过程中无强烈变形枝晶的均匀化；（2）变形及断裂枝晶的生长和粗化。     

NiCoP合金包覆空心微珠粉体的制备

采用粉体化学镀技术，以AgNO3取代常见的贵金属盐PdCl2作为活化剂，H2PO2^-取代Sn^2 作为还原剂，在空心微珠表面包覆NiCoP合金。利用扫描电镜、能谱分析仪分析包覆层的形貌和成分。结果表明NiCoP合金均匀包覆在空心微珠表面。并提出了这种改进工艺的一种可能的机理。     

某飞机系列粉末合金刹车盘改进技术的研究

通过改进整盘钢骨架两面烧结粉末合金刹车盘的结构,直接成形卸荷槽,取消冲卸荷槽工序,完全解决该刹车盘长期存在的在后续加工及使用过程中的掉块问题。     

断续 CBN 砂轮缓进给磨削 K417 航空叶片材料的研究

 全面比较了用Al2O3和CBN磨削K417铸造高温合金时的磨削效果，指出：Al2O3不适于高效磨削K417之类的航空难加工材料，而CBN是实现该材料高效深切磨削的有效工具。通过大量实验，验证了断续CBN砂轮缓进给磨削K417时的技术优势，解决了树脂结合剂应用于断续磨削时所遇到的新问题。分析显示出该技术具有很好的应用前景和极大的推广价值。     

P／MRene＇95合金缓冷处理与等温变形研究

本文对Ｐ／ＭＲｅｎｅ＇９５合金缓冷处理与等温变形进行了研究，探索采用缓冷处理降低合金等温变形时流变应力的可行性，煅造出φ２２０ｍｍ的涡轮盘试件。结果表明：缓冷处理改变了合金中γ＇相的尺寸和分布，对合金流变应力具有显著的影响，可促进等温变形时动态回复和动态再结晶的发生，细化晶粒。φ２２０ｍｍ涡轮盘的力学性能达到了技术规范的要求。     

Ni基单晶叶片粘塑性分析

从位错滑移机理出发，建立了一种适用于Ｎｉ基高温单晶结构分析用的晶体滑移粘塑性本构模型。该模型将八面体、十二面体及六面体滑移系作为潜在的开动滑移系，考虑阻应力和背应力两种内应力状态参量。利用某Ｎｉ基单晶叶片材料在７００℃和９５０℃的试验结果对模型进行了考核并标定了模型参数。进而将所建模型编入有限元结构分析软件中，对某型发动机单晶叶片进行了计算分析。     

d—电子理论在单晶高温合金发展中的应用

对ｄ－电子理论在单晶高温合金发展中的应用进行了阐述。介绍了ｄ－电子理论和用此理论设计单晶高温合金的方法和过程。采用此理论对现有单晶合金进行了分析和讨论。