一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法。在拉氏步,流体力学方程组采用中心型间断有限元方法求解。对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标。界面重构采用一种健壮的MOF(Moment of Fluid)方法。在重映步提出了基于多边形相交的二阶积分守恒重映方法。该方法分为四个部分:多项式重构、多边形相交、积分和后验校正。多边形相交使用"剪裁投影"算法,显著降低了多边形相交算法的复杂度。后验校正是基于MOOD (Multi-dimensional Optimal Order Detection)限制策略,并做了一些改动以适应多介质的计算。数值算例表明,该方法具有二阶的精度和较好的鲁棒性。     

一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题，提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先，利用伪状态理论，通过简单迭代设计中途修正的初值，并通过Vinti预报方法修正了地球扁率的影响。然后，在求解精确解时，提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值，降低了求解地月转移轨道中途修正问题的难度，而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明，该算法可有效求解中途修正问题。     

Using TensorFlow-based Neural Network to estimate GNSS single frequency ionospheric delay (IONONet)

In the last 20?years, and in particular in the last decade, the availability of propagation data for GNSS has increased substantially. In this sense, the ionosphere has been sounded with a large number of receivers that provide an enormous amount of ionospheric data. Moreover, the maturity of the models has also been increased in the same period of time. As an example, IGS has ionospheric maps from GNSS data back to 1998, which would allow for the correlation of these data with other quantities relevant for the user and space weather (such as Solar Flux and Kp). These large datasets would account for almost half a billion points to be analyzed. With the advent and explosion of Big Data algorithms to analyze large databases and find correlations with different kinds of data, and the availability of open source code libraries (for example, the TensorFlow libraries from Google that are used in this paper), the possibility of merging these two worlds has been widely opened. In this paper, a proof of concept for a single frequency correction algorithm based in GNSS GIM vTEC and Fully Connected Neural Networks is provided. Different Neural Network architectures have been tested, including shallow (one hidden layer) and deep (up to five hidden layers) Neural Network models. The error in training data of such models ranges from 50% to 1% depending on the architecture used. Moreover, it is shown that by adjusting a Neural Network with data from 2005 to 2009 but tested with data from 2016 to 2017, Neural Network models could be suitable for the forecast of vTEC for single frequency users. The results indicate that this kind of model can be used in combination with the Galileo Signal-in-Space (SiS) NeQuick G parameters. This combination provides a broadcast model with equivalent performances to NeQuick G and better than GPS ICA for the years 2016 and 2017, showing a 3D position Root Mean Squared (RMS) error of approximately 2?m.     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

考虑多因素的可修系统任务可靠性分配方法

在实际工程中，系统常常是由串联、并联、旁联和表决等模型混合而成的复杂可修系统，目前此类系统的可靠性分配方法多采用等分分配等方法，得到的分配结果往往误差较大。本文提出了一种考虑维修、故障逻辑等多因素影响的可修系统任务可靠性分配方法。该方法以系统故障率为待分配指标，首先对包含维修影响的故障率进行转换，然后利用考虑故障逻辑的评分分配法进行分配，最后通过备件系数进行修正，获得分配结果。新方法能够为在实际工程中可修系统的任务可靠性分配提供一种简便易行的方法。      

电磁测力系统研究

介绍了电磁测力系统中静磁场分析与优化、通电线圈位置控制方法及提高线性度的自校准方法。运用Maxwell 3D进行仿真计算，得到了相对优化的磁密及磁均匀性，通过控制通电线圈在磁场中位置及分段线性微分技术，提高了电磁测力准确度。构建了试验装置，对比试验数据表明，该研究措施对于提高电磁测力准确度取得了较好效果。     

存储系统中两级纠错编码方案设计与验证

针对恶劣空间环境设计了一种两级存储编码方案，以应对航天系统中存储单元发生多个单粒子翻转（SEU）错误的问题。方案设计的主要思想是根据简单低纠错编码组合出高容错编码，通过编码组合，使用字间编码来纠正字内编码无法纠正的错误，从而使存储系统更加可靠；对两级编码方案提出若干优化策略，以提高编解码性能，使得两级冗余编码效率接近于原始字内编码。实验结果表明，提出的两级冗余编码方案能够较好解决存储系统中发生多个单粒子翻转错误的问题。即与单一的字内编码相比，两级纠错编码方案能够大大降低星上存储系统出现不可修复的概率，保证了星上存储系统的可靠运行。     

Data reduction and correction algorithm for digital real-time processing of cosmic ray measurements: NM64 monitoring at Dourbes

We present a data correction algorithm for real-time data processing for the NM64 galactic cosmic ray neutron monitor at the Royal Meteorological Institute (RMI) in Dourbes, Belgium. The correction is based on three main tests: a continuity test, tube ratios test and a derivative test. The continuity test works as a high pass filter with a threshold based on the entire recorded dataset. Additionally, it monitors whether the logging takes place at regular intervals (continuously). The ratios test identifies noisy sections and the final derivative test criterion will identify single or double spikes by testing them against the median increase of the intensities. Using these criteria, all data from the cosmic ray station at Dourbes is corrected in real time. Test results have been compared with data from verified neutron monitor stations with a similar geomagnetic cutoff rigidity.     

高精度UT1-UTC差分预报方法研究

针对卫星导航所需的高精度地球定向参数(EOP)中的UT1-UTC预报问题,提出了基于双差分LS+AR的UT1-UTC参数预报方法。对UT1-UTC观测数据进行跳秒检测、固体地球带谐潮汐项改正,然后对改正后的UT1-UTC数据进行双差分处理,增强数据平稳性;采用最小二乘拟合(LS)与自回归(AR)分析方法对差分处理后的数据进行分析与预报;对预报结果进行逆差分处理与潮汐项改正外推、跳秒恢复,获取高精度的UT1-UTC预报值。通过与国际EOP_PCC预报结果对比表明,UT1-UTC短期预报精度与EOP_PCC较优的预报精度相当,其中1天UT1-UTC预报精度优于0.03ms,优于EOP_PCC预报结果。介绍了北京航天飞行控制中心的UT1-UTC每日例行预报情况。     

可重复使用飞行器进场着陆拉平纵向控制

针对可重复使用飞行器（RLV）进场着陆拉平段的纵向控制问题，提出了反馈控制与前馈控制相结合的复合控制策略。设计反馈控制律参数，在此基础上基于时间加权高度跟踪误差/误差变化率平方积分指标优化设计前馈控制律参数。按输入补偿的前馈控制在不影响系统稳定性的前提下，提高了RLV对拉平着陆轨迹的跟踪精度，减小了RLV的接地散布。提出了基于积分器初值的控制律平滑切换方法，实现了RLV起落架释放前后不同控制律之间的平滑切换。仿真验证了拉平纵向复合控制和拉平过程中不同控制律之间平滑切换方法的有效性。