几何尺寸约束的超燃冲压发动机推力喷管设计

针对机体/推进系统一体化要求，提出了一种几何尺寸约束的超燃冲压发动机推力喷管设计方法，以实现在满足几何约束条件下优化喷管的气动性能。采用数值模拟对提出的设计方法展开了研究，在此过程中，首先校核了数值方法有效性并确定了网格分辨率。进一步就喷管设计过程中2个关键设计因子——比例因子和非对称因子开展了影响研究。最后为验证本文提出的设计方法的有效性和优越性，将其与典型截短设计方法进行对比分析。结果表明，相比截短方法，本文提出的设计方法不仅能够获得满足几何约束的喷管，同时可使喷管推力系数、升力和俯仰力矩分别提升33.36%、265.75%和37.21%。此外，本文提出的设计方法还可以通过调整设计因子来获得不同气动性能的喷管，进而满足应用过程中的实际需求。     

高速进气道抛罩过程内流场演化特性研究

为探究进气道整流罩打开过程中内流场的演化规律,针对下颌式进气道及其配套整流罩,基于重叠网格法求解N-S方程,详细分析了抛罩过程中内流场演化过程与特征流场结构。研究表明,堵罩时,整流罩前端发展出V形激波,整流罩尾部形成后向台阶且产生一对涡矢量方向相反的流向涡,开罩过程中,整流罩前端的V形激波与尾部的后向台阶均会对内流场流动产生影响,捕获流量在中间某时刻达到峰值且大于稳定状态。对于开罩过程流动准定常且内流道无大分离区的流场,进气道在V形激波打在唇口时完成起动且整流罩在此后不影响内流场流动。假设的匀加速转动与重构出的真实转动吻合较好,对于更精确的运动过程模拟可采用三次函数的角速度变化律。     

多臂空间机器人的视觉伺服与协调控制

针对多臂空间机器人自主目标抓捕任务，首先建立多臂空间机器人的运动模型和其与目标的相对运动模型，采用Kane方法建立多臂空间机器人的动力学模型；其次，研究基于视觉伺服的机械臂在线轨迹规划算法，并引入零反作用机动，消除机械臂运动对平台姿态的扰动；再次，在不使用零反作用机动功能时，分别使用基于角动量前馈补偿的协调控制算法和逆动力学方法设计了协调控制器，在机械臂运动时保持平台姿态和相对目标的位置。最后，开发了基于Matlab的仿真软件MASS（多臂空间机器人仿真），仿真结果校验了上述方法的有效性。     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

民用飞机舱门飞行锁机构接触力计算分析

研究飞机飞行锁机构中的接触力对于民用飞机飞行锁机构的设计具有重要意义。首先介绍飞行锁机构的功能和主要设计依据,阐明某民用飞机飞行锁机构的工作原理,并对其传力路径进行分析;然后采用工程算法、多刚体模型和多柔体模型三种计算方法计算飞行锁工作时曲柄与飞行锁摇臂之间的接触力;最后对三种计算方法进行对比,分析不同方法计算得到的接触力力值产生差异的原因。结果表明:多刚体模型计算值与工程算法计算值产生差异的主要原因是机构空行程导致的力臂变化,多柔体模型计算值与多刚体模型计算值产生差异的原因主要是受力过程中的结构变形。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

一种测量雷达散射截面参数现场校准方法

雷达散射截面参数是测量雷达一项非常重要的技术指标，该参数的准确性直接影响雷达对被测目标隐身能力的判定。基于雷达散射截面参数有源定标技术、高精度雷达散射截面模拟控制技术、高稳定雷达散射截面回波信号合成技术等，实现对雷达散射截面参数的动态精确模拟，从而对测量雷达散射截面参数进行校准，通过外场条件下的量值传递，解决了测量雷达散射截面参数有源定标问题。     

月面上升的轨迹优化与参数分析

面向月球采样返回任务分析需求,对月面上升段的轨迹优化及燃料消耗影响因素进行了研究。基于上升器运动模型,建立以燃料消耗最优为目标考虑入轨约束的轨迹优化模型,通过Gauss伪谱法和序列二次规划求解上升过程最优推力方向。改变运动模型中的初始推重比、入轨约束中的目标轨道参数,根据轨迹优化结果得到对应的燃料消耗,分析了这些因素对上升器燃料消耗的影响。针对上升器非共面起飞的问题,提出了上升偏航、升交点调整、倾角调整3种方案,从燃料消耗的角度分析了各方案的适用情况,为未来工程应用提供参考。     

Evaluation method for helicopter maritime search and rescue response plan with uncertainty

Helicopter plays an increasingly significant role in Maritime Search and Rescue (MSAR), and it will perform MSAR mission based on response plans when an accident occurs. Thus the rationality of response plan determines the success of MSAR mission to a large extent. However, with the impact of many uncertainty factors, it is difficult to evaluate response plans comprehensively before performing them. Aiming at these problems, an evaluation framework of helicopter MSAR response plan named UMAD is proposed in this paper, which reveals the influence mechanism of uncertainty factors based on Multi-Agent method and analyzes the mission flow based on Discrete Event System (DEVS) method. Furthermore, the evaluation criterion and indicators of response plan are extracted from the aspects of safety and effectiveness. Meanwhile, the Monte Carlo method is adapted to calculate the probability distribution and robustness of response plan comprehensive result. Finally, in order to illustrate the validity of this method, it is discussed and verified by an application example of evaluating multiple response plans to the same MSAR scenario. The results show that this method can analyze the influence of uncertainty more systematically and optimize response plans more comprehensively.     

民机驾驶舱触控显示系统人机工效评估指标体系搭建研究

从人机工效基本原理出发，在对国内外适航规章和行业标准解读的基础上，结合触控技术自身特征， 对触控显示系统人机工效设计的影响因素进行分析，并综合运用了改进德尔菲法和改进层次法，初步构建了民 机触控显示系统人机工效评估指标体系, 可为系统的设计与评估提供借鉴。